Socket 754 E6 3000+ Venice overclock

JRS

JRS

JRS

Soldato
Joined
6 Jun 2004
Posts
19,741
Location
Burton-on-Trent
Got hold of one of these a few days back, and I'm quite liking the results so far:



Memory is on the 133 divider, so is underclocked slightly at a little under 193mhz. Not that much of a problem to be honest as at 2.7ghz this chip just eats up any task I throw at it. Seems to me that these chips make a pretty decent upgrade to a 754 setup while we wait for M2.
 
Last edited:
Very nice!

ID guess his super pi to be 32 secs, thats what mine is.

How much was the chip? and what mobo is it?
im thinking of what to put in my mates pc
 
Mul - will do a Pi run in a bit, got it running another little task at the mo'

Defcon5 - chip cost me £80 from a good friend of mine. I've seen them on other sites at around £90. Board is a MSI K8N Neo running the version 2.1 bios.
 
defcon: if it is a new build you may as well build you mate a 939 based rig. if he is on 754 that is an awesome cpu to go for.

cool looking forward to see whether 754 chip at 2.7Ghz is much different to a 939 chip at 2.7Ghz

Mul
 
JRS said:
Mul - will do a Pi run in a bit, got it running another little task at the mo'

Defcon5 - chip cost me £80 from a good friend of mine. I've seen them on other sites at around £90. Board is a MSI K8N Neo running the version 2.1 bios.
Click to expand...

What volts?

Edit: sorry looked at the pic again doh nice job btw.
 
Last edited:
Defcon5 said:
Whats your latencies JRS?
Click to expand...

Crap memory unfortunately. Running it at 2.5-3-3-8-1T right now.

Hmm. Anyone think it'll manage 300*10?


****edit****

300*10 is a bridge too far at this voltage apparently, so going to try some more volts in a little while. Also, ran SuperPi 1mb calc and it took 36secs. That sound right?
 
Last edited:
considering the ram 36 seconds is about right yes. :)
My opteron 144 @ 2.7Ghz gets ~32s but the ram is running 2-2-2-5

Mul
 
Cool. Just asked a mate if I could borrow his TCCD for a play. His reply would get me PermaBanned if I posted it :eek:
 
Defcon5 said:
How high you gonna go with the voltage? Is it air cooled?
Click to expand...

Water cooled - Maze4 waterblock, Thermochill 120.1 rad, Eheim 1048 pump. As for how high I'll take the voltage....until I bottle it I guess :)
 
1.4V or thereabouts.

300*10 POSTs, but doesn't make it to Windows on the voltage in the screenie in my original post. I may try 1.7v for a quick suicide run. Don't really fancy leaving it at that kind of voltage for very long.


***edit***

I'm going in for the 300*10 attempt at 1.7V now. Wish me luck.

***edit2***

Nope. It won't have it at any price. Took the volts up to 1.71 and no boot. It always POSTs, but getting into Windows is a bridge too far I think. Dropped the voltage to a Speedfan-reported 1.60 and it still boots fine at 300*9 so I might leave it there TBH. I think I can live with a 700mhz overclock! :D

Now, if I get some decent RAM that does CL2 and 1T at around 220mhz without breaking the bank then I'll be really happy.
 
Last edited:
The socket 754 3000+ has a 10 multi?

Why are they clocked higher? to make uo for lack of the dual channel memory?
 
because if you look the 2800+ is the 1.8ghz, and the 3000+ is the 2.0 ghz, has been like this since before 939, you should be asking why isnt me 3000+ 939 2.0ghz ;)
 
Defcon5 said:
The socket 754 3000+ has a 10 multi?

Why are they clocked higher? to make uo for lack of the dual channel memory?
Click to expand...

Yep.

Still trying to get 300*10 working here....running it at 310*9 right now though. Think I'll survive if I don't get 3ghz :D
 
robmac said:
you wont get 3gig out of it on water.
best i can get out of my 3700 754 is 2.92 gig stable in a vapo xe.
Click to expand...

I certainly won't get it to run long...all I'm after is a suicide run :D

Besides which, what revision is that 3700? CG Clawhammer?
 
You must log in or register to reply here.
Back
Top Bottom