* The New Cases Gallery *

JamesM · 4 May 2014 at 12:02

New mobo, cpu and some Monsoon fittings (need to get some more)

sellw88 · 14 May 2014 at 21:40

Just thought I would share the new case / W/C setup. Just moved over from a white/blue Phantom 410 to the NZXT H440 Black/Red - Really Lovely Case

If only the case could have stayed this tidy!

All Wired Up:

Overall:

Lighting Demo (excuse the dust!):

Really pleased with the outcome!

vUNREALv · 15 May 2014 at 21:45

Beautiful job their sellw88, the only thing that could improve the look imo would be some braided cables for the gpu and atx.

sellw88 · 17 May 2014 at 14:28

Thankyou Unreal - yes i completely agree!
With a non-modular power supply i'm going to look into how to go about doing it. Its the one bit of the case that isnt colour coded so really stands out!

Fulax · 17 May 2014 at 14:36

Just get some of Bitfenix's braided cable extensions: http://www.overclockers.co.uk/productlist.php?groupid=701&catid=1428&subid=2656

Simple, and they really do finish off a colour-coded build.

sellw88 · 17 May 2014 at 14:43

Cheers - had just spotted those when looking into the sleeving - not badly priced when i consider the amount of time it would take to complete!

RetrogamerX · 17 May 2014 at 19:25

MOOGLEYS said:
The 780 hits about 78.c max @ 1150/3200. It's a stock 780 so it sucks air in through the side vent and blows it out the back.

The PC is used for gaming.

And that's not a bad temp either. Nvidia has the best ref cooler too.

vUNREALv · 18 May 2014 at 17:59

sellw88 said:
Cheers - had just spotted those when looking into the sleeving - not badly priced when i consider the amount of time it would take to complete!

I can fully recommend the Bitfenix cables, they are very nice quality (better than the nzxt ones imo) Its a shame you will need 2x8pin ones for the 7970 as I have a spare pair of 6pin bitfenix cables I would have let you have.

Blackwhite · 18 May 2014 at 20:14

H100i out, NH-D15 in

delpy8 · 25 May 2014 at 11:55

damov3 said:
** No image quoting **

Beautiful looking case what did you use to cover the ssds

dodo21x · 25 May 2014 at 13:57

I'm not sure about one thing. GPU Cooler... Will reference will be better solution for this case ? What do you think ?

JamesM · 27 May 2014 at 13:50

Have you got the top fans installed? If so then you'll be fine

IC3 · 2 Jun 2014 at 02:01

dodo21x said:

What mouse is that?

Edit

NAOS 5000?

Divine Pain · 2 Jun 2014 at 13:11

dodo21x said:
I'm not sure about one thing. GPU Cooler... Will reference will be better solution for this case ? What do you think ?

I would only worry if you had a windowed side panel. But you don't so you should be fine.

Gripen90 · 2 Jun 2014 at 22:15

Tazzimus · 6 Jun 2014 at 21:55

My current set up, only a low-mid level gaming PC but I add to it as I go so it's a constant work in progress. Motherboard and RAM are next to go with the colour scheme and maybe another fan or two.

JamesM · 7 Jun 2014 at 07:18

LD Cooling V7

Work in progress, still waiting for bits of my water loop to arrive before I can plumb everything back in

https://www.dropbox.com/s/9rjylvtypk8utg5/WP_20140606_22_35_56_Pro.jpg
https://www.dropbox.com/s/lit2f3t10ofqztt/WP_20140606_22_36_05_Pro.jpg

flame696 · 7 Jun 2014 at 11:04

That's a really nice case James must have cost a pretty penny

JamesM · 7 Jun 2014 at 12:55

It wasn't cheap lets put it that way haha.

But i've got another 360 grill on its way for the front so it will be housing two 360 radiators and still has space for 8 HDDs, long length PSU etc.

Full aluminium so doesn't weigh a ton.

Plan is to have 6 intake fans and 1 exhaust to create positive pressure in the case to try and keep the dust out.

Have ordered some single slot PCI brackets for my 7990s too.

snips86x · 12 Jun 2014 at 20:05

I've been plastering it around, so I may as well do one more.

Here it mine

*** The New Cases Gallery ***

* The New Cases Gallery *