to all vx pc4000 owners please help or anyone who can help me

[ace1981]

i bought some vx while it was being rma'd so i could use the pc


i rma'd the vx and received my vx this morning and installed it with current 1gb vx at 2.2.2.8 3.3v 2t would boot but before windows logo appears it restarts

those timing are corect yet wont work with 2 packs not had no prob with 1 pack

so i set pc back to default[cpu and ddr] and works so what should i do to get those setting again of 2.2.2.8 3.3 i try'd 3.4v same thing i dont mind 2 t if i can get it to work

could it be too much strain of cpu memory controller?:?:

 

[Justintime]

when you say 2 packs, you mean 4 modules? If so, then you may have to relax the timings or the FSB, as 4 sticks may be too much for the memory controller on your cpu to handle, especially at high speed and low latencies, adding voltage prolly won't help.

 

[ace1981]

yeah 4 x512

fix it all done thanks to ocz who help me and setting becouse i have 4 stick i need to set settings manual so he pointed me to page where the setting are and now it all working even though ive lost 1t ahh well

here what setting i did

In Genie Bios
250
4
16 16
9
100
disable
1.450v
1.450V
Above VID 110%
1.30v
1.60v
3.0V (you will have to raise this to get higher speeds) i raise it 3.3v

Dram Config
200 (this will work on Venice or San Diego cores..166 for other cores)
disable
2.0
02
08
02
10
16
02
03
02
03
1168, 1560, or 3120
auto
enabled
auto
0
Level 8
level 2
8ns
normal
6ns
256
disable
16
04
disable