TFII 50ti in sli.

[Idleman]

Already have one card installed using both 6pin connecters.
With both cards there is a dual molex to 6pin connecter. Now, i only have one psu cable which is being used to power my bluray and hotswap drive.
Do i need to connect 2x6pin to the second card or just use the molex adapter, which would mean only one 6pin being. As only one comes supplied with the card, am i safe to assume this this is ok.
As you can tell, never used sli/cf before.

 

[Idleman]

Did`nt realise this was such a taxing question.

 

[decto]

I used 1 x 6pin to each card, then used a twin molex to PCI-E for each card from 4 separate psu outputs.

You'll need a least a good brand 600W supply... what PSU do you have

AD

 

[Idleman]

I used 1 x 6pin to each card, then used a twin molex to PCI-E for each card from 4 separate psu outputs.

You'll need a least a good brand 600W supply... what PSU do you have

AD

ocz 600w modztreme pro. But i`ve also got a corsair tx750, which has enough pcie connecters. I think i`ll just have to install the corsair. Probably should have worded my question a bit better.