Upgrade Help. Its been a while....

All parts arrived at the weekend. Had to purchase from a few different places to get what I needed on time.
OC managed to get the case to me on Saturday AM, which was great.

I have put some pictures below.
Few observations from the build:

Mobo is nice. The 1st M2 slot has a heatsink with thermal pads pre applied. The M2 screw is actually a quick release clip. Nice feature.
The tension on the CPU socket clip was unnerving. Don`t remember it being as firm on previous builds.
The Noctua cooler was a piece of cake. Saw a few people on line moaning that you have to assemble the bracket. I had no issues.
Be-Quiet case is nice. Not quite up to the standards of my aging Antec P182. TBF, The Antec does weigh the same as a small car. :D
The pre supplied Be-Quiet fans seem noisy. Especially the 140mm at the front. I need to investigate.

Windows installed in around 10 minutes from USB. No issues at all.
System is very quiet at idle, and still quiet whilst running 3D Mark. Score was 11095. So in the ballpark for stock speeds.
I wanted a decent system, but not too much noise as its in the bedroom. Well chuffed.

6TlpkKM.jpg
Y6bislp.jpg
8Lob31K.jpg
Up8JsSq.jpg
dPFZsqE.jpg
 
I would add another fan to the front of the case.
I did think of this. The fans installed are currently connected to the 3 position switch on the case to control speeds, so I have no idea how fast they are turning.
Speed 2 seems the sweet spot for me as regards noise. I will have a look at some fan options.
 
Back
Top Bottom