Stop start problem

hawkmoon1704 · 22 Apr 2009 at 20:37

My new build pc starts then stops then starts etc..

When I remove the ATX 12v 2x4 plug from the board the PC starts ok and runs but nothing happens on screen and it seem to be on full blast with fans not slowing down to normal speed.

Any suggestions?

ARRGH who'd build thier own PC!!!!

hawkmoon1704 · 22 Apr 2009 at 21:06

Ive put together a new mobo (gigabyte ep43c ds3), psu (ocz 500w) and case, with my old cpu (intel d 2.8) ram (geil ddr2 black dragon 2gb) and gfx card (ati 9500).

When I switch on the fans startup for 3 secs or so and turn off then turn on again for same and so on. do you think its my older cpu not working with the mobo?

Thanks.

hawkmoon1704 · 22 Apr 2009 at 21:40

Ive just tried my old psu 320w and the same thing happens ....Arrgh!

Hellllllp!

hawkmoon1704 · 23 Apr 2009 at 18:02

Looks like this aint so unique a problem.... gona try a build on cardboard n c if its just earthing on the case

hawkmoon1704 · 23 Apr 2009 at 18:43

Ive just read that my mobo don't support my current cpu!!!!!!!

Arrrgh I did read elsewhere that it was supported but I would say after trying all that carryon that it just is NOT supported. Damn..I should have check up on more than one site.
At least I'm pretty sure wots going on. I feel such a **** now lol!

Just like to say a big thaks to all the people on here who took the trouble to assisst, it makes all the difference when you feel so stuck. So cheers lads.