Associate
Hey guys as title, looking for a smaller case than my current Corsair 750d. Ideally the case needs to be pretty understated to sit beside a tv.
Small ATX case that can hold an evga 980ti water cooled
- Thread starter Bazzards
- Start date
Man of Honour
BITFENIX NOVA MIDI TOWER CASE - BLACK
https://www.overclockers.co.uk/bitfenix-nova-midi-tower-case-black-ca-222-bx.html
https://www.overclockers.co.uk/bitfenix-nova-midi-tower-case-black-ca-222-bx.html
Thanks Micky, forgot to mention case also needs to fit an nhd 14 cooler course cooler.
Thinking the corsair 4000d might fit the bill. Not sure if it will still be quite large though. Decisions decisions.
Man of Honour
Nice case but with your requirements not going to get much smaller unless you change your motherboard.
Wow so close to what Im looking for. Might just be a tad too small. My Hybrid card is 26.67 according to official specs.
Now will my power supply fit, thats 20 cm long.
Now will my power supply fit, thats 20 cm long.
Thanks guys, I have ordered the Raijintek Thetis. Fingers crossed it all fits.
Man of Honour
Nice case but its gonna be tight with the psu length clashing with the gpu.
Take a look at this thread.
https://smallformfactor.net/forum/threads/raijintek-thetis-another-small-atx-case.5556/page-6
What is your hardware? I used to own a thetis so can give some insight
Hi Guys
I intend on moving the graphics card up a slot, this should give clearance to the Power supply. This is an Asus Strix z370-h board, both slots are x16, so no speed issue.
So the followng will be installed
Asus Strix z370-h board
Nh-d14 Noctua cooler
EVGA Supernova 1000 G2
EVGA 980ti Hybrid.
I will plumb the rad from the graphics card into the top. Wish me luck.
I intend on moving the graphics card up a slot, this should give clearance to the Power supply. This is an Asus Strix z370-h board, both slots are x16, so no speed issue.
So the followng will be installed
Asus Strix z370-h board
Nh-d14 Noctua cooler
EVGA Supernova 1000 G2
EVGA 980ti Hybrid.
I will plumb the rad from the graphics card into the top. Wish me luck.
Sounds awesome, I can't wait to see it!
Also, get a slim 120mm fan on order to fit at the bottom of the case.
Will post some photos. Will need to rethink my current storage though, as I currently have 2 X 3.5 inch drives and 3 SSD's.
Thinking of getting rid of the 3.5 inch drives and getting a couple of M2's. Will see how it all goes together.
Will check out fans for the bottom.
Thinking of getting rid of the 3.5 inch drives and getting a couple of M2's. Will see how it all goes together.
Will check out fans for the bottom.
Cheers, Im just hoping the rad from the graphics card fits.
Although, if i cannot fit it to the top of the case, I may try the rear for the 120 mm rad.
Although, if i cannot fit it to the top of the case, I may try the rear for the 120 mm rad.
Hey so this is the comparison between my current large case and new smaller case.
These are all the components to be cleaned and transferred.
These are all the components to be cleaned and transferred.
Well I got most of the kit into the new case. Was a squeeze.
I had to install the fan for the AIO pump on the outside of the case.
Will get rid of the hybrid card when I can.
I had to install the fan for the AIO pump on the outside of the case.
Will get rid of the hybrid card when I can.
Random thought, but if you wanted to free up some space to move the GPU down and maybe top mount the radiator, now is a good time to change PSUs. 1000W units are sold out everywhere due to demand from 3090 owners and miners. You'd get a very good price for yours right now.
Thanks McPhee, definately a good thought. Will check out prices for new 650 watt. I bought this power supply because i was running two 980ti hybrids, plus 5 hard drives. Probably overkill.