Thermaltake Symphony Mini

The Laing D5 Vario specs

Laing has just made the best pump better. The new D5-Vario boasts improved performance and quieter operations then the older D5.


The annoying whine of the original D4 has now been SILENCED in the D5-Vario model (as well as in the new D4-Basic)
Designed with a 50,000 hour mean time before failure (MTBF).
Uses a 4 pin standard computer molex connector
Use with 1/2" or 3/4" ID Tubing
Compact size allows installation almost anywhere in the case
Is powerful enought to supply multiple cooling block solutions (CPU/GPU/Chipsets)

Specifications:


Dimensions: (WxLxH) 90x90x90mm (without connections)
Motor type: ellectronically commuted ball motor
Rated voltage: 12 V DC direct current
Power input: 23 W
Admissible voltage area: 8 to 24 V
Delivery height: at 12V: 3,7m
max. Flow rate: 1500L/h
Delivery media: water, water-/glycol compounds
Max. System temperature: 60° C
Medium-affecting parts: stainless steel 1.4571,
PPS-GF40, EPDM O-ring sealings,
Aluminium oxide, hard carbon
Connections: 2x 1/2" tubing connection
 
The Laing D4 Basic specs

Laing has just made the best pump better. The new D4-Basic boasts improved performace and quieter operations then the older D5.


The annoying whine of the original D4 has now been SILENCED in the new D4-Basic
Designed with a 50,000 hour mean time before failure (MTBF).
Uses a 4 pin standard computer molex connector
Use with 1/2" or 3/4" ID Tubing
Compact size allows installation almost anywhere in the case
Is powerful enought to supply multiple cooling block solutions (CPU/GPU/Chipsets)>

Specifications:
Dimensions: (WxLxH) 90x90x90mm (without connections)
Motor type: ellectronically commuted ball motor
Rated voltage: 12 V DC direct current
Power input: 17 W
Admissible voltage area: 6 to 13,2 V
Delivery height: at 12V: 3,4m
max. Flow rate: 1400L/h
Delivery media: water, water-/glycol compounds
Max. System temperature: 60° C
Medium-affecting parts: stainless steel 1.4571,
PPS-GF40, EPDM O-ring sealings,
Aluminium oxide, hard carbon
Connections: 2x 1/2" outside thread
 
i've started looking into watercooling again due to the noise of 2 x delta fans getting on my wick

i want it for a conroe sys (E6600 that i plan to o/c).

i would like something decent that wont **** on my motherboard :p

would also like something nice like the zalman or the symphony (looks wise) but also not too awkward to put together

does that kinda thing exist?
 
to the O.P. dont bother. ive got thermaltake water cooling and its poo.



you can get yourself proffesional water cooling for under £80 if you shop around.

heres what ive got thats replacing the thermaltake next week.

nexxos XP block + half inch fittings £35
mag pump (450 liters an hour) £10
black ice pro radiator £10
resevoir £6
pipe and fittings £3.50

they were all second hand but they are all in good working order, look around on the bay and such places.
 
locutus12 said:
to the O.P. dont bother. ive got thermaltake water cooling and its poo.
you can get yourself proffesional water cooling for under £80 if you shop around.
heres what ive got thats replacing the thermaltake next week.
mag pump (450 liters an hour) £10
Click to expand...

But you were advised on some other forums that you posted on that that pump would not be up to the job :rolleyes:
Should get either D5 or DDC+ Ultrato provide better performance thru block.
;)
 
Could you tell me what tools/parts i need to have in order to install the kit? Also how often am going to have to maintain it with lubricants? danke
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom