• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Temps for e2180

masten

masten

masten

Associate
Joined
6 Sep 2007
Posts
178
Just got an e2180 going in on an evga nforce ultra 650i motherboard using stock cooler.

Ran it for 5 mins and in BIOS went up to about 55 degrees. Is that right?

Fan is set to some auto thing. Running at about 1760rpm I think.

I did have a bit of a problem getting one of the cooler legs in to the motherboard. It's secure but one of them wouldn't click all the way in and there's no way of making it do so as when you press it the board just gives and bottoms out against the case.
 
Last edited:
Hi. Well if Im 20c higher than yours then thats way too high isnt it? My heatsink cant be attached right. Have to have another go at it. I hope I dont have to take the motherboard out cos its well hard to get in and out.
 
According to this review:

'The EVGA nForce 650i Ultra motherboard gave me no problems throughout the review. All tests ran through without so much as a lockup although Super PI's 32M test refused to run without a Vcore increase to 1.3V. I also bumped the memory voltage up to 2.0V from 1.65V and the NB voltage to 1.3. The stock Intel cooler performed very well other than the noise the fan puts out as it amazed me in maintaining CPU idle temps at as low as 35C. During testing, especially with Super PI the CPU core temps were kept in the mid 50s with ambient room temps around 26C with humidity running less than 60%. That is much better than I expected from the stock cooler'

it should run at 35c when idle. That's with an e6300 though. Looks like Ive got it in wrong!
 
Last edited:
Guess Ill have to take it off and re-seat it then. Will that mean the thermal paste that was aleady applied will be buggered and Ill have to put more on which I havent got?
 
Sorted it. With the computer upright I got a torch and looked at each of the pins as they come through the back of the mobo. Saw that 2 were inly half in. Had to support the back of hte board by pressing something through the holes in the case and then giving them a right old press. And they went in.

Now runs at 35c

Thanks for the help
 
You must log in or register to reply here.
Back
Top Bottom