Stuck at 2.8GHz?

[Energize]

It seems that my E2200 won't go above 2.8GHz.

I'm at the stock voltage of 1.325v and fsb is 1018MT/254.5MHz, and I'm using a divider of 7:11 to keep the ram at 800MT/s. Max temp is 48 degrees, prime 95 stable. But as soon as I increase the fsb to 1054MT/s the computer jams when loading windows or logging on, even if I put the voltage upto 1.5v! Surely the E2200 can do better than this? My motherboard is an Asus P5N-E.

 

[Mul]

Some E2000's have had low FSB Walls but walls at less than 266 is just a tad unbelievable! Might be worth seeing how high FSB goes on a lower multi. I'd also try linking your memory and letting it run 1:1 for the moment. Is that 4GB in a 2x2GB config or 4x1GB?

 

[Energize]

Ah nevermind, was the 15k hard drives overheating causing windows to crash. At 3GHz now and counting.