The New Lian case. Li PC-7 SE-B II
- Thread starter humax
- Start date
The Lian PC 7 SE II housing represents again improved, particularly for PC-Cooling manufactured a variant to successful PC 7 of model.
In the “Special edition II” the housing ventilation was continued to optimize. Three 3.5” drive assemblies (HDD) can internal be installed. The housing is completely from aluminum manufactured and thus extremely easily - due to its conception in particular for Overclockingzwecke or however the employment with Lan Parties very well suitable. The integrated ventilation system makes a clear sinking for the interior temperature possible of the housing. The material aluminum contributes likewise to an improved heat dissipation. Altogether nine drive assemblies can be inserted (4 x 5.25” and 2 x 3.5” externally, as well as 3 x 3.5” internally).
The scope of supply contains three transparent 120 x 120 x 25 mm of Cooltek Ultra silent exhaust (17 dBa, 1,000 rpm):
# An exhaust provides within the lower housing range for cooling and the Einströmem of refreshing fresh air - air is led directly over the non removable disks. Air flowing in is led by a filter cartridge. The filter cartridge can be removed for the cleaning.
# Second 120 mm the exhaust sucks off warmed up air at the back.
# Again more appropriate and parallel to the Main board a more adjustably 120 mm of exhausts is laterally over the PCI Slots, which serves for the direct warm air removal of the blocked plug-in cards. Current diagram map radiators can be effectively supported in such a way in their cooling performance.
All three exhausts are provided with an exhaust lattice and have a 3-poligen Molexstecker.
In the frame cover is a ventilator opening, to which further 80 mm an exhaust (screwing assembly) can be installed.
The side panels are fastened with Thumbscrews - the front screen is attached to the chassis (art off tie-clips). The drive assembly covers consist likewise of aluminum.
In the lower housing front are connection types for:
- 2 x USB haven (2.0)
- 2 x connection for sound (Micro, Headphone)
- 1 x Firewire
Appropriate components can be attached so simply and comfortably from the front.
In the “Special edition II” the housing ventilation was continued to optimize. Three 3.5” drive assemblies (HDD) can internal be installed. The housing is completely from aluminum manufactured and thus extremely easily - due to its conception in particular for Overclockingzwecke or however the employment with Lan Parties very well suitable. The integrated ventilation system makes a clear sinking for the interior temperature possible of the housing. The material aluminum contributes likewise to an improved heat dissipation. Altogether nine drive assemblies can be inserted (4 x 5.25” and 2 x 3.5” externally, as well as 3 x 3.5” internally).
The scope of supply contains three transparent 120 x 120 x 25 mm of Cooltek Ultra silent exhaust (17 dBa, 1,000 rpm):
# An exhaust provides within the lower housing range for cooling and the Einströmem of refreshing fresh air - air is led directly over the non removable disks. Air flowing in is led by a filter cartridge. The filter cartridge can be removed for the cleaning.
# Second 120 mm the exhaust sucks off warmed up air at the back.
# Again more appropriate and parallel to the Main board a more adjustably 120 mm of exhausts is laterally over the PCI Slots, which serves for the direct warm air removal of the blocked plug-in cards. Current diagram map radiators can be effectively supported in such a way in their cooling performance.
All three exhausts are provided with an exhaust lattice and have a 3-poligen Molexstecker.
In the frame cover is a ventilator opening, to which further 80 mm an exhaust (screwing assembly) can be installed.
The side panels are fastened with Thumbscrews - the front screen is attached to the chassis (art off tie-clips). The drive assembly covers consist likewise of aluminum.
In the lower housing front are connection types for:
- 2 x USB haven (2.0)
- 2 x connection for sound (Micro, Headphone)
- 1 x Firewire
Appropriate components can be attached so simply and comfortably from the front.
Last edited:
The small print says
Dimension: 210x450x490 mm ( W,H,D)
- Drive bays 4x5.25", 2x3.5", 3x3.5" internal
- Fan: 12 cm ball bearing x 1, 8 cm sleeve fan x 1
- M/B type: ATX & pentium 4 (max size: 12"x9.6")
- PSU Type:ATX
- USB2.0 x 2 IEEE 1394 x 1MIC x 1EAR x 1
so to me it looks like it has a 12cm fan on the front and only a 8cm fan on the back or is a sleeve fan the one on the side of the case ?
Dimension: 210x450x490 mm ( W,H,D)
- Drive bays 4x5.25", 2x3.5", 3x3.5" internal
- Fan: 12 cm ball bearing x 1, 8 cm sleeve fan x 1
- M/B type: ATX & pentium 4 (max size: 12"x9.6")
- PSU Type:ATX
- USB2.0 x 2 IEEE 1394 x 1MIC x 1EAR x 1
so to me it looks like it has a 12cm fan on the front and only a 8cm fan on the back or is a sleeve fan the one on the side of the case ?
