Soldato
- Joined
- 8 Sep 2003
- Posts
- 23,173
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Aerocool X-Predator Ultimate Gaming Case - Black/Orange @ £99.98 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Was £109.99 Inc. VAT
Only £99.98 inc VAT.
ORDER NOW
Aerocool VS-3 Midi Tower Case - Black @ £29.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1 x 120mm (rear, 23 dB(A), 1,200RPM)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1 x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2 x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 2.0 / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Was £34.99 Inc. VAT
Only £29.99 inc VAT.
ORDER NOW
Antec P183 V3 Super Midi Tower Case - Gun Metal Black @ £89.99 inc VAT
The Antec P183 epitomizes cooling, quiet and sophistication. An Antec-exclusive three-layer side and front panel design (aluminum, plastic, aluminum) reduces noise and ensures Quiet Computing™. The P183 also boasts a dual chamber design that isolates the power supply from the rest of the components, minimizing heat and reducing system noise. Additional features include two internal 2.5" SSD bays, an external control for fans, cable management and a special gunmetal gray finish for one-of-a-kind style.
- Dual chamber design isolates heat and noise
- Power supply option: Comes with a power supply mounting adapter to mount either a standard size power supply or Antec's exclusive CP series power supply
- 4 x external 5.25"; 1 x 3.5"
- 6 x internal 3.5" for HDD
- 2 x internal 2.5" for SSDs
- 1 rear 120 mm TriCool™ fan
- 1 top 120 mm TriCool™ fan
- 2 front (optional) 120 mm fan for HDD
- Cable organizers behind motherboard tray minimize cable clutter
- CPU cutout allows for easy installation of CPU coolers
- Three-layer, sound-deadening side panels and front door (aluminum, plastic, aluminum) dampens noise and ensures Quiet Computing
- Double-hinged door opens to 270°
- 7 expansion slots
- Built-in washable air filters inside front panel
- Front ports
- 2 x USB 2.0
- 1 x USB 3.0
- Audio In and Out (HDA and AC'97 compatible)
- 0.8 mm cold rolled steel for durability; 1.0mm cold rolled steel around 4 x HDD area
- Motherboard: Mini-ITX, microATX, Standard ATX
- Unit Dimension: 514 mm (H) x 205 mm (W) x 507 mm (D)
Was £104.99 Inc. VAT
Only £89.99 inc VAT.
ORDER NOW
Antec 1200 Twelve Hundred (V3 with USB3.0) Ultimate Gaming Case - Black @ £104.99 inc VAT
Antec's Twelve Hundred V3 gaming case combines maximum performance, cooling and compatibility in a full-tower package. Thirteen drive bays, space for graphics cards as large as 17.5", a CPU cutout, an internal 2.5" SSD drive mount and newly integrated USB 3.0 round off a robust foundation for your components. The Twelve Hundred V3 features a top Big Boy 200™ blue LED cooling fan, two rear blue LED 120 mm fans and three front blue LED 120 mm fans. Apart from standard size power supplies, the Twelve Hundred V3 can accommodate Antec's CPX form factor PSUs. Outfit your components and maximize their performance with Antec's Twelve Hundred V3.
- 13 drive bays
- External 3 x 5.25"; Internal 9 x 3.5" for HDD, or
- External 6 x 5.25"; Internal 6 x 3.5" for HDD, or
- External 9 x 5.25"; Internal 3 x 3.5" for HDD or
- External 12 x 5.25 for HDD
- Internal 1 x bottom-mounted 2.5" SSD drive
- CPU cutout allows for easy installation of CPU coolers
- Convenient top accessory tray
- Advanced cooling system:
- 2 rear 120 mm blue LED exhaust fan
- 1 top 200 mm Big Boy 200&tradel blue LED exhaust fan
- 3 front 120 mm blue LED intake fans with front speed control
- 1 window side panel 120 mm fan slot
- 1 middle 120 mm fan bracket
- 200 mm Radiator mount
- Built-in washable air filters
- Perforated front bezel for enhanced air intake
- 7 expansion slots to support multiple graphics cards, including NVIDIA 3-way SLI®
- Maximum video card size: 17.5" / 444 mm (Note: some video cards may require removal of the adjacent hard drive cage)
- Front mounted I/O ports
- 2 x USB 2.0
- 1 x USB 3.0
- Audio In and Out (AC'97 and HDA compatible)
- Motherboard mount: Mini-ITX, microATX, Standard ATX
- No power supply included
- Power supply mount: Standard size PSUs or Antec�s exclusive CPX form factor PSUs
Was £119.99 Inc. VAT
Only £104.99 inc VAT.
ORDER NOW
Antec 1100 Eleven Hundred Ultimate Gaming Tower Case - Black @ £89.99 inc VAT
The Antec Eleven hundred is the new beast in the Hundred Series range, with a price that beats the competition to the ground with features and technology that does truely astound.
- 0.8mm SECC Constuction
- Perforated, quick release front bezel
- Enlarged CPU cutout
- Windowed side panel and optional fan mounts
- Supports up to XL-ATX Motherboards
- 11 drive Bays
- Rubber grommetted cable routing holes
- Fits all Antec Kuhler H20 CPU Coolers
- Supports GPU's up to 330mm
- 9 Expansion Slots
- Front I/O Ports: Audio in/output / 2 x USB3.0 / 2 x USB2.0
- Tool-less 3.5" Drive bays x 6
- Easy install 2.5" Drive bays x 2
- Tool-less 5.25" Drive Bays x 3
- Top Cooling: 1 x 200mm Blue LED Fan
- Side Cooling: 1 x 120mm Fan (optional) - behind the motherboard to cool back of CPU
- Rear Cooling: 1 x 120mm Fan
- Front Cooling: 2 x 120mm Fans (optional)
- Internal Cooling: 2 x 120mm Fans (optional)
- Side Cooling: 2 x 120mm Fans (optional)
- 3 x Fan Filters
- 3 Year Warranty
Was £99.98 Inc. VAT
Only £89.99 inc VAT.
ORDER NOW
BitFenix Raider Tower Case - Black @ £63.98 inc VAT
Defeat system-crashing heat with Raider - the all-new performance chassis design from BitFenix. Unlike most other chassis that include run-of-the-mill fans, Raider comes equipped with three premium 120mm BitFenix Spectre™ Fans and a contoured mesh design for unstoppable cooling performance. The first chassis to offer four SuperSpeed USB 3.0 ports, Raider is ready for the future, offering all the connectivity you need for your SuperSpeed peripherals. The integrated fan controller controls up to five fans, allowing you to customize your system's cooling profile to suit the task at hand. DIY niceties like filtered intakes, tool-free drive locking mechanisms, rubber grommets and plenty of space behind the motherboard tray help you get up and running headache-free, and a removable hard drive cage wall means that Raider even accommodates expansion cards up to 38cm in length! To top it all off, Raider is coated in signature BitFenix SofTouch™ Surface Treatment for a quality matte finish and one-of-a-kind feel. Unstoppable performance and quality - that's BitFenix Raider.
- Four SuperSpeed USB 3.0 Port
As the first chassis to offer four SuperSpeed USB 3.0 ports, Raider is ready for the future. Use the two internal 19-pin connectors to enable up to four USB 3.0 ports, or use the included 9-pin connectors for USB 2.0 – plenty of connectivity for all your high-speed USB devices.
- Maximum Airflow Design
The smooth mesh styling of Raider is more than just looks. The combination of an all mesh front and top with 5 fan locations means maximum cooling for your components. And for those who demand even more airflow, Raider can also be outfitted with up to two huge 200mm fans for unmatched air cooling.
- BitFenix Spectre™ Cooling
A premium chassis deserves premium cooling. That's why Raider comes loaded with three BitFenix Spectre™ 120mm fans for superb cooling performance and quiet operation.
- Integrated Fan Controller
Power is nothing without control, which is why Raider comes equipped with an integrated fan controller. Watching a movie or listening to music? Turn your fans down for the sweet sound of silence. Ready to get into the game? Turn your fans up for maximum cooling performance. With Raider, you've got total control over any situation.
- Superb Expansion
Offering four 5.25" bays, six 3.5"bays, and space for up to seven 2.5" drives, Raider can accommodate a bevy of hardware. Have an extremely long graphics card? No problem. Simply remove the specially-designed hard drive cage wall and install graphics cards up to 38cm in length!
- BitFenix SofTouch™ Surface Treatment
Raider features signature BitFenix SofTouch™ Surface Treatment which gives an elegant matte finish and one-of-a-kind feel. Best of all, SofTouch™ even resists fingerprints and stains, keeping your Raider looking great.
- Trouble-Free Installation
Working with your system shouldn't be a headache. With a large CPU cooler cutout, tool-free drive locking mechanisms, rubber grommets and 23mm of clearance behind the motherboard tray, Raider can get your system up and running in record time. And to keep your system clean on the inside, dust filters on all intakes are also included.
- Dimensions: 210 x 500 x 493mm (ATX Mid Tower)
- Motherboard Sizes: Mini-ITX, mATX, ATX
- 5.25" Drive Bays: x 4
- 3.5" Drive Bays: x 6
- 2.5" Drive Bays: x 7
- Cooling Front: 2 x 120mm (included) or 1 x 200mm (optional)
- Cooling Rear: 1 x 120mm (included)
- Cooling Top: 1 x 200mm (optional)
- Cooling Bottom: 1 x 120mm (optional)
- PCI Slots: x 7
- I/O: 4 x USB3.0, HD Audio
- Power Supply: PS2 ATX (bottom, multi direction)
Was £71.99 Inc. VAT
Only £63.98 inc VAT.
ORDER NOW
Cooler Master Centurion RC534 Windowed Tower Case - Black @ £40.99 inc VAT
The three cornerstones of Cooler Master's business philosophy are innovation, speed, and customer satisfaction. It has been Cooler Master's steadfast commitment to these values and ability to fulfill its promise to honor them that accounts for its sustained record of growth and the many long-term customers it has accumulated. Together, innovation, speed, and customer satisfaction ensure that Cooler Master is the supplier that the companies around the world rely on to deliver the best solutions.
- Superior airflow
- Special mesh design provides the superior airflow and maximum cooling performance
- Tool-free design
- Easy assembly for quick maintenance and upgrade
- 120mm case fan
- 120mm fans in the front and rear to give your PC the best ventilation while maintain silent cooling solution
- I/O Ports: 2 x USB2.0 / 2 x Audio
- Expansion Slots: 7
- Front Cooling: 1 x 120mm Fan (included)
- Rear Cooling: 1 x 120mm Fan (optional)
- 5 x 5.25" Drive Bays
- 5 x 3.5" Drive Bays
Was £47.99 Inc. VAT
Only £40.99 inc VAT.
ORDER NOW
Cooler Master CM-690 II Lite Windowed Gaming Tower Case - Black @ £74.99 inc VAT
CCM 690 II Lite makes it possible to take advantage of excellent airflow and water cooling options to vastly reduce temperatures on system components. The CPU mounting hole size has also been enlarged to make installing CPU heatsink backplates even more convenient, and the rubber grommets have been redesigned for improved cable management. Additionally, the CM 690 II Advanced (USB 3.0 version) is equipped with two USB 3.0 internal connectors for faster data transfer. The spacious mid-tower will keep enthusiasts happy with room for up to 3 Dual Slot graphics cards, high-end CPU coolers, top or bottom mounted water cooling radiators and 1.8"/2.5" drive adapters for easy upgrades.
- Enlarged front and top mesh design for superb ventilation
- Can accommodate an internal 120 x 240 mm radiator at the top and bottom
- Dust-control filters for all meshed areas
- Supports for up to 10 fans (up to 5 x 140 mm fans)
- External SATA docking station (X-dock)
- Rear tubing holes for water cooling
- Includes 1.8" & 2.5" HDD and SSD adapters
- More and redesigned rubber grommets for improved cable management
- Larger CPU heatsink cut-out on the mainboard tray
- Dimension (W / H / D): 214.5 x 496 x 528.8 mm
- 5.25" Drive Bays: 4 (without the use of exposed 3.5" drive bay)
- 3.5" Drive Bays: 6 hidden (4 removable), 1 exposed (converted from one 5.25" drive bay)
- I/O Panel: USB 2.0 x 2, Mic x 1, Audio x 1 (supports HD/AC97 audio)
- Front Cooling: 140 x 25mm blue LED fan x 1 / 1200RPM / 19dBA
- Rear Cooling: 120mm fan x 1 / 1200 RPM / 17dBA
- Top Cooling: Top: 120mm fan x 1/ 1200RPM /17dBA (supports 120/140mm fan x 2)
- Bottom Cooling: 120mm fan x 2 (optional)
- Left side Cooling: 120/140mm fan x 2 (optional)
- Right side Cooling: 80 x 15mm x 1 (optional)
- HDD cage Cooling: 120mm fan x 1 (optional)
- 2.5"/3.5"- SATA HDD Drive Bay: 2 (converted from one 3.5” drive bay)
- Maximum Compatibility: VGA card length:304mm / 11.96 inch
- CPU cooler height:177mm / 6.96 inch
Was £89.99 Inc. VAT
Only £74.99 inc VAT.
ORDER NOW
Cooler Master HAF X Gaming Tower Case - Black (RC-942) @ £130.00 inc VAT
The much anticipated HAF X arrives as the flagship of the popular HAF (High Air Flow) series. Designed for performance systems, this chassis is able to house today's latest and hottest CPUs, motherboards, GFX cards and is even USB3.0 compatible. With specialised support and cooling for graphic cards, massive airflow with the help of up to four gigantic fans and easy access to installed components, this is as close as it gets to a system builder's 'dream case'.
- Dimensions: 230 x 550 x 590mm ( W x H x D)
- Motherboard Compability: Micro- ATX, ATX and E-ATX
- 6 x 5.25" Drive Bays
- 5 x 3.5" Drive Bays
- I/O Panel: USB3.0 x 2, USB2.0, Audio x 2, e-SATA x 1, FireWire x1
- Cooling (Front): 230 x 30 mm red LED fan x1
- Cooling (Top): 200 x 30mm fans x 2 (1 included)
- Cooling (Side): 200 x 30mm fan x 1
- Cooling (Rear): 140 x 25mm fan x 1
- VGA Fan Duct: 120 x 25mm fan x 1 (not included)
- VGA Holder: 80 x 15mm fan x 1 (not included)
- PCI Slots: 9
- Base Mounted PSU Bracket
Was £139.99 Inc. VAT
Only £130.00 inc VAT.
ORDER NOW
Cooler Master Elite 372 Midi Tower Case - Black @ £31.99 inc VAT
Elite 372 is built for general desktop users and delivers high-end features that create opportunities for several upgrade paths while keeping the Elite 372 in an affordable market segment. Encased in a stylish shell, Elite 372 also offers efficient cooling via an ideal filter and ventilation layout. The roomy interior can contain long graphics cards such as AMD Radeon HD 5970. Additionally, Elite 372 comes with the front I/O panel, and tool-free design for quick assembly and easy maintenance.
- Outstanding cooling performance by vents at top, bottom, and side panel
- Tool-Free mechanical design for quick assembly and easy maintenance.
- Front I/O panel for easy access
- Compatible with Micro-ATX and ATX
- 7 expansion slots for flexibility of graphics card solutions
- Supports long graphics cards including AMD Radeon HD 5970
- Dimension (W / H / D): 192.5 x 427 x 498.3mm
- M/B Type: Micro-ATX, ATX
- 5.25" Drive Bay: 3 (exposed)
- 3.5" Drive Bay: 1 (exposed), 5 (hidden)
- I/O Panel: USB 2.0 x 2, Mic x 1, Audio x 1
- Expansion Slots: 7
- Top Cooling: 120mm fan x 2 (optional)
- Front Cooling: 120/140mm fan x 1 (optional)
- Rear Cooling: 120mm fan x 1, 80/90mm (optional)
- Side Cooling: 120/140mm fan x 2 (optional)
- Bottom Cooling: 80/90/120mm fan x 1 (optional)
- Power Supply: Standard ATX PS2 (optional)
- Maximum Compatibility: VGA card length: 315mm
- CPU cooler height: 163mm
Was £35.99 Inc. VAT
Only £31.99 inc VAT.
ORDER NOW
Cooler Master Sileo 500 Silent Case - Black @ £49.99 inc VAT
The cooler master's new soundproof definition to chassis. The Sileo 500 has installed sound proofing sound reduction material in 4 direction top, bottom, two sides of the chassis, anti-vibration pads in detachable HDD trays to absorb vibration and reduce noise, plus a comfort rare noise reduction pads for power supply. Besides Sileo 500 also has the tool-free technology for quick maintenance and upgrade. Sileo 500 create an absolute quiet environment, suitable for working office and study room.
- Sound-proof design for a quiet computing experience
- Subtle ventilation holes located between side and front panels
- Easy access front I/O panel with support for e-SATA, USB and Audio
- 5x 5.25" and 5x 3.5" tool-free design for easy installation and upgrade
- Aluminum bezel with Elegant design
- Detachable anti-vibration HDD pads for noise reduction
- Stylish front LED
Was £56.99 Inc. VAT
Only £49.99 inc VAT.
ORDER NOW
NZXT Phantom Enthusiast USB3.0 Full Tower Case - Orange/Black @ £94.99 inc VAT
NZXT presents the cutting edge Phantom Full Tower Chassis. Designed with sleek, pristine contours, the Phantom radiates personality and quality. As with all NZXT products, we strive to set apart our customers from the rest with unique, original designs – we run the extra mile so you won’t have to settle with the typical rectangular box. The Phantom delivers high performance cooling advantages with 7 fan cooling options, dual radiator support, quad watercooling cutouts, and five 20W per channel fan controls. An innovative 5.25” screwless system, vast space to encompass 7 hard drives, and five 5.25” bays enable smooth customization. Establish your power, your presence.
- High Performance Cooling Advantages
– Phantom’s extensive cooling capabilities include 7 fan cooling options with dual 200mm, single 230/200mm, triple 120mm, and front 140mm fan options.
- NZXT includes dual radiator support, quad watercooling cutouts, and an integrated fan controller with up to five 20W channels.
- Simple Installation
– Phantom celebrates an array of innovative features designed to enhance every stage of the build
- Meticulous cable management is easily attainable with large spacing behind the motherboard.
- Innovative all-new 5.25” screwless rails make installing and swapping HDDs an effortless process
- Rubber grommets dampens vibration during operation.
- LED on/off button to control fan lighting
- Rubber PSU and case feet to reduce vibration
- Easily removable front and top panels
- Top mounted USB, Audio/Mic, and E-SATA ports.
– Features support for larger heat sinks, graphics cards, and E-ATX motherboards enabling enthusiasts to include any of today’s hottest components
- Vast space within the enclosure allows for 7 hard drives with SDD support and up to five 5.25” bays
Was £109.99 Inc. VAT
Only £94.99 inc VAT.
ORDER NOW
NZXT Switch 810 Big Tower Case - Black @ £134.99 inc VAT
Experience the pinnacle of chassis design! Switch 810 is an epic hybrid case built for the hardcore PC enthusiast. This full tower chassis introduces a first of its kind concept for more versatility and adaptability to any configuration. It can be modified for superior water cooling or superb airflow through seamless operation. The Switch 810 is the ultimate powerhouse suitable for any type of PC enthusiast – whether you are liquid cooling, silent performance, or extreme airflow. You will have full control to customize all the features of Switch 810 based upon your preference.
Some unique features that set Switch 810 apart is the adjustable Hybrid Fins that reduce sound up to 40-60% when closed or open passageways for maximum airflow. Keep dust out by simply shifting the Hybrid Fins closed. Switch 810 has a rear LED light for illuminating the I/O in the dark, removable HDD cages for bottom radiator installation, a stealth bay, ability to mount triple 120/140mm radiators with 90mm of space, and potential to install up to 7 HDDs. For the first time, NZXT is introducing advanced HDD cages equipped with two 140mm pivot fans for directing airflow to the VGA and CPU. Anything is achievable with this chassis. You can only explore the infinite possibilities of PC expansion with the Switch 810.
- Unique hybrid full tower chassis optimized for extreme liquid cooling, airflow, or silence
- Supports high-end water cooling solutions up to three fans for push and pull configuration: 90mm of internal top space with top 360/420mm and bottom 140/240mm radiator support for unmatched liquid cooling
- Four watercooling cutouts for easy liquid cooling management on the rear panel
- Spacious CPU cutout for mounting high-end CPU coolers without removing the motherboard
- Removable top 5.25” plates to accommodate wide radiators
- Clever hybrid fin design allows the user to choose between maximum airflow or sound reduction
- Innovative right-mounted HDDs for easy hard drive replacement
- Removable HDD pull-out cages and large storage capacity for 7 hard drives
- Equipped with two 140mm pivot fan slots for directing airflow at 15^(0) to the VGA and CPU
- Rear white light for visibility in dark environments with a toggle switch
- Dual high-speed USB 3.0, hard drive dock along with a SD card reader for transfer and quick access to multimedia
- 5.25" hard drive hot swap with SATA III support
- Nine expansion slots for installing EATX motherboards with Quad SLI or Triple Crossfire
- Supreme cooling capacity with up to ten 140/120mm fans
- Stress-free wire management and 23mm clearance in the rear allows for superb wire-tucks
- Ten large specialized cutout holes for easy cable management
- Easily removable bottom filters in the front and rear to prevent dust from entering
- Tool-less 5.25” and 3.5”/2.5” SSD hard drive installation for convenience and ease of accessibility
- Large acrylic window with a view to show off the interior of your rig
- Dimenions: (W x H x D) 235 x 595 X 585 mm
- VGA Clearance Maximum: 375mm (w/out fan), 350 (installed), 285 (full pivot)
- Front Cooling: 2 X 120/140mm (1x 140mm included)
- Rear Cooling: 1 X 120/140mm (1x 140mm included)
- Top Cooling: 3 X 120/140mm (1x 140mm included)
- Bottom Cooling: 2x 120/140mm
- Interior Cooling: 2x 120/140mm (1x 140mm included)
- Large acrylic window
- Drive Bays: 4 External 5.25" Bays / 6 Internal 3.5" Bays
- Screwless Rail Design
- Expansion Slots: 9
- Motherboard Support: E-ATX, XL-ATX, ATX, MICRO-ATX, Mini-ITX
Was £149.99 Inc. VAT
Only £134.99 inc VAT.
ORDER NOW
Xigmatek Pantheon Mid Tower Case - Black @ £35.99 inc VAT
Pantheon – Rome’s temple of gods. Big and impressive by a great architecture and dedicated engineering for all your hardware, Xigmatek proudly presents our latest exclusive chassis – the Pantheon. Decent design combined with features such as our tool free design for the 5.25” bays, 6 hot swap hdd cages including anti vibration, black interior and exterior, usb 3.0, 2 fan controllers, last but not least also the radiator support of 240/280mm radiator on the top. Get yourself a piece of ancient experience and flair and start the combat with Pantheon!
Two 2.5”/3.5” front-opened hot-swappable HDD trays; USB3.0 super-speed port and two fan speed control knobs on the top panel; Both side screw-less ODD holders with anti-vibration rubbers; Thumb screws for add-on card easy installation; 1 Year Warranty
- Dimension: 206(W) x 543(H) x 500(D) mm (8.1*21.4*19.7 inches);
- Drive Bay: External x 4 with both side tool-free holders with anti-vibration rubbers;
- Expansion Slot: 7 slots, 330mm free length for long card.(Thumb screws);
- Motherboard Support: ATX, Micro ATX (with cooler blackplate easy installation window);
- Power Supply: Standard P/S2 ATX/EPS power supply unit; 1. Intake airflow hole with dust filter; 2. - Available for face upward and downward installation; 3. Within anti-vibration rubber;
- Cooling System: Air-cooling; Front Fan: Pre-installed 120mm white LED with black blades x 2 on HDD cage and LED is on/off switchable.(Max. four 120mm fans on HDD cage both side.); Rear Fan: Pre-installed 140mm white LED with black blades x 1 and LED is on/off switchable.(120mm fan is available); Side Fan: Pantheon-Original: Optional 120/140mm fan x 2 Bottom Fan: Optional 120/140mm fan x 1 (with dust filter); Top Fan: Optional 120/140mm fan x 2 or 170mm fan*1; Fan Speed Control: Six fan speeds are adjustable synchronously by two knobs on top panel; Water-cooling; Water pipe holes x 4 (with rubber cover) Available for 240/280mm radiator on the top; Radiator size limitation inside of top panel : (L)290*(W)130*(H)42mm;
- I/O Panel Top Panel: Power switch, Reset switch, USB3.0*1, USB2.0 x 2, e-SATA x 1, Audio in/out x 1 (HD Audio), two knobs of fan controller;
Was £44.99 Inc. VAT
Only £35.99 inc VAT.
ORDER NOW
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Was £109.99 Inc. VAT
Only £99.98 inc VAT.
ORDER NOW
Aerocool VS-3 Midi Tower Case - Black @ £29.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1 x 120mm (rear, 23 dB(A), 1,200RPM)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1 x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2 x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 2.0 / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Was £34.99 Inc. VAT
Only £29.99 inc VAT.
ORDER NOW
Antec P183 V3 Super Midi Tower Case - Gun Metal Black @ £89.99 inc VAT
The Antec P183 epitomizes cooling, quiet and sophistication. An Antec-exclusive three-layer side and front panel design (aluminum, plastic, aluminum) reduces noise and ensures Quiet Computing™. The P183 also boasts a dual chamber design that isolates the power supply from the rest of the components, minimizing heat and reducing system noise. Additional features include two internal 2.5" SSD bays, an external control for fans, cable management and a special gunmetal gray finish for one-of-a-kind style.
- Dual chamber design isolates heat and noise
- Power supply option: Comes with a power supply mounting adapter to mount either a standard size power supply or Antec's exclusive CP series power supply
- 4 x external 5.25"; 1 x 3.5"
- 6 x internal 3.5" for HDD
- 2 x internal 2.5" for SSDs
- 1 rear 120 mm TriCool™ fan
- 1 top 120 mm TriCool™ fan
- 2 front (optional) 120 mm fan for HDD
- Cable organizers behind motherboard tray minimize cable clutter
- CPU cutout allows for easy installation of CPU coolers
- Three-layer, sound-deadening side panels and front door (aluminum, plastic, aluminum) dampens noise and ensures Quiet Computing
- Double-hinged door opens to 270°
- 7 expansion slots
- Built-in washable air filters inside front panel
- Front ports
- 2 x USB 2.0
- 1 x USB 3.0
- Audio In and Out (HDA and AC'97 compatible)
- 0.8 mm cold rolled steel for durability; 1.0mm cold rolled steel around 4 x HDD area
- Motherboard: Mini-ITX, microATX, Standard ATX
- Unit Dimension: 514 mm (H) x 205 mm (W) x 507 mm (D)
Was £104.99 Inc. VAT
Only £89.99 inc VAT.
ORDER NOW
Antec 1200 Twelve Hundred (V3 with USB3.0) Ultimate Gaming Case - Black @ £104.99 inc VAT
Antec's Twelve Hundred V3 gaming case combines maximum performance, cooling and compatibility in a full-tower package. Thirteen drive bays, space for graphics cards as large as 17.5", a CPU cutout, an internal 2.5" SSD drive mount and newly integrated USB 3.0 round off a robust foundation for your components. The Twelve Hundred V3 features a top Big Boy 200™ blue LED cooling fan, two rear blue LED 120 mm fans and three front blue LED 120 mm fans. Apart from standard size power supplies, the Twelve Hundred V3 can accommodate Antec's CPX form factor PSUs. Outfit your components and maximize their performance with Antec's Twelve Hundred V3.
- 13 drive bays
- External 3 x 5.25"; Internal 9 x 3.5" for HDD, or
- External 6 x 5.25"; Internal 6 x 3.5" for HDD, or
- External 9 x 5.25"; Internal 3 x 3.5" for HDD or
- External 12 x 5.25 for HDD
- Internal 1 x bottom-mounted 2.5" SSD drive
- CPU cutout allows for easy installation of CPU coolers
- Convenient top accessory tray
- Advanced cooling system:
- 2 rear 120 mm blue LED exhaust fan
- 1 top 200 mm Big Boy 200&tradel blue LED exhaust fan
- 3 front 120 mm blue LED intake fans with front speed control
- 1 window side panel 120 mm fan slot
- 1 middle 120 mm fan bracket
- 200 mm Radiator mount
- Built-in washable air filters
- Perforated front bezel for enhanced air intake
- 7 expansion slots to support multiple graphics cards, including NVIDIA 3-way SLI®
- Maximum video card size: 17.5" / 444 mm (Note: some video cards may require removal of the adjacent hard drive cage)
- Front mounted I/O ports
- 2 x USB 2.0
- 1 x USB 3.0
- Audio In and Out (AC'97 and HDA compatible)
- Motherboard mount: Mini-ITX, microATX, Standard ATX
- No power supply included
- Power supply mount: Standard size PSUs or Antec�s exclusive CPX form factor PSUs
Was £119.99 Inc. VAT
Only £104.99 inc VAT.
ORDER NOW
Antec 1100 Eleven Hundred Ultimate Gaming Tower Case - Black @ £89.99 inc VAT
The Antec Eleven hundred is the new beast in the Hundred Series range, with a price that beats the competition to the ground with features and technology that does truely astound.
- 0.8mm SECC Constuction
- Perforated, quick release front bezel
- Enlarged CPU cutout
- Windowed side panel and optional fan mounts
- Supports up to XL-ATX Motherboards
- 11 drive Bays
- Rubber grommetted cable routing holes
- Fits all Antec Kuhler H20 CPU Coolers
- Supports GPU's up to 330mm
- 9 Expansion Slots
- Front I/O Ports: Audio in/output / 2 x USB3.0 / 2 x USB2.0
- Tool-less 3.5" Drive bays x 6
- Easy install 2.5" Drive bays x 2
- Tool-less 5.25" Drive Bays x 3
- Top Cooling: 1 x 200mm Blue LED Fan
- Side Cooling: 1 x 120mm Fan (optional) - behind the motherboard to cool back of CPU
- Rear Cooling: 1 x 120mm Fan
- Front Cooling: 2 x 120mm Fans (optional)
- Internal Cooling: 2 x 120mm Fans (optional)
- Side Cooling: 2 x 120mm Fans (optional)
- 3 x Fan Filters
- 3 Year Warranty
Was £99.98 Inc. VAT
Only £89.99 inc VAT.
ORDER NOW
BitFenix Raider Tower Case - Black @ £63.98 inc VAT
Defeat system-crashing heat with Raider - the all-new performance chassis design from BitFenix. Unlike most other chassis that include run-of-the-mill fans, Raider comes equipped with three premium 120mm BitFenix Spectre™ Fans and a contoured mesh design for unstoppable cooling performance. The first chassis to offer four SuperSpeed USB 3.0 ports, Raider is ready for the future, offering all the connectivity you need for your SuperSpeed peripherals. The integrated fan controller controls up to five fans, allowing you to customize your system's cooling profile to suit the task at hand. DIY niceties like filtered intakes, tool-free drive locking mechanisms, rubber grommets and plenty of space behind the motherboard tray help you get up and running headache-free, and a removable hard drive cage wall means that Raider even accommodates expansion cards up to 38cm in length! To top it all off, Raider is coated in signature BitFenix SofTouch™ Surface Treatment for a quality matte finish and one-of-a-kind feel. Unstoppable performance and quality - that's BitFenix Raider.
- Four SuperSpeed USB 3.0 Port
As the first chassis to offer four SuperSpeed USB 3.0 ports, Raider is ready for the future. Use the two internal 19-pin connectors to enable up to four USB 3.0 ports, or use the included 9-pin connectors for USB 2.0 – plenty of connectivity for all your high-speed USB devices.
- Maximum Airflow Design
The smooth mesh styling of Raider is more than just looks. The combination of an all mesh front and top with 5 fan locations means maximum cooling for your components. And for those who demand even more airflow, Raider can also be outfitted with up to two huge 200mm fans for unmatched air cooling.
- BitFenix Spectre™ Cooling
A premium chassis deserves premium cooling. That's why Raider comes loaded with three BitFenix Spectre™ 120mm fans for superb cooling performance and quiet operation.
- Integrated Fan Controller
Power is nothing without control, which is why Raider comes equipped with an integrated fan controller. Watching a movie or listening to music? Turn your fans down for the sweet sound of silence. Ready to get into the game? Turn your fans up for maximum cooling performance. With Raider, you've got total control over any situation.
- Superb Expansion
Offering four 5.25" bays, six 3.5"bays, and space for up to seven 2.5" drives, Raider can accommodate a bevy of hardware. Have an extremely long graphics card? No problem. Simply remove the specially-designed hard drive cage wall and install graphics cards up to 38cm in length!
- BitFenix SofTouch™ Surface Treatment
Raider features signature BitFenix SofTouch™ Surface Treatment which gives an elegant matte finish and one-of-a-kind feel. Best of all, SofTouch™ even resists fingerprints and stains, keeping your Raider looking great.
- Trouble-Free Installation
Working with your system shouldn't be a headache. With a large CPU cooler cutout, tool-free drive locking mechanisms, rubber grommets and 23mm of clearance behind the motherboard tray, Raider can get your system up and running in record time. And to keep your system clean on the inside, dust filters on all intakes are also included.
- Dimensions: 210 x 500 x 493mm (ATX Mid Tower)
- Motherboard Sizes: Mini-ITX, mATX, ATX
- 5.25" Drive Bays: x 4
- 3.5" Drive Bays: x 6
- 2.5" Drive Bays: x 7
- Cooling Front: 2 x 120mm (included) or 1 x 200mm (optional)
- Cooling Rear: 1 x 120mm (included)
- Cooling Top: 1 x 200mm (optional)
- Cooling Bottom: 1 x 120mm (optional)
- PCI Slots: x 7
- I/O: 4 x USB3.0, HD Audio
- Power Supply: PS2 ATX (bottom, multi direction)
Was £71.99 Inc. VAT
Only £63.98 inc VAT.
ORDER NOW
Cooler Master Centurion RC534 Windowed Tower Case - Black @ £40.99 inc VAT
The three cornerstones of Cooler Master's business philosophy are innovation, speed, and customer satisfaction. It has been Cooler Master's steadfast commitment to these values and ability to fulfill its promise to honor them that accounts for its sustained record of growth and the many long-term customers it has accumulated. Together, innovation, speed, and customer satisfaction ensure that Cooler Master is the supplier that the companies around the world rely on to deliver the best solutions.
- Superior airflow
- Special mesh design provides the superior airflow and maximum cooling performance
- Tool-free design
- Easy assembly for quick maintenance and upgrade
- 120mm case fan
- 120mm fans in the front and rear to give your PC the best ventilation while maintain silent cooling solution
- I/O Ports: 2 x USB2.0 / 2 x Audio
- Expansion Slots: 7
- Front Cooling: 1 x 120mm Fan (included)
- Rear Cooling: 1 x 120mm Fan (optional)
- 5 x 5.25" Drive Bays
- 5 x 3.5" Drive Bays
Was £47.99 Inc. VAT
Only £40.99 inc VAT.
ORDER NOW
Cooler Master CM-690 II Lite Windowed Gaming Tower Case - Black @ £74.99 inc VAT
CCM 690 II Lite makes it possible to take advantage of excellent airflow and water cooling options to vastly reduce temperatures on system components. The CPU mounting hole size has also been enlarged to make installing CPU heatsink backplates even more convenient, and the rubber grommets have been redesigned for improved cable management. Additionally, the CM 690 II Advanced (USB 3.0 version) is equipped with two USB 3.0 internal connectors for faster data transfer. The spacious mid-tower will keep enthusiasts happy with room for up to 3 Dual Slot graphics cards, high-end CPU coolers, top or bottom mounted water cooling radiators and 1.8"/2.5" drive adapters for easy upgrades.
- Enlarged front and top mesh design for superb ventilation
- Can accommodate an internal 120 x 240 mm radiator at the top and bottom
- Dust-control filters for all meshed areas
- Supports for up to 10 fans (up to 5 x 140 mm fans)
- External SATA docking station (X-dock)
- Rear tubing holes for water cooling
- Includes 1.8" & 2.5" HDD and SSD adapters
- More and redesigned rubber grommets for improved cable management
- Larger CPU heatsink cut-out on the mainboard tray
- Dimension (W / H / D): 214.5 x 496 x 528.8 mm
- 5.25" Drive Bays: 4 (without the use of exposed 3.5" drive bay)
- 3.5" Drive Bays: 6 hidden (4 removable), 1 exposed (converted from one 5.25" drive bay)
- I/O Panel: USB 2.0 x 2, Mic x 1, Audio x 1 (supports HD/AC97 audio)
- Front Cooling: 140 x 25mm blue LED fan x 1 / 1200RPM / 19dBA
- Rear Cooling: 120mm fan x 1 / 1200 RPM / 17dBA
- Top Cooling: Top: 120mm fan x 1/ 1200RPM /17dBA (supports 120/140mm fan x 2)
- Bottom Cooling: 120mm fan x 2 (optional)
- Left side Cooling: 120/140mm fan x 2 (optional)
- Right side Cooling: 80 x 15mm x 1 (optional)
- HDD cage Cooling: 120mm fan x 1 (optional)
- 2.5"/3.5"- SATA HDD Drive Bay: 2 (converted from one 3.5” drive bay)
- Maximum Compatibility: VGA card length:304mm / 11.96 inch
- CPU cooler height:177mm / 6.96 inch
Was £89.99 Inc. VAT
Only £74.99 inc VAT.
ORDER NOW
Cooler Master HAF X Gaming Tower Case - Black (RC-942) @ £130.00 inc VAT
The much anticipated HAF X arrives as the flagship of the popular HAF (High Air Flow) series. Designed for performance systems, this chassis is able to house today's latest and hottest CPUs, motherboards, GFX cards and is even USB3.0 compatible. With specialised support and cooling for graphic cards, massive airflow with the help of up to four gigantic fans and easy access to installed components, this is as close as it gets to a system builder's 'dream case'.
- Dimensions: 230 x 550 x 590mm ( W x H x D)
- Motherboard Compability: Micro- ATX, ATX and E-ATX
- 6 x 5.25" Drive Bays
- 5 x 3.5" Drive Bays
- I/O Panel: USB3.0 x 2, USB2.0, Audio x 2, e-SATA x 1, FireWire x1
- Cooling (Front): 230 x 30 mm red LED fan x1
- Cooling (Top): 200 x 30mm fans x 2 (1 included)
- Cooling (Side): 200 x 30mm fan x 1
- Cooling (Rear): 140 x 25mm fan x 1
- VGA Fan Duct: 120 x 25mm fan x 1 (not included)
- VGA Holder: 80 x 15mm fan x 1 (not included)
- PCI Slots: 9
- Base Mounted PSU Bracket
Was £139.99 Inc. VAT
Only £130.00 inc VAT.
ORDER NOW
Cooler Master Elite 372 Midi Tower Case - Black @ £31.99 inc VAT
Elite 372 is built for general desktop users and delivers high-end features that create opportunities for several upgrade paths while keeping the Elite 372 in an affordable market segment. Encased in a stylish shell, Elite 372 also offers efficient cooling via an ideal filter and ventilation layout. The roomy interior can contain long graphics cards such as AMD Radeon HD 5970. Additionally, Elite 372 comes with the front I/O panel, and tool-free design for quick assembly and easy maintenance.
- Outstanding cooling performance by vents at top, bottom, and side panel
- Tool-Free mechanical design for quick assembly and easy maintenance.
- Front I/O panel for easy access
- Compatible with Micro-ATX and ATX
- 7 expansion slots for flexibility of graphics card solutions
- Supports long graphics cards including AMD Radeon HD 5970
- Dimension (W / H / D): 192.5 x 427 x 498.3mm
- M/B Type: Micro-ATX, ATX
- 5.25" Drive Bay: 3 (exposed)
- 3.5" Drive Bay: 1 (exposed), 5 (hidden)
- I/O Panel: USB 2.0 x 2, Mic x 1, Audio x 1
- Expansion Slots: 7
- Top Cooling: 120mm fan x 2 (optional)
- Front Cooling: 120/140mm fan x 1 (optional)
- Rear Cooling: 120mm fan x 1, 80/90mm (optional)
- Side Cooling: 120/140mm fan x 2 (optional)
- Bottom Cooling: 80/90/120mm fan x 1 (optional)
- Power Supply: Standard ATX PS2 (optional)
- Maximum Compatibility: VGA card length: 315mm
- CPU cooler height: 163mm
Was £35.99 Inc. VAT
Only £31.99 inc VAT.
ORDER NOW
Cooler Master Sileo 500 Silent Case - Black @ £49.99 inc VAT
The cooler master's new soundproof definition to chassis. The Sileo 500 has installed sound proofing sound reduction material in 4 direction top, bottom, two sides of the chassis, anti-vibration pads in detachable HDD trays to absorb vibration and reduce noise, plus a comfort rare noise reduction pads for power supply. Besides Sileo 500 also has the tool-free technology for quick maintenance and upgrade. Sileo 500 create an absolute quiet environment, suitable for working office and study room.
- Sound-proof design for a quiet computing experience
- Subtle ventilation holes located between side and front panels
- Easy access front I/O panel with support for e-SATA, USB and Audio
- 5x 5.25" and 5x 3.5" tool-free design for easy installation and upgrade
- Aluminum bezel with Elegant design
- Detachable anti-vibration HDD pads for noise reduction
- Stylish front LED
Was £56.99 Inc. VAT
Only £49.99 inc VAT.
ORDER NOW
NZXT Phantom Enthusiast USB3.0 Full Tower Case - Orange/Black @ £94.99 inc VAT
NZXT presents the cutting edge Phantom Full Tower Chassis. Designed with sleek, pristine contours, the Phantom radiates personality and quality. As with all NZXT products, we strive to set apart our customers from the rest with unique, original designs – we run the extra mile so you won’t have to settle with the typical rectangular box. The Phantom delivers high performance cooling advantages with 7 fan cooling options, dual radiator support, quad watercooling cutouts, and five 20W per channel fan controls. An innovative 5.25” screwless system, vast space to encompass 7 hard drives, and five 5.25” bays enable smooth customization. Establish your power, your presence.
- High Performance Cooling Advantages
– Phantom’s extensive cooling capabilities include 7 fan cooling options with dual 200mm, single 230/200mm, triple 120mm, and front 140mm fan options.
- NZXT includes dual radiator support, quad watercooling cutouts, and an integrated fan controller with up to five 20W channels.
- Simple Installation
– Phantom celebrates an array of innovative features designed to enhance every stage of the build
- Meticulous cable management is easily attainable with large spacing behind the motherboard.
- Innovative all-new 5.25” screwless rails make installing and swapping HDDs an effortless process
- Rubber grommets dampens vibration during operation.
- LED on/off button to control fan lighting
- Rubber PSU and case feet to reduce vibration
- Easily removable front and top panels
- Top mounted USB, Audio/Mic, and E-SATA ports.
– Features support for larger heat sinks, graphics cards, and E-ATX motherboards enabling enthusiasts to include any of today’s hottest components
- Vast space within the enclosure allows for 7 hard drives with SDD support and up to five 5.25” bays
Was £109.99 Inc. VAT
Only £94.99 inc VAT.
ORDER NOW
NZXT Switch 810 Big Tower Case - Black @ £134.99 inc VAT
Experience the pinnacle of chassis design! Switch 810 is an epic hybrid case built for the hardcore PC enthusiast. This full tower chassis introduces a first of its kind concept for more versatility and adaptability to any configuration. It can be modified for superior water cooling or superb airflow through seamless operation. The Switch 810 is the ultimate powerhouse suitable for any type of PC enthusiast – whether you are liquid cooling, silent performance, or extreme airflow. You will have full control to customize all the features of Switch 810 based upon your preference.
Some unique features that set Switch 810 apart is the adjustable Hybrid Fins that reduce sound up to 40-60% when closed or open passageways for maximum airflow. Keep dust out by simply shifting the Hybrid Fins closed. Switch 810 has a rear LED light for illuminating the I/O in the dark, removable HDD cages for bottom radiator installation, a stealth bay, ability to mount triple 120/140mm radiators with 90mm of space, and potential to install up to 7 HDDs. For the first time, NZXT is introducing advanced HDD cages equipped with two 140mm pivot fans for directing airflow to the VGA and CPU. Anything is achievable with this chassis. You can only explore the infinite possibilities of PC expansion with the Switch 810.
- Unique hybrid full tower chassis optimized for extreme liquid cooling, airflow, or silence
- Supports high-end water cooling solutions up to three fans for push and pull configuration: 90mm of internal top space with top 360/420mm and bottom 140/240mm radiator support for unmatched liquid cooling
- Four watercooling cutouts for easy liquid cooling management on the rear panel
- Spacious CPU cutout for mounting high-end CPU coolers without removing the motherboard
- Removable top 5.25” plates to accommodate wide radiators
- Clever hybrid fin design allows the user to choose between maximum airflow or sound reduction
- Innovative right-mounted HDDs for easy hard drive replacement
- Removable HDD pull-out cages and large storage capacity for 7 hard drives
- Equipped with two 140mm pivot fan slots for directing airflow at 15^(0) to the VGA and CPU
- Rear white light for visibility in dark environments with a toggle switch
- Dual high-speed USB 3.0, hard drive dock along with a SD card reader for transfer and quick access to multimedia
- 5.25" hard drive hot swap with SATA III support
- Nine expansion slots for installing EATX motherboards with Quad SLI or Triple Crossfire
- Supreme cooling capacity with up to ten 140/120mm fans
- Stress-free wire management and 23mm clearance in the rear allows for superb wire-tucks
- Ten large specialized cutout holes for easy cable management
- Easily removable bottom filters in the front and rear to prevent dust from entering
- Tool-less 5.25” and 3.5”/2.5” SSD hard drive installation for convenience and ease of accessibility
- Large acrylic window with a view to show off the interior of your rig
- Dimenions: (W x H x D) 235 x 595 X 585 mm
- VGA Clearance Maximum: 375mm (w/out fan), 350 (installed), 285 (full pivot)
- Front Cooling: 2 X 120/140mm (1x 140mm included)
- Rear Cooling: 1 X 120/140mm (1x 140mm included)
- Top Cooling: 3 X 120/140mm (1x 140mm included)
- Bottom Cooling: 2x 120/140mm
- Interior Cooling: 2x 120/140mm (1x 140mm included)
- Large acrylic window
- Drive Bays: 4 External 5.25" Bays / 6 Internal 3.5" Bays
- Screwless Rail Design
- Expansion Slots: 9
- Motherboard Support: E-ATX, XL-ATX, ATX, MICRO-ATX, Mini-ITX
Was £149.99 Inc. VAT
Only £134.99 inc VAT.
ORDER NOW
Xigmatek Pantheon Mid Tower Case - Black @ £35.99 inc VAT
Pantheon – Rome’s temple of gods. Big and impressive by a great architecture and dedicated engineering for all your hardware, Xigmatek proudly presents our latest exclusive chassis – the Pantheon. Decent design combined with features such as our tool free design for the 5.25” bays, 6 hot swap hdd cages including anti vibration, black interior and exterior, usb 3.0, 2 fan controllers, last but not least also the radiator support of 240/280mm radiator on the top. Get yourself a piece of ancient experience and flair and start the combat with Pantheon!
Two 2.5”/3.5” front-opened hot-swappable HDD trays; USB3.0 super-speed port and two fan speed control knobs on the top panel; Both side screw-less ODD holders with anti-vibration rubbers; Thumb screws for add-on card easy installation; 1 Year Warranty
- Dimension: 206(W) x 543(H) x 500(D) mm (8.1*21.4*19.7 inches);
- Drive Bay: External x 4 with both side tool-free holders with anti-vibration rubbers;
- Expansion Slot: 7 slots, 330mm free length for long card.(Thumb screws);
- Motherboard Support: ATX, Micro ATX (with cooler blackplate easy installation window);
- Power Supply: Standard P/S2 ATX/EPS power supply unit; 1. Intake airflow hole with dust filter; 2. - Available for face upward and downward installation; 3. Within anti-vibration rubber;
- Cooling System: Air-cooling; Front Fan: Pre-installed 120mm white LED with black blades x 2 on HDD cage and LED is on/off switchable.(Max. four 120mm fans on HDD cage both side.); Rear Fan: Pre-installed 140mm white LED with black blades x 1 and LED is on/off switchable.(120mm fan is available); Side Fan: Pantheon-Original: Optional 120/140mm fan x 2 Bottom Fan: Optional 120/140mm fan x 1 (with dust filter); Top Fan: Optional 120/140mm fan x 2 or 170mm fan*1; Fan Speed Control: Six fan speeds are adjustable synchronously by two knobs on top panel; Water-cooling; Water pipe holes x 4 (with rubber cover) Available for 240/280mm radiator on the top; Radiator size limitation inside of top panel : (L)290*(W)130*(H)42mm;
- I/O Panel Top Panel: Power switch, Reset switch, USB3.0*1, USB2.0 x 2, e-SATA x 1, Audio in/out x 1 (HD Audio), two knobs of fan controller;
Was £44.99 Inc. VAT
Only £35.99 inc VAT.
ORDER NOW
