Looks smart Pete, love the subtle colour scheme.
*** The New Cases Gallery ***
- Thread starter ThundyCat
- Start date
Here is my new build. Just finished it yesterday.
Intel 6600K
Asus Z170i ITX
16GB Corsair DDR4
R9 380 4GB
Thermaltake Core V1
Corsair AX860I
Nice build. Is your 6600k overclocked? If so what volts? What load temps are you getting?
Matt
Yeh it was the cable management of a blind person I think lol
The Pc was getting noisey so thought best sort it out . Just not had the time or space to do much for quite some time . Hardly any noise from it now. When I get my own place again I'll do it properly , still not sure I'll get it to the standard of most of them on here though
Also could do with sorting my storage out and getting another ssd and getting rid of the normal ones
The Pc was getting noisey so thought best sort it out . Just not had the time or space to do much for quite some time . Hardly any noise from it now. When I get my own place again I'll do it properly , still not sure I'll get it to the standard of most of them on here though
Also could do with sorting my storage out and getting another ssd and getting rid of the normal ones
Soldato
- Joined
- 9 May 2005
- Posts
- 2,511
Associate
- Joined
- 2 Feb 2014
- Posts
- 105
Intel Core I7 4770k
Corsair H100I(OEM)
Asus Gryphon z87
4x4GB assorted Ram
EVGA 970 FTW+
Cooler Master V850
Cooler Master N200
Corsair H100I(OEM)
Asus Gryphon z87
4x4GB assorted Ram
EVGA 970 FTW+
Cooler Master V850
Cooler Master N200
Soldato
- Joined
- 6 Jan 2013
- Posts
- 22,389
- Location
- Rollergirl
Went back to the Air 540 to accommodate the Rampage V and Noctua cooler.... With a little room left over for another 980Ti if Pascal doesn't measure up. 
Soldato
- Joined
- 11 Mar 2013
- Posts
- 5,590
Soldato
- Joined
- 6 Jan 2013
- Posts
- 22,389
- Location
- Rollergirl
what red lighting you using String? I have a run of red LED's across the top of mine but the effect is no where near as good
It's one strip of Akasa Vegas Red along the top and down the front half.
https://www.overclockers.co.uk/akasa-vegas-red-led-strip-light-60cm-cm-034-ak.html
It's actually much more subtle than it looks in those photos, I've taken the case side panel off because with it on all the internals look blurry in a photo. It's the perfect colour to have so close to the screen because it gives off very little glare and it also compliments the ROG theme really well.
Soldato
- Joined
- 6 Jan 2013
- Posts
- 22,389
- Location
- Rollergirl
Daylight photo with cover on, just to illustrate the point...
Gave the case (Nanoxia Deep Silence 5) a clean up today and took these whilst the cleaning out the dust.. which seems to have just resettled back where it was. 
Very happy with the case, unbelievably solid and extremely quiet. Fans move a decent amount of air and are virtually silent. i5 4690K @ 4.4Ghz goes to a MAX of 63c in it. Door means the fan controller must be inside or set back and where else do you put a wireless controller dongle? 
^ The eagled eyed will spot white-tack. Yes, the plastic in the SATA port broke, so this is the bodge that makes it work.
Oh, and the IO shield. It just will not fit. I couldn't care less as once everything is in, it doesn't move or get touched/seen again.
Very happy with the case, unbelievably solid and extremely quiet. Fans move a decent amount of air and are virtually silent. i5 4690K @ 4.4Ghz goes to a MAX of 63c in it. Door means the fan controller must be inside or set back and where else do you put a wireless controller dongle? ^ The eagled eyed will spot white-tack. Yes, the plastic in the SATA port broke, so this is the bodge that makes it work.
Oh, and the IO shield. It just will not fit. I couldn't care less as once everything is in, it doesn't move or get touched/seen again.
Last edited:
Soldato
- Joined
- 7 Jan 2009
- Posts
- 6,920
Put some castor wheels on my case,Makes moving it out from under my desk so much easier now for accessing the rear or generally just to dust it out as its VERY heavy!
Sorry for the bad pics,Best amount of light i could get in the room and only have a Phone camera. :/
Specs -
Sorry for the bad pics,Best amount of light i could get in the room and only have a Phone camera. :/
Specs -
- i7 3770K
- Z77X-UD3H
- Corsair H60i 2013
- 8GB G.Skill Ripjaws 1600Mhz CL7
- GTX 970 EXOC Silent.
- 2x 840 EVO 250GB Raid0
- XFX Pro 650W Core Edition
- X-Fi TITANIUM HD
- Windows 10 Pro x64.
Last edited:
A very recent budget build to tide me over for a couple of years...
Corsair Carbide Air 540
Antec VP600P PSU
Asus M5A97 Evo R2.0 motherboard
16GB Kingston Genesis DDR3-1866 RAM
AMD Phenom II X4 960T CPU
Radeon HD 7970
256GB Sandisk SSD and Maxtor 500GB HDD
I moved the Phenom from another machine where it was paired with a 5850. While that was a decent machine it's much better suited to the 7970.
Need to dig out the soldering iron as I have some LED strips to add.
Corsair Carbide Air 540
Antec VP600P PSU
Asus M5A97 Evo R2.0 motherboard
16GB Kingston Genesis DDR3-1866 RAM
AMD Phenom II X4 960T CPU
Radeon HD 7970
256GB Sandisk SSD and Maxtor 500GB HDD
I moved the Phenom from another machine where it was paired with a 5850. While that was a decent machine it's much better suited to the 7970.
Need to dig out the soldering iron as I have some LED strips to add.
Last edited:
Browse this forum daily so thought I would upload some pics of my build.
A recent upgrade to a custom waterloop and also popped in an R9 390 to play some of the new games releasing this year.
Still rocking my i7 920 @ 4Ghz. I'll be upgrading to a new platform soon so just holding fire for now.
A recent upgrade to a custom waterloop and also popped in an R9 390 to play some of the new games releasing this year.
Still rocking my i7 920 @ 4Ghz. I'll be upgrading to a new platform soon so just holding fire for now.
I really shouldn't be posting in this thread.
looks like mine at the moment! waiting on some new braided cables then i will get some pics up.