Tiny PC for Proxmox server / VMs

noxidjkram@hotm

noxidjkram@hotm

noxidjkram@hotm

Associate
Joined
29 Oct 2005
Posts
2,497
Location
Newcastle upon Toon
I'm looking to build a ProxMox server that will host a couple of VMs (mainly for isolated connectivity to work), plus maybe some other things that shouldn't tax it too much.

Been reading around "Tiny PC" Lenovo solutions that are pretty cheap second-hand.

Anyone have any experience of this sort of solution and any watchouts?

Cheers,
M
 
I’ve got a Topton N100 mini pc from Aliexpress, it was a barebones one so added 16GB Sodimm and m.2 drive.
It was about £120, there’s now one with a N150 chip for not much more.
You can get different specs of network, HDMI ports.

I run a Home Assistant VM and 3 LXC containers, it’s been on for nearly a year with no problems.
 
I have a few Lenovo Tiny. Mostly 6400T / 6500T 4c 4t but I think one might be 6100T 2c 4t.

Two are desktops running Linux and perform well.
I also have proxmox on one (32GB) with a few VM's for testing and runs fine.

These are similar performance to N100

Newer are obviously better but anything 8xxx up is still windows 11 compatible so not that cheap yet.
I paid about £40 for the base units and then memory. Note these only take SATA M.2 or 2.5 but the later ones are NVME if you need bandwidth.
 
Depending on your budget, check out the various mini Chinese PCs on Amazon such as Beelink. They’re good value for money, well specced and are certainly small
 
I'd suggest the Lenovo Mx20 line.... An M720, whilst aging a little, will give options on core count, upgrade options, pcie slot so you can add networking etc
 
Conan257 said:
I'd suggest the Lenovo Mx20 line.... An M720, whilst aging a little, will give options on core count, upgrade options, pcie slot so you can add networking etc
Click to expand...

Yup. That’s what I did. Well, on roids thanks to this:

github.com

GitHub - j4cbo/tiny5-m2-riser

Contribute to j4cbo/tiny5-m2-riser development by creating an account on GitHub.
github.com github.com

8700T, 32gb, 3x M2 drives and a dual 10Gbe NIC.
 
Conan257 said:
Worth noting that the m920 is needed for the extra m.2 drives I believe, m720 only does one out of the box.... Depressingly....
Click to expand...

Yep, that’s one of the strong points about that riser. Makes up for the shortfall on the 720. 4x on the 920 though. Storage up the wazoo.
 
I grabbed a couple of Optiplex 3040M's and put 250gb SSD's in them & 16gb memory. They were about £30 each.
I then use an old pi as a qDevice for quorum.
 
You must log in or register to reply here.
Back
Top Bottom