Stock temps ok?

Soullkilla

Soullkilla

Soullkilla

Associate
Joined
22 May 2009
Posts
139
Location
Guernsey, Channel Islands
just checking these temps out, running prime 95 atm, in my antec 1200 case with all fans on max, on a i7 920, with stock cooler.

after 10mins

core 0 - 76 oC
core 1 - 73 oC
core 2 - 74 oC
core 3 - 73 oC

CPU running at stock 2.66.
 
Sorry mate, going blind obviously :). Yes those temps look fine for full load on the stock cooler, if it was me I would replace it though.

Hawker
 
No, that's way too high! I would recommend reseating the heatsink using arctic silver 5 (clean the thermal grease off of the heatsink base and processor first) and try again. If it is still that high, I would try to RMA it, those temps should not be that high especially on stock! The max safe temp for the D0 is 67.9c, I would think twice before continuing to use that machine at those temps. Hope it goes well!
 
Thats does seem high in that case mate, fit the new cooler which should be on par if not better then the true, set all fans on the antec to med and see what temps you get im at 72c after an hour of prime to compare. :)
 
You must log in or register to reply here.
Back
Top Bottom