swiftech apex ultra

johnno

johnno

johnno

Associate
Joined
11 Dec 2005
Posts
360
Location
the mighty hereford
gunna get myself one of these.but the only thing is people say you have to drill out the holes on the cpu block. now do i have to do this. also *** sort of temps can i expect to see on a 3800+x2 @2.5ghz. my freezer 64 cools it idle at 24oc and full load about 40oc will i see a difference in temps??
 
johnno said:
gunna get myself one of these.but the only thing is people say you have to drill out the holes on the cpu block. now do i have to do this. also *** sort of temps can i expect to see on a 3800+x2 @2.5ghz. my freezer 64 cools it idle at 24oc and full load about 40oc will i see a difference in temps??
Click to expand...

drill holes on the cpu block???, think about it , it'll leak al over your comp.

you need to reseach watercooling before you decide.

you will notice load temps mainly.
 
no i have heard people talking the holes being the wrong size or something and by the way i have researched watercooling.
 
I had to and know of a few others that had to make the holes larger on the block but I also know of some that didn’t need to. Its not had just needed to be made a mm or two bigger. ;)
 
johnno said:
no i have heard people talking the holes being the wrong size or something and by the way i have researched watercooling.
Click to expand...


ah, you talking about the bracket on block,
cant say i heard of anyone drilliing the holes to make screws fit, i guess it does happen.
blocks i have fitted straight in.
when you get the kit , check the holes for correct fitness.
 
You must log in or register to reply here.
Back
Top Bottom