-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
Titan Fenrir Evo - MX3 or supplied grease?
- Thread starter jaysus
- Start date
Gah. Got the stock cooler off, reached for the fitting instructions for AM3 and I can't find them. AM2 and AM2+, and K8 yes, but not AM3.
Posting from phone now. Could someone tell me if the fitting is the same as one of the others? Tried going on the Titan website but my phone isn't agreeing with either flash or java. Alternatively could someone dig out a direct link to the correct fitting instructions for me please?
Posting from phone now. Could someone tell me if the fitting is the same as one of the others? Tried going on the Titan website but my phone isn't agreeing with either flash or java. Alternatively could someone dig out a direct link to the correct fitting instructions for me please?
Well that was an absolute cow of a job. I have the dexterity of the jolly green giant and it really showed. It's taken me two and a half hours total. The majority of that was dealing with other little jobs as they came up - everything was made more difficult because of how much room the Fenrir takes up. Beast of a thing it is.
That said fitting the thing was a nightmare - I used the 'pea' approach with the MX-3 but I couldn't get the heatsink to stay still whilst I slotted and screwed the bracket into place. It felt like I needed an extra hand - maybe I should draft the missus in to help. As a consequence I can't help but think that the MX-3 hasn't been properly applied. Oh, and in the pic below - I managed to knock the blue thing in the middle with Gigabyte written on top of it. I'm not sure what it is but it feels fairly loose now (though not as though it's going to come off.
My idle temps (in a warm house thats had heating on all day, and with case near a radiator) is around 27 degrees, which isn't much less than normal (about 4 degrees less.) That being said I've had Prime95 running for about 5 minutes and under load it seems to settle around 48-49 (this is all with voltages at whatever is their default.)
As requested, a couple of pic's:
That said fitting the thing was a nightmare - I used the 'pea' approach with the MX-3 but I couldn't get the heatsink to stay still whilst I slotted and screwed the bracket into place. It felt like I needed an extra hand - maybe I should draft the missus in to help. As a consequence I can't help but think that the MX-3 hasn't been properly applied. Oh, and in the pic below - I managed to knock the blue thing in the middle with Gigabyte written on top of it. I'm not sure what it is but it feels fairly loose now (though not as though it's going to come off.
My idle temps (in a warm house thats had heating on all day, and with case near a radiator) is around 27 degrees, which isn't much less than normal (about 4 degrees less.) That being said I've had Prime95 running for about 5 minutes and under load it seems to settle around 48-49 (this is all with voltages at whatever is their default.)
As requested, a couple of pic's:
Last edited:
Am going to stick the fan the other way up so it's blowing through the heat sink and straight into a top case exhaust fan. Will reseat the whole thing on Saturday or Sunday and will fill the gaps then. Will get some cling film and try that approach for applying the MX-3. Not rushing as a) It's running fine after an overnight stress test with a gentle (multiplier only) overclock and b) my new GPU has just turned up and I'm itching to try it out.