** The Official "Will it fit" Thread **

[Deleted member 651465]

BUMP ARCHIVE BUMP .. few people asking about the X1900XT's

Anyone actually fitted one (with a piccie to show)??

 

[cmt]

BUMP ARCHIVE BUMP .. few people asking about the X1900XT's

Anyone actually fitted one (with a piccie to show)??

Me, will post piccie later today

cmt

 

[cmt]

As Promised X1900XT (Powercolour) / SN25P

cmt

 

[nichorob]

Would i have any trouble with a SN26P and a 7900 GT?

 

[chaparral]

My sn26p with x1900xt-x and 7800gtx sli

 

[Deleted member 651465]

Would i have any trouble with a SN26P and a 7900 GT?

No.

Check the top post for sizing of the SN26P

 

[storm^chop]

OcUK GeForce 7800GTX SILENT Extreme 256MB & SN21G5?

Will OcUK GeForce 7800GTX SILENT Extreme 256MB GDDR3 TV-Out/Dual DVI (PCI-Express) (GX-033-OK) fit into a SN21G5? (possibly a stupid question )

 

[Deleted member 651465]

Will OcUK GeForce 7800GTX SILENT Extreme 256MB GDDR3 TV-Out/Dual DVI (PCI-Express) (GX-033-OK) fit into a SN21G5? (possibly a stupid question )

Do you mean the ST20G5 mate?

If on the other hand, you do actually mean the SN25P then - yes

 

[Derang3d]

Will OcUK GeForce 7800GTX SILENT Extreme 256MB GDDR3 TV-Out/Dual DVI (PCI-Express) (GX-033-OK) fit into a SN21G5? (possibly a stupid question )

Nope. One user modded his SN21G5 in order to accomodate the 7900GTX 512Mb (same cooler as the GTX Silent).

Link

 

[Deleted member 651465]

SN95G5 4tw.

Ugly mod imo

 

[Sin_Chase]

SN25P
C3D x850XT PE

Fits... just. No modding required.

The HSF plastic shrouding is about half a mm from the cable routing clip on the PSU. It can be removed/repositioned but it is something to bear in mind with taller cards.

 

[AceCard]

7900gtx and sn25p anyone??

also

iceq3 x1900xt/xt-x with sn25p???


ANY help/links appreciated greatly.

 

[PlatinumFX]

iceq3 x1900xt/xt-x with sn25p???


ANY help/links appreciated greatly.

I told you last week it doesnt.
Not without removing the air shroud.
What you might want to ask (though not here) is if its ok to run an SN25P without the shroud.

 

[AceCard]

I told you last week it doesnt.
Not without removing the air shroud.
What you might want to ask (though not here) is if its ok to run an SN25P without the shroud.

of course it is ok without the shroud, its only a small plastic part(which the sn26p does away with completely)
mine is removed already even though i dont have a large gfx card at the moment and my temps are still rock solid

idle 20-28c load 28-38c - thats with a 3700 oc'd to fx57 speed.

but i still need to find out if it fits, the x1900xtx above fits ok, and i THINK the hs/fan of the iceq3 is same thickness.........just longer on the pcb. platinum fx you can tell me something though, does the end of the cooler protrude where the fan is?? or is it flat the length of the crad.

 

[Massive Attack]

anyone got a better cooler in an sn25p like arctic 64 pro or any other aftermarket cooler

cheers

 

[Deleted member 651465]

The Shuttle I.C.E cooler is better than most aftermarket coolers

 

[Massive Attack]

The Shuttle I.C.E cooler is better than most aftermarket coolers

really?? didnt look to good, is it suitable for a nice overclock say 2.8 on a 3700 sandy

 

[cokecan]

as EVH said, the I.C.E is a v.good cooler

though i dont have a 25P, from previous shuttles that used the I.C.E (albiet is a slightly different design to the 25p's but still same performance wise) it kept my old 2500-M at 2.6ghz with 2v vcore at nice temps (55odd full load) with a 120mm fan on it

 

[Massive Attack]

as EVH said, the I.C.E is a v.good cooler

though i dont have a 25P, from previous shuttles that used the I.C.E (albiet is a slightly different design to the 25p's but still same performance wise) it kept my old 2500-M at 2.6ghz with 2v vcore at nice temps (55odd full load) with a 120mm fan on it

how the hell did you get a 120mm fan on that

 

[cokecan]

wedged inbetween the graphics card and psu in the g-type chassis lol