• Notice regarding image hosts and attachments. See here.

Strange boot issues

Soldato
Joined
16 Aug 2009
Posts
8,578
Location
Luton, England
Firstoff, specs:

i7 920 D0 @ 3.8
OCZ gold 6gig 1333MHz RAM
Gigabyte ex58-UD3R board
OCZ 780W PSU (Old)
8800GTX
Vista

Problem:
Whenever I booted up my PC, it wouldn't boot first attempt, it always shut off on the windows screen, to work fine the second time, also a few random blue screns here and there.

First I thought my OC wasn't stable, runs prime 95 fine for a few hours, but thought none-the-less I'll go up my vcore and QPI (I think that was what it's called) 1 notch each to see if that would help anything, so I went to my BIOS and upped my voltages, PC wouldn't boot, it got stuck in a loop where my fans would turn on, then off, then on, then off. Had to take out my CMOS to reset everything to get into the BIOS again.

I'm really confused, my Voltages weren't that high to start with (Set at AUTO) but when I upped them 1 notch each, it caused my PC to not boot at all. Also when I was following guides on here to try and get to 4GHz, I couldn't do anything, as soon as I upped voltages, PC wouldn't boot, got stuck in it's stupid loop again. Any suggestions?#

EDIT: Forgot to add, whenever I turn my PC power completely off and then back on, it always turns all the fans on for a second, turns them off, then boots normally. Not sure why this happens either.
 
Last edited:
Yeah, the loop issue happens if I up the voltages with the blck at stock.

Tested it before.
 
the fans turning on, then off, then finally booting is a normal thing. don't worry about that.

can't help you with your problem though sorry. i'm sure someone here can :)

Yeah the thing is when I up the voltages in the BIOS the PC will loop at the fans shutting on and off and it doesn't matter how long I leave it, it gets stuck in it's stupid cycle.
 
Back
Top Bottom