Temp sensor

joedeath332 · 30 Oct 2020 at 10:33

So when I ordered my watercooling bits i bought a Barrow temperature sensor
http://www.barrowint.com/plus/view.php?aid=1284
I have the sensor installed in the loop ok but I am at a loss where to connect the two pin connector that is on the sensor to my motherboard
My motherboard is a Gigabyte z390 auros elite.

Defy Belief · 30 Oct 2020 at 10:54

If your motherboard doesn't have a temp sensor you'll need a controller with a sensor input, such as this;
https://www.overclockers.co.uk/aqua...MIuuDOq5Pc7AIVm-vtCh2IJAXNEAQYASABEgKWzvD_BwE

joedeath332 · 30 Oct 2020 at 19:47

Defy Belief said:
If your motherboard doesn't have a temp sensor you'll need a controller with a sensor input, such as this;https://www.overclockers.co.uk/aqua...MIuuDOq5Pc7AIVm-vtCh2IJAXNEAQYASABEgKWzvD_BwE

Thanks , i would have thought my MB would have had one as its a decent board

pastymuncher · 1 Nov 2020 at 11:56

I just checked your manual and the Elite doesn't have any temp sensor headers, only the Pro and up. I have the Pro and the headers are near the top of the board just above the 24 pin socket between the memory slot and fan headers. If your board had them it would have also came with a pair of temp probes in the box.