Upgrade time

hux · 2 Jan 2016 at 17:44

Not willy waving, but can any of you help me with anything with this order?

By that I meanknown issues, or things that might crop up, case will be my PC50R ArmourSuit.

http://www.lian-li.com/en/dt_portfolio/armorsuit-pc-p50r/

I've heard that I need to use W10 to install the m.2 ssd?
And that I need to press f2 than f7 and select uefi in the bios boot up?

Inno3D GeForce GTX 980Ti Hybrid Black Edition 6144MB GDDR5
Intel i7-5820K 3.30GHz (Haswell-E) Socket LGA2011-V3 Processor
Asus X99 Deluxe/USB3.1 Intel X99 (Socket 2011) DDR4 ATX Motherboard
Corsair Hydro H100i GTX 240mm High Performance Liquid CPU Cooler
Corsair - Vengeance 16GB (4x4GB) DDR4 PC4-25600C16 3200MHz Quad Channel Kit - Black
Samsung 950 Pro 512GB M.2 PCI-e 3.0 x 4 NVMe Solid State Drive

mickyflinn · 2 Jan 2016 at 19:46

Where are you going to mount the water cooler as the top fans are 140mm so you need the Hydro H110i GT 280mm as the 240mm wont fit ?

hux · 2 Jan 2016 at 22:17

mickyflinn said:
Where are you going to mount the water cooler as the top fans are 140mm so you need the Hydro H110i GT 280mm as the 240mm wont fit ?

The top fans sit in their own section, unless I fancy hacking off the frame under them.
I plan on mounting the rad directly under those fans, hoping for a rudimentary push/pull of course.

mickyflinn · 2 Jan 2016 at 22:25

hux said:
The top fans sit in their own section, unless I fancy hacking off the frame under them.
I plan on mounting the rad directly under those fans, hoping for a rudimentary push/pull of course.

I would Make sure you get the Hydro H110i GT 280mm as they 140mm fans not the 240 as you speced.

hux · 4 Jan 2016 at 07:55

mickyflinn said:
I would Make sure you get the Hydro H110i GT 280mm as they 140mm fans not the 240 as you speced.

The 110i might be too big for the inside as I have rails that the case panels go on.
Plus I can fit it to the front should I need to, I'll be buggered there if I have the 280?