Smirnoff's Phase Logs

Smirnoff

Smirnoff

Smirnoff

Permabanned
Joined
18 Oct 2002
Posts
923
A couple of weeks ago I ordered a custom single stage phase unit and I've fininaly got chance to have a play with it today :)

I'm going to use my P5E VM HDMI and a E8600, It took about an hour to insulate the board and get it ready.

3455767878_812ea6a4a1_b.jpg


3455768628_be8cfd784e_b.jpg


3455770136_1cf7997b45_b.jpg



3455771538_0c7979c97e_b.jpg



Results :)

3455830430_ecb276f78b_b.jpg


As far as temperatures go the unit has been tuned to hold 400w of heat load @ -40c, Core temp and real temp will not work at - temperatures the only way I can seem to get any temperature readings is using the motherboards temperature sensor but it will not read below -20c :D
 
WOOHOO! About flippin time dude!

subscribed

[although i'm sure we will hear all about it at work!!!]

*edit - death to the crucial Ballistix!!! :mad:
 
what on earth are you using to insulate the board? looks mad!

i remember when I did it the novelty wore off quite quickly and the noise was unbearable! :D
 
matt100 said:
what on earth are you using to insulate the board? looks mad!
Click to expand...

Its called artists soft kneaded putty eraser, heres a picture of the board striped back down.

3455788769_9c17974ec2_b.jpg


3455785817_345d8d7e9e_b.jpg



I've had it on for over 3 hours and there is no sign of any moisture around the CPU socket, its much better than when I had to varnish motherboards when I used my old Mach 2 unit.

Sadly I cannot get anything over 500 FSB with my board as none of the other memory multipliers work and I havent any DDR2 that will run over 1200 MHz :(
 
You must log in or register to reply here.
Back
Top Bottom