Update to my X299 custom loop.

[jammir]

Re-did the runs from the res to the gpu and the in on the res, added a second water temp sensor and changed to Mayhems
Pastel. I think ill leave it there still could have done some more work on the runs but ill try different way on my next upcomming TR4 build.

Anyway let me know if there is something I should have done different? This has been a expensive first dive into custom water loop, did not think it would add up in cost so fast but loved the whole experience and ready for my next project.

Before

After

 

[Mcthommo]

very clean build- love it

 

[michael27]

looks great what's the spec and CPU/GPU temps ?

 

[jammir]

7900x
GTX 1080 seahawk
32gb 3200mhz
960 pro 512gb
2x 850 pro 1tb
Ek se360, se280, se140

7900x @ 4.9GHz full load 68c 1080 2020mhz full load 55c fans at 900rpm, coolent temps in 39c and out 43c.

 

[michael27]

Great temps on the CPU but i would assume that your GPU temps would be a bit lower to mid 40c running all those radiators. for comparison I'm running 1080 TI on a XSPC RX 360 rad/fans at 1000rpm and my GPU temps on load is 45c.

 

[LuckyBenski]

The colours and the lines in this build are KILLER! Top work mate.

 

[jammir]

Great temps on the CPU but i would assume that your GPU temps would be a bit lower to mid 40c running all those radiators. for comparison I'm running 1080 TI on a XSPC RX 360 rad/fans at 1000rpm and my GPU temps on load is 45c.

Not sure why the temps are at those numbers the loop still has some air in it, the gpu on another loop with a 6700k and 360 40mm rad was in the low 40's.

The colours and the lines in this build are KILLER! Top work mate.

Thanks mate.