Setting up ASA8.4 in GNS3 with ADSM

[DJMK4]

Works fine from my laptop

ciscoasa# show int ip brief
Interface                  IP-Address      OK? Method Status                Protocol
GigabitEthernet0           10.10.10.1      YES manual up                    up
GigabitEthernet1           unassigned      YES unset  administratively down up
GigabitEthernet2           unassigned      YES unset  administratively down up
GigabitEthernet3           unassigned      YES unset  administratively down up
GigabitEthernet4           unassigned      YES unset  administratively down up
GigabitEthernet5           unassigned      YES unset  administratively down up
ciscoasa# ping 10.10.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/10/50 ms
ciscoasa#

Will have a play around with the lab machine, uninstall any GNS3 installation & topologies, loopback adaptors etc, make sure the software is all up to date and try again.

 

[GhostlyPea]

If you are referring to show version I done above ^^ I deleted the activation keys before I posted on here, on both occasions from scratch, the first one went in pretty much straight away on the device, the second one took around 5 minutes maybe a bit longer. I then wrote to flash and done a reload

When you say you had to enter one to make it work, make what work?

Im guessing that this is local activation rather than internet activation

Yeah just the activation key within GNS3, nothing else. See you got it working on the other machine anyway

- GP

 

[DJMK4]

Just rebuilt it on my lab machine in work, doesn't work, same issue

Everything was followed in the same steps, argh