Shimano Cassette MBT

Soldato
Joined
25 Nov 2011
Posts
20,663
Location
The KOP
Hi Guys
I am looking to replace some parts on my CUBE bike the cassette I have installed at the moment is Shimano CS-HG50, 11-36T but Halfords stock Shimano CS-HG50, 11-32T.
Are they much different? I am not very clued on bike parts.

My bike Specs
Build
FrameAluminium Lite, AMF, Internal Cable Routing, Easy Mount Kickstand Ready
ForkRock Shox Recon Silver TK SoloAir, PopLoc, 100mm
HeadsetFSA No.10, Semi-Integrated
StemCUBE Performance Stem Pro, 31.8mm
HandlebarCUBE Rise Trail Bar, 680mm
SaddleCUBE Active 1.1
SeatpostCUBE Performance Post, 27.2mm
PedalsCUBE Aluminium MTB
GripsCUBE Performance Grip
Groupset
Rear DerailleurShimano XT RD-M781-DSGSL, Shadow, Direct Mount, 10-Speed
Front DerailleurShimano Deore FD-M611 Downswing, 31,8mm
CrankShimano Deore FC-M612, 40x30x22T, 175mm
ShiftersShimano Deore SL-M610, Rapidfire-Plus
CassetteShimano CS-HG50, 11-36T
ChainShimano CN-HG54
BrakesShimano BR-M315, Hydr. Disc Brake (180/160)
Wheels
RimsCUBE ZX20, 32H, Disc
Front HubShimano Deore HB-M615, Centerlock
Rear HubShimano Deore FH-M615, Centerlock
TiresSchwalbe Smart Sam, Active, 2.25"
 
its the same part, but

11 is the smallest cog (t = amount of teeth)
36 is the big cog on one, or 32 teeth on the other

11-32 is a tighter range,

the larger the big cog the easier it is to pedal,

11-36 is a bigger range of gears,

HOWEVER you might have problems going to 32t as it would leave you with more chain slack (it might not be good as it might slap about more and might not even work great unless you shorten the chain) you might also find it harder riding up steep bits with a 32t vs 36


wiggle has the one you need for £37

there is a cassette lockring tool and you probably need a chainwhip to get it off as well

edit : word of warning as well, chaining the cassette you might find it doesnt like your chain anymore, they tend to wear as a pair and chainging cassette without chain you might find they dont mesh very well, chainrings can also have this problem, depending on how worn everything is
basically get a new bike :D a really expensive one is best lololol
 
Last edited:
its the same part, but

11 is the smallest cog (t = amount of teeth)
36 is the big cog on one, or 32 teeth on the other

11-32 is a tighter range,

the larger the big cog the easier it is to pedal,

11-36 is a bigger range of gears,

HOWEVER you might have problems going to 32t as it would leave you with more chain slack (it might not be good as it might slap about more and might not even work great unless you shorten the chain) you might also find it harder riding up steep bits with a 32t vs 36


wiggle has the one you need for £37

there is a cassette lockring tool and you probably need a chainwhip to get it off as well

edit : word of warning as well, chaining the cassette you might find it doesnt like your chain anymore, they tend to wear as a pair and chainging cassette without chain you might find they dont mesh very well, chainrings can also have this problem, depending on how worn everything is
basically get a new bike :D a really expensive one is best lololol

Thanks for this post I have now just learned a thing or two. I do plan on just replacing my chain first because I do belive its worn and with higher gears when pushing off I can skip the gear so I must make sure I am in a lower gear when stopping and starting. I just haven't used the bike correctly or looked after it either for that matter.
 
If your chain is that worn, you may have damaged the chain rings front and rear. You might need to replace the lot.

You could ask your local bike shop about going to a 1x setup as an option. But that will depend on lots of other factors, but it's worth mentioning as an idea.
 
Back
Top Bottom