The Silence
- Thread starter natsu
- Start date
After purchasing FT02 I decided that my next build will be in SS case as well and there it is. I'm sure some of You recognized the logo
Silverstone TJ07
This build log will start in about 8 weeks, I started working in sketchup with desing for the case, looking for covers that I would like to have and I can say that 99% of desings are ready. There will be acrylic and barrow fittings with no fill ports so image the lenght of the tube
There is not going to be x99 tri sli 64gb build. I'm using my old hardware which is:
CPU - i5 2500k / EK Supremacy Clean CSQ
GPU - Asus GTX670 DC2 / EK GTX 670 Plexi (polished)(this probably will be swapped for 970 strix since block is compatible)
SOUND - Xonar D2X
RAM - 2x4GB Kingston HyperX 1600mhz
MOBO - Biostar TP67XE -> replaced with GB Z77X UP7
SSD - Samsung 128GB + 2TB External HDD
PSU - Super Flower 650W Golden Green
Radiator - HW Labs SR1 560mm -> replaced with XSPC RX 480
Pump - Alphacool MCP655 PWM / EK D5 Plexi Top (Polished)
Res - XSPC Photon 170
As I mentioned the desing of the loop is ready and this is how it looks. Originally there was supposed to be 2 photons but I decided It would be to crammed in there and now there is only one.
Top window will be slighlty modified version of this
On ther other hand I have a big headache with front cover and will need Your input on which one should I choose.
Can't decide between something like this
And more common covers that we could see in murdemod
There will be custom desing cut out but I can't decide which way to go with it
Silverstone TJ07
This build log will start in about 8 weeks, I started working in sketchup with desing for the case, looking for covers that I would like to have and I can say that 99% of desings are ready. There will be acrylic and barrow fittings with no fill ports so image the lenght of the tube
There is not going to be x99 tri sli 64gb build. I'm using my old hardware which is:
CPU - i5 2500k / EK Supremacy Clean CSQ
GPU - Asus GTX670 DC2 / EK GTX 670 Plexi (polished)(this probably will be swapped for 970 strix since block is compatible)
SOUND - Xonar D2X
RAM - 2x4GB Kingston HyperX 1600mhz
MOBO - Biostar TP67XE -> replaced with GB Z77X UP7
SSD - Samsung 128GB + 2TB External HDD
PSU - Super Flower 650W Golden Green
Radiator - HW Labs SR1 560mm -> replaced with XSPC RX 480
Pump - Alphacool MCP655 PWM / EK D5 Plexi Top (Polished)
Res - XSPC Photon 170
As I mentioned the desing of the loop is ready and this is how it looks. Originally there was supposed to be 2 photons but I decided It would be to crammed in there and now there is only one.
Top window will be slighlty modified version of this
On ther other hand I have a big headache with front cover and will need Your input on which one should I choose.
Can't decide between something like this
And more common covers that we could see in murdemod
There will be custom desing cut out but I can't decide which way to go with it
Thanks people Nice to see some input
As far as it goes for the front cover. The logo has been chosen yesterday and this is how the front will look like. Found it when I was googling and I love it. Modified SS logo will go also on my fans and ssd
Can't decide which coolant should I choose. Aurora 2 silver + orange dye or pastel orange
Nice to see some input As far as it goes for the front cover. The logo has been chosen yesterday and this is how the front will look like. Found it when I was googling and I love it. Modified SS logo will go also on my fans and ssd
Can't decide which coolant should I choose. Aurora 2 silver + orange dye or pastel orange
Last edited:
ThanksI can't quite put my finger on it, but something tells me you like orange.
Good luck with your build.
I liike red the most though http://i.imgur.com/JagqwPS.jpg?1
Originally I was about to use MSI Krait board but changing 1155 i5 for 1150 i5 would be waste of money so I found z77 board. They don't cost a lot and I don't need much juice to run CS
LoL yeah but im not using whole design . It will be modified, might not even use it at all.
The front cover and coolant color is the most problematic thing for me.
Another question for you guys.
What do You think about routing the tubes hotizontaly instead of vertically?
The front cover and coolant color is the most problematic thing for me.
Another question for you guys.
What do You think about routing the tubes hotizontaly instead of vertically?
Last edited:
1 inlet on the top + waterfall effect similar to what You can see on this short movie.
BTW it's anoter res made by same person
https://www.youtube.com/watch?v=kLt6LyJ2x7I
BTW it's anoter res made by same person
https://www.youtube.com/watch?v=kLt6LyJ2x7I
Very small update today. I'm getting there with moving my pc to TJ07. Everything is in the box, flushed and cleaned (no staining after 1 year of pastel using pastel). Due to black friday I made myself a gift
I'm disappointed with aquacoputer. I was counting on something more than aquabus cable. 4 thermal sensors and usb cable. For what they charge for it they give less than I had in Lamptron FC5V2. I suppose that's what happens when there is nothing else like that on the market
I'm disappointed with aquacoputer. I was counting on something more than aquabus cable. 4 thermal sensors and usb cable. For what they charge for it they give less than I had in Lamptron FC5V2. I suppose that's what happens when there is nothing else like that on the market
So I'm finally back and this small packet was already waiting for me
The packaging was very good, everything secured as it should be
Few seconds later
It's stunning. The quality is amazing, having in mind that it's been done by one person using simple tools. No scratches, no imperfections at all. I can't wait to see it in action. The waterfall effect should be amazing
The packaging was very good, everything secured as it should be
Few seconds later
It's stunning. The quality is amazing, having in mind that it's been done by one person using simple tools. No scratches, no imperfections at all. I can't wait to see it in action. The waterfall effect should be amazing
Just ordered 3 of these
** No hotlinked images **
http://image.ceneo.pl/data/products...120mm-wing-boost-plus-pwm-orange-lual-009.jpg
Decided to go with cable extensions for now instead of braiding PSU. Ordered black extensions for ATX and EPS, screws for radiators and some fan splitters
Hopefully I'll have my PC up and running before second half of January but it doesn't mean it will be done. There will be some details left like cover for I/O ports, new front cover (preparing desing now), backplate and maybe top window
** No hotlinked images **
http://image.ceneo.pl/data/products...120mm-wing-boost-plus-pwm-orange-lual-009.jpg
Decided to go with cable extensions for now instead of braiding PSU. Ordered black extensions for ATX and EPS, screws for radiators and some fan splitters
Hopefully I'll have my PC up and running before second half of January but it doesn't mean it will be done. There will be some details left like cover for I/O ports, new front cover (preparing desing now), backplate and maybe top window
