Soldato
Had her since October, my first car 
Just washed
Just washed
Show Us Your Motors!
- Thread starter Lopéz
- Start date
Soldato
Sold my old Corsa and (for some mad reason) decided to buy another, so far though this ones been MUCH nicer to me Brought it a few weeks ago for a bargain price, bog standard, 2 owners, FSH etc etc.
Corsa Sport 1.6 16v on '99 T plate... few subtle mods so far such as: Lowered 60mm on a full suspension kit, K&N panel filter, drilled (only on inner wing side away from engine) and de-restricted airbox, debadged grill, powerflow catback exhaust.. bout it so far, got a few more plans yet though all subtle of course.
Brought it a few weeks ago for a bargain price, bog standard, 2 owners, FSH etc etc.Corsa Sport 1.6 16v on '99 T plate... few subtle mods so far such as: Lowered 60mm on a full suspension kit, K&N panel filter, drilled (only on inner wing side away from engine) and de-restricted airbox, debadged grill, powerflow catback exhaust.. bout it so far, got a few more plans yet though all subtle of course.
Associate
My Motor's
07 Focus ST225, 03 Focus LX.
Currently took the alloys off the 03 as the missus is learning to drive in it and will kerb the hell out of them.
07 Focus ST225, 03 Focus LX.
Currently took the alloys off the 03 as the missus is learning to drive in it and will kerb the hell out of them.
Last edited:
Underboss
I saw one of them today, not in Orange though!
was in black iirc
was in black iirc
ok this is my car
Engine
2.0 agg 8v engine
K&N 57i induction kit
Stainless Steel Induction Pipe
Shrick fast road cam
Scorpian cat back SS Exhaust
Champion Performance HT leads
Suspension
Bilstine Gas front/rear
Lowerd 85mm on Coilovers
Fully Polly bushed
Front upper,Front lower and Rear upper Strut Braces
Brakes
Front Drilled,grooved and vented front discs with Pagid Fast Road Pads
Rear Drilled and grooved discs with Pagid Fast Road Pads
Goodridge 6 Line Braided Brake Hoses
Red Callipers
Wheel's/Tyers
17" custom colour Alloys Fitted with Nankang NS-II 205/40/17's
ICE
Kenwood KDC-PSW9527 Headunit
Kenwood KFC-PPSR71P Components (rear) Powered by a Kenwood KAC-PS201 600w Amp
Kenwood KFC-PS1700P Components (Front) Powered by a Kenwood KAC-PS301 800w Amp
Kenwood 12" KFC-W3025DVC Subs X2 Powered by a Kenwood KAC-PS401M 1200w Amp
Engine
2.0 agg 8v engine
K&N 57i induction kit
Stainless Steel Induction Pipe
Shrick fast road cam
Scorpian cat back SS Exhaust
Champion Performance HT leads
Suspension
Bilstine Gas front/rear
Lowerd 85mm on Coilovers
Fully Polly bushed
Front upper,Front lower and Rear upper Strut Braces
Brakes
Front Drilled,grooved and vented front discs with Pagid Fast Road Pads
Rear Drilled and grooved discs with Pagid Fast Road Pads
Goodridge 6 Line Braided Brake Hoses
Red Callipers
Wheel's/Tyers
17" custom colour Alloys Fitted with Nankang NS-II 205/40/17's
ICE
Kenwood KDC-PSW9527 Headunit
Kenwood KFC-PPSR71P Components (rear) Powered by a Kenwood KAC-PS201 600w Amp
Kenwood KFC-PS1700P Components (Front) Powered by a Kenwood KAC-PS301 800w Amp
Kenwood 12" KFC-W3025DVC Subs X2 Powered by a Kenwood KAC-PS401M 1200w Amp
Soldato
Already posted mine however the host has died so,
Soldato
It's been a while since I posted here and all of my cars have changed!
'90 318iS
145k, FSH. Lowered, uprated suspension. Chipped & TB mod. Goes well enough
'00 Rover 1.3 Cooper
Only 55k but I've just rebuilt the bottom end and fitted a new box as the previous owner let it go too low. Car is immaculate - not a spot of rust and drives and looks like new.
'04 Landcruiser
The mobile billboard 118k and still going strong after 2 1/2 years of abuse.
'7x Mini Clubman
A project which I havent even bothered starting yet. Surprisingly solid!
'90 318iS
145k, FSH. Lowered, uprated suspension. Chipped & TB mod. Goes well enough
'00 Rover 1.3 Cooper
Only 55k but I've just rebuilt the bottom end and fitted a new box as the previous owner let it go too low. Car is immaculate - not a spot of rust and drives and looks like new.
'04 Landcruiser
The mobile billboard 118k and still going strong after 2 1/2 years of abuse.
'7x Mini Clubman
A project which I havent even bothered starting yet. Surprisingly solid!
Man of Honour
are those holes in the rear bumper?
Last edited:
Soldato
had her for a while now, but here my astra
X plate 2.216v SRi. standard bar the grill and irmscher rear clusters
got some nice scenic shots in layby just up road from my house, its so cool for pics.
Nice work on the Mondeo St mate, i am quite partial to em. the latest ST220 is lurrrvely! even look cool in estate form lol
Ben
X plate 2.216v SRi. standard bar the grill and irmscher rear clusters
got some nice scenic shots in layby just up road from my house, its so cool for pics.
Nice work on the Mondeo St mate, i am quite partial to em
. the latest ST220 is lurrrvely! even look cool in estate form lol Ben
Soldato
MarkLP said:I'll probably get slated for it being 'chavy' but I like it and its my car so there
Cracking job! cars look so much better colour coded!
