Threaded Cables for Evga Supernova P2

InVitriol

InVitriol

InVitriol

Associate
Joined
18 Dec 2018
Posts
47
Location
Portrush
Hi, does anyone have any recommendations for threaded cables?

Its for an Evga Supernova P2 850w. There's no reviews of the Bitfenix extensions (nor compatibility specs), the Cablemod ones seem to have mixed reviews (too stiff), and Evga's own cables don't seem to be available in the Uk/Eu?

Thanks.
 
Extensions will fit any psu as they just extend the motherboard/GPU end of the cable. I have used Bitfenix ones in the past with no problems but most recently have been using Phanteks ones as I had a system theme colour change and the Phanteks sleeved cable extension kit (that's my kit but they come in several other colours) was too good value to pass up. I have had no problem with these either but I am now using my own cables that I made up as the bottom deck of my case was a mess with all the psu cables and their extensions. Personally I think that Cablemod's kit's are way overpriced. Their cable extensions are bad enough but their actual replacement cable kits are ridiculous and almost as much as the psu that they are for.
 
Mcnumpty2323 said:
Have used those phanteks extensions for
Couple of years now
No problem at all with longevity
Only thing I would say is the 24 pin could be a lot shorter
It really does add a lot more cable management issues
Click to expand...
Hmm. I'll have to take a look at my setup and have a think. Currently it's all hidden behind a plate lol
 
InVitriol said:
Hmm. I'll have to take a look at my setup and have a think. Currently it's all hidden behind a plate lol
Click to expand...
yeah that sounds exactly like
my style of cable management lol
cram it in and if the panel goes on its job done
but yeah the phanteks 24 pin is about 20 inches long
when all thats going to be visible usually
is a few inches
you can get short 24 pin extensions
maybe 6 inch dont remember exactly
and not sure if phanteks do those or not
 
The 24pin is the main reason I want to get something. I currently have an ugly/ messy cable.
My case has glass on both sides for some reason, which isn't ideal either, though half the mess is hidden behind said plate. I want to try and get around to tidying it up lol
Got ram to install that I RMA'd (thankfully GSkill has the lifetime warranty!) so nows the time I think! Though I might pick up the 5800x3d while i'm shopping haha.
 
Last edited:
Glass on rear panel not something I would like at all
Might be OK with a simple build
So not many cables
But since I have a full custom loop
And 5 sata ssds plus a load of other stuff
A glass rear panel would be
My worst nightmare
A quick look you can find 300mm ones
So a fair bit shorter than the 500mm phanteks one
But somewhere I know I saw 150mm ones
 
Yeah, good point. I hadn't noticed the size. 50cm is carzy big, then the original cable on top of that.
I'll have to have a look. At least I have an idea what i'm looking for now.
 
You must log in or register to reply here.
Back
Top Bottom