• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

socket 478 pentium 4 heat output issue

Gavin

Gavin

Gavin

Soldato
Joined
20 Oct 2002
Posts
3,348
Location
Bromley
My gf uses a packard bell pc(i know!) which has served her well for what she wants but unfortunately the cpu has gone up the spout. I bought a pentium 4 2.8 celeron D from fleabay to tide her over but it runs to hot for my likeing. There was a 2.8 HT cpu in there i think.

Soooooooo

Obviously im looking to get a second cpu now that doesnt give out loads of heat.

So should i be getting a 2.8 ghz 533mhz prescott or a 2.8 ghz 800mhz or a 2.8 ghz 800 mhz HT enabled.

Basically out of the 478 cpus which one should i be looking for?

Or is there any others ive missed out........... I dont mind going down to a 2.6 or a 2.4 if its really going to help.

I might just be getting paranoid as its run for years with the generic h/s/f as is, and obviously i dont want to spend loads of money on it...

Cheers Guys
 
thanks guys..it had a 2.8 800fsb HT one in originally so i guess a 2.6 one would be ideal...Were they made???
 
ill probably have to pick one up from the second hand high street store so what do i need just the part numbers? which would be..........??
 
Well the pc is still merrily chugging away

Im using a 2.8 533 i got cheap off the forums. I dont have any temp monitoring software installed though as i dont want to start getting worried :D

I have how ever just secured a 3ghz HT Northwood.Cost £15 so i havnt really lost a lot in a cheap upgrade.(it would be good if i could find a way to use this so i could encode a few vids overnight when i do stay there)

My main worry now is the heat, can anyone recommend any decent coolers that are still available and dont take up a load of space on the motherboard as its quite cramped around the cpu area, if the fitting lifts the h/s/f above the caps on the board then that would be fine, but in my wisdom i failed to remember that in most cases the h/s/f is gonna cost me more than the cpu so it might of just been a red herring!"

Cheers
 
So can anyone recommend a h/s/f?

i was looking at these on fleabay
1. 170137102831
2. 160143132282

Or the Akasa AK-687 or the 675?
 
You must log in or register to reply here.
Back
Top Bottom