Hello Newbie here, so please be gentle with me.
I was upgrading the memory on my Supermicro X10DRi and forgot to refit the air shroud during startup and the machine passed POST but stalled part way through booting the OS.
Switched off and fitted the shroud but now the board starts the fans on application of power, displays the flashing LED near the PCIe cards but does not show power on the Green LED near processor 1 but the PCIe HBA is powered.
I have tried
Removing all the PCIe cards.
Removing all memory except the original DIMMs.
Removing processor 2 (Which is furthest from the fans and therefore was the hottest).
Running with processor 2 in CPU slot 1.
Removing all the DIMMs.
The strange thing is the machine can be switched on or off with the power button, but it always starts when power is applied even if it was previousy off.
Any ideas, or help would be greatly appreciated.
I was upgrading the memory on my Supermicro X10DRi and forgot to refit the air shroud during startup and the machine passed POST but stalled part way through booting the OS.
Switched off and fitted the shroud but now the board starts the fans on application of power, displays the flashing LED near the PCIe cards but does not show power on the Green LED near processor 1 but the PCIe HBA is powered.
I have tried
Removing all the PCIe cards.
Removing all memory except the original DIMMs.
Removing processor 2 (Which is furthest from the fans and therefore was the hottest).
Running with processor 2 in CPU slot 1.
Removing all the DIMMs.
The strange thing is the machine can be switched on or off with the power button, but it always starts when power is applied even if it was previousy off.
Any ideas, or help would be greatly appreciated.