Upgraded CPU. Reaches 100C within 2 seconds fan won't go full speed

Soldato
Joined
19 Feb 2007
Posts
3,709
Got a used I7 4790k to replace an i5 4690k , notices in game and benchmarking temps go to 100c near instantly so i reseated fan, same thing. Went into BIOS and enabled fan to be full at all times, still fan ( stock i5 cooler ) wont rev up past 2100RPM.

with i5 i had no probs with temps , load 65-70C.

I am using the i5 stock cooler with the i7 BTW.
 
Yes it is, but it was great with i5, and before i get another cooler i want to rule out defective die temp sensor etc. my CPU fan wont go full speed even at 100c
 
No speeds don't change with fan at all stays 2100RPM. When i bench and leave it for a bit putting my fingers on the heatsink isn't that hot.

It gets 100C in 2 seconds.

Temps go down very fast yes.

Tried SpeedFAN, can't even manually alter fan speed. Just ON/OFF Software controlled or Smart guardian.
 
Just to update , i got the Cooler Master Hyper TX3 EVO. today and everything is spiffy now, i undervolted the I7 from 1.2 to 1.15v and has been stable all day with load temps around 69C - 73C. big difference from 100C last night.

Thanks for all your help.
 
Still seems a bit hot
I had a 4790k a while back and granted i was cooling with a dark rock2 it ran at 4.7 all cores 1.27volts and idled at about 40oC +- ish depending on room temps


Well right now it's idling around 32C , i was playing BF2 last night 64 players and sometimes it dipped into the high 60's , as you said , ambient temps play a big part too
 
Result although it's still hot. Might be worth de-lidding if adventurous. Depends on risk vs reward to you. Can always look on the bright side though, at least your room will be warm this winter.

I was looking at some videos on delidding, seems quite strait forward , knowing me though, i'd **** it right up
 
Just lowered my Vcore on the i7 from 1.15 to 1.12 stable and under 100% load temps dropped to 66C from 70C. I wonder if i can go lower?
 
Back
Top Bottom