temps help

krisbutler · 10 Mar 2008 at 16:18

hi just overclocked my e6850 to 3.8ghz prime95 stable 8hrs (could do more but i stoped test)

just wondering if the temps are ok on load im getting

room temp is @ 25

the max temp on both cores is @ 66

idles @ 35

this is with the cpu @ 1.45v in the bios the nb is @ 1.49v in bios and ram is 2.2v in bios

im using a swiftech 220 ultra water cooling kit

cheers 4 the help

spb251272 · 10 Mar 2008 at 16:22

What are you using to load the cpu? If that's 66 max on P95 small FFT's then I'd say you're fine. My q6600 at 3.6 goes up to high 60's on small FFTs.

krisbutler · 10 Mar 2008 at 16:29

used blend and small ffts both go 2 the same

spb251272 · 10 Mar 2008 at 16:30

Then I'd say those temps are fine

bbasra · 10 Mar 2008 at 16:32

e6850 to 3.8ghz, thats a good OC.

krisbutler · 10 Mar 2008 at 16:59

it boots at 4080mhz but the temps are well up into mid 70s so i stopped there what could be my limiting factor in my wc setup? i only have the cpu cooled with the kit