• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

The Pascal Titan X and XP Owners Thread

Got it installed & gonna try overclocking & noise now. Then it's on to testing games at 4k. I hate the green logo but not sure I want to mod a £1100 gpu just yet.
 
After setting power limit to 120% and temp limit 85C with manual fan at 70% using stock speeds Heaven settled at a clock of 1746mhz stable after temps had settled, reaching up to 80C after 5 or so mins. It maxed at the beginning at 1822mhz for a few seconds.
 
What early overclocks are everyone using on air?

I just used the guru3D ones:

Power Limit : 120%
Temp. limit : 87C
Core Clock : + 180
Memory Clock : +550 MHz

Fire Strike Ultra: 7124
 
Just tried overclocking. Temps with fan at 75% reach 85C after 10 mins. Tried core clock & got upto +230. Unstable at +240 & very unstable at +250. Memory on it's own reached my goal of +500. Will test core & mem together for 10 mins & if it passes I will try Mirror's Edge Catalyst & Witcher 3 which are known to be awkward on overclocks.

75% fan speed is okay for me, wouldn't want over 80% otherwise noise will intrude way too much. Think I will try a custom fan curve, I hope it can keep temps at 85C or just above at 75% - 80% max though as that is not too bad considering.
 
+230 & +500 seems okay for now on Heaven so I think I will stick with it & see if anything different happens while gaming.

Clocks reach 2037mhz when it first starts when temps are low & then when temps at above 80C it hovers around 1974mhz with a few dips below on occasion. I had a target of being at 2000mhz so it is pretty close to being like my 1080 overclock. My 1080 hovered at late 1900's - early 2000's when gaming fully stable with +500 on the memory, hopefully gaming will not let me down on the titan. With similar clocks & memory the extra titan power will be in full force.
 
Tested Witcher 3 for 10 mins & the overclock above is holding fine. On this game the core clocks can go as low as 1936mhz.

Tried memory overclocking on this game. It had green blobs at +600 with my core OC on as well at 85C. The FPS results for memory with core OC on as well were +400 52fps, +500 53fps & +600 (unstable) 52fps. It seems just like the 1080 that +500 is the sweet spot at 4k or any resolution I would assume although I have not tested this.
 
I thought +230 core was stable until something popped my bubble, sure it was TW3, everything else I tried it was fine though. +600 memory is when I started running into issues and I had less FPS than 500. I just run 220/400 for my 24/7 till I go hybrid, I'm sure it'll top my best 230/550.
 
Had shopping to do last night and by 9pm couldnt be bothered starting it.

Missing 4 bits which will arrive today.

Will be on the case tonight though :)

And yes, Titan box not even opened to smell it :(

Even if I get it plumbed up tonight, there will be 24 hr leak testing. Aiming for the weekend up and running :)

sadly by then, two days later the waterblock will arrive so wondering if there is little point as I will have to drain the loop again so might wait.
 
Got +220 on clock, but not overclocked the memory. Currently just Folding @ Home with it. :D

TitanXOverclock.PNG


Temp a little high due to a GTX970 in the same case overclocked and running F@H. :rolleyes:


I did have it in a games machine and the temp at similar overclock was around 66°C:

TitanXPascalOverclock.png


You can see where I kept pushing the overclock until it fell over @ +250. :D
 
Some shots of Witcher 3 FPS at various places with my OC in place.

EDIT: top shot should have 55fps & settings are max except hairworks off, AA, motion blur, DOF, vignette off. Running with G-Sync so fps is capped at 60 max













 
Last edited:
You must log in or register to reply here.
Back
Top Bottom