hello
i just today moved my pc into a new case because it was over heating in the old one so all went without a hitch. i booted it up and everything was fine the temps were 10-12 degrees below what they were so i decided to do a little(first time) oc'ing so i read the beginers guide in the oc'ing part of the forum and i followed it by upping the fsb from 200-205 and my cpu speed went from 3,4ghz to 3,48 i ran it in sp2004 for half an hour and the temps were well below what they were in the old case so i decided to crank it up to 206(i dont like strange looking numbers and 3.5ghz lookes nicer than 3.48 but thats another story)
so all was well until i shut down my pc for a few hours and then just now when i turned it on it still shows 3.5ghz 206x17 in the screen where you go into the bios but when i got into the pc i ran cpuz to look about and i found something strange the multiplier had changed to 14 and the clock speed was at something like 2.866ghz so i rebooted and changed it back from 206-200 and when i loaded up it showed 3.4ghz 200x17 on the bios entry screen,but when i got into cpuz it still showed the multiplier at 14 so my clock speed as you see is 2800mhz instead of 3400mhz
1st pic from before i changed it back 2nd pic from after i changed it back
please tell me there is something easy wrong with it
i just today moved my pc into a new case because it was over heating in the old one so all went without a hitch. i booted it up and everything was fine the temps were 10-12 degrees below what they were so i decided to do a little(first time) oc'ing so i read the beginers guide in the oc'ing part of the forum and i followed it by upping the fsb from 200-205 and my cpu speed went from 3,4ghz to 3,48 i ran it in sp2004 for half an hour and the temps were well below what they were in the old case so i decided to crank it up to 206(i dont like strange looking numbers and 3.5ghz lookes nicer than 3.48 but thats another story)
so all was well until i shut down my pc for a few hours and then just now when i turned it on it still shows 3.5ghz 206x17 in the screen where you go into the bios but when i got into the pc i ran cpuz to look about and i found something strange the multiplier had changed to 14 and the clock speed was at something like 2.866ghz so i rebooted and changed it back from 206-200 and when i loaded up it showed 3.4ghz 200x17 on the bios entry screen,but when i got into cpuz it still showed the multiplier at 14 so my clock speed as you see is 2800mhz instead of 3400mhz
1st pic from before i changed it back 2nd pic from after i changed it back
please tell me there is something easy wrong with it
