Sinister Twin.

Nice. Should look good. Also nice to see some progress on some projects - and I'm not pointing any sort of finger here, just that posted projects seem few and far between these days....and I'm totally in that boat now as most of my stuff is in crates trying to get ready to move.
 
Well summers on the way so it slows down then any way.

Case and fans arrived. Will start on that in a bit.

Edit. I had to order an internal usb hub too. I thought you could link lcd and non lcd fans but apparently not.

Edit. You can and can’t. IE you can link them to the same wireless controller but not physically together.

I also found out that mechanically LGA 1700 is the same as LGA 1851 so I’m going to use my EK 360 AIO. Which saves me £40.
 
Last edited:
Pics coming later.

I couldn’t fit the reverse fan in the middle of two LCD so it looks a bit odd. Never mind, OCUK had another 3 pack of reverse 120 LCD for £59. lol. So they are ordered.

I will then use one of the two spare fans as a floor intake and keep one as a spare.

Also ordered some thermal paste as I’m not sure what is where right now. Oh and some dust filters.

Pics coming later….
 








Last pic is what will come tomorrow, and hopefully be the last piece. The USB hub came today along with some VHB I ordered. I am going to use one of the reverse intakes there in the front at the bottom and keep the other as a spare.
 
OK so that stuff arrived yesterday and has been fitted. The screen was a bit of a sod to mount but will look amazing.

There are two more deliveries today. One is a fan hub as I took them all to mum’s when I did the Alienware and the other is a full custom cable set from cable mod. Inc the 12v GPU cable. They’re like a baby blue colour as it was all a bit black and dark.

Pics later when hopefully I’ll have more done :)
 
Good afternoon. I trust you are all having a lovely Sunday !

OK so here is where I am at. All of the fans are now in, as is the screen.



7 LCD now instead of 5.



The screen.



And I fitted two filters so far. One to the floor (it was the perfect size)


l]

And one to the front. Taking care each time to make sure you won't see the VHB once the panels go on.



Then around back for cable management. Note I have fitted a Thermalright USB internal hub, as well as a large fan come RGB hub.



Sadly as posted DPD failed to arrive. Particularly annoying as I had something else unrelated coming with and needed it. They are coming tomorrow apparently, and will be bringing these.








A full custom cable set. What's nice is they not only give you a 3 PSU connector to 12vh but also a straight 12vh. It needed something to break up all of the black. GPU is black, board is black, cooler etc.
 
Argh.

EK cooler did not fit. You can’t put an AIO and fans in the roof and with it in the side the hoses were only long enough to go towards the RAM and are too big. So you can’t fit the RAM.

Many hours later I fitted the 240 and it fits and works fine.

I then go to fit the GPU and it hits said AIO and fans.

So I need a vertical mount. And I’m skint til Friday /facepalm.
 
Might have some vertical mounts you'd be welcome to. At least one of them was yours in the first place! Even have some spare ribbons....because I was being indecisive! :D Will email you some pics.
 
Ah well, you can't expect sympathy for having a 5090! ;) :p
If the frames are any good to you to just add a ribbon to, you're welcome to them. Also, check if you'd lose more than 1FPS by sticking a Gen4 ribbon in and saving some cash.
 
Last edited:
The blue looks lovely in there tbh.

I had to basically tidy it all into a pile and walk away for a few days. For the best IMO…

Tuesday I had my pals come and take away all of the spares from mums. I’ve nowhere to store it and it would have ended up in the bin. Besides I didn’t need 4 monitors lmao.

Any way now I have a cold. Hurrah. I was supposed to be doing more packing over there today but I don’t feel up to it so I’ll go over next week.

I’ve ordered this on B grade. It was £50.


So hopefully tomorrow I can get more done.
 
It arrived!

I think it will fit!

It’s friggin HOOJ.

Bit late in the day now so I’ll crack on over the weekend.
 
Back
Top Bottom