Team Group Pro Dark DDR4 help

hlennie · 22 Jul 2016 at 13:03

Hey guys Need some help I am currently running.

2 x 4GB DDR4 3000 15-15-15-35 1.35V the problem being I cant seem to run them @ 3000 with out using up to 1.4 / 1.5v on my motherboard.

They also don't seem to be good over clockers but price is great I have managed to tweak settings.

3067 @ 14-15-15-30 1.4 v.

any one currently using these modules point me in the right direction/tips?

danlightbulb · 22 Jul 2016 at 13:20

I had a mess around with my ram recently too after i was struggling to get stability at rated speed.

What voltage are you playing with?

The ones to try are
Ram voltage - 1.35v or close to
VccIO - try between 1.1 and 1.2v
VccSA - try between 1.15 and 1.25v

hlennie · 22 Jul 2016 at 13:40

tried voltages from rated 1.35 up to 1.5v anything less than 1.4v when @ rated 3000 speed and its a no boot.

VccIO and VccSA had no effect last time I tried ill give it another go.

EDIT... voltage @ 1.4v motherboard error beeps for memory will only boot 3000 @ 1.5 VccIO VccSA have no effect

stulid · 22 Jul 2016 at 16:08

Is the boards bios up to date.

Try using the matching pair of slots furthest from the cpu.

So if you are counting them 1-4 with 1 being next to the socket, use 2+4

hlennie · 23 Jul 2016 at 07:55

If I update the bios I think ill loose the overclock on the cpu as this is a non K cpu

stulid · 23 Jul 2016 at 09:00

Yes you will.

Did you do this overclock yourself or was it part of a purchased bundle? if you did it yourself you should be able to make a note of the settings used and reapply afterwards.

hlennie · 23 Jul 2016 at 16:13

did it my self.

I mean if I update the bios on the board I will no longer be able to overclock the cpu as overclocking will be locked out for non k processors with a bios update I'm led to believe.