Uninstalled and Re-installed new AMD Drivers, GPU no longer flashed??

[xTommy92]

Hi Guys,

It has been awhile since I have last flashed a GPU, the last time I did this was when I bought my second 7950. I have a MSI 7950 on the top slot with a Ice-Q Boost underneath it. Now the problem I had before was that the MSI (880Mhz/1.094v) ran different clocks to the Ice-Q Boost (925Mhz/1175v) and the Ice-Q is a boost card which the MSI is not.

I had flashed both cards so they were running at 880Mhz/1.094v and OC them from there. I cannot find the old thread that I used to do this and do not understand why the Ice-Q has gone back to default. I use Driver Fusion to wipe any remaining AMD files after the CCC Uninstaller.

Should I re-flash or is there another reason why it is doing this?

Thankyou,
Tom

 

[xTommy92]

http://www.overclockers.co.uk/showproduct.php?prodid=BG-360-GI

Just spotted this and it is really tempting, plus I could just sell my 7950's!

Tom

 

[Woodsta888]

You havent knocked the dual BIOS switch into the other position if you used one have you?

 

[xTommy92]

You havent knocked the dual BIOS switch into the other position if you used one have you?

No, after installing the new AMD drivers and re-installing Afterburner, when I switch between the two cards at stock they have different speeds. It is not until I apply a Overclock profile that it changes, when before the Ice-Q had the same speeds and voltage as the MSI at stock.

Tom

 

[tommybhoy]

http://forums.overclockers.co.uk/showthread.php?t=18509458

'Method 2' has a custom bios/flashing guide, but before you try that, go into AB directory and remove 'profiles' folder, then uninstall/re-install AB first and then check your default clocks.

 

[xTommy92]

http://forums.overclockers.co.uk/showthread.php?t=18509458

'Method 2' has a custom bios/flashing guide, but before you try that, go into AB directory and remove 'profiles' folder, then uninstall/re-install AB first and then check your default clocks.

Deleted the Profiles folder, uninstalled and re-installed AB. After restarting I checked both cards and the clocks and voltage are different to one another. The MSI is 880Mhz/1.094v and the IceQ is 925Mhz/1.175v.
Does this mean I should redo the bios flash?

Tom