• Notice regarding image hosts and attachments. See here.

USB Splitter Cable?

Associate
Joined
15 Nov 2011
Posts
1,237
Hi all, I am hoping someone can help me.

Basically I have a case with 6 front usb ports, and a motherboard with only 3 USB headers. Is there such a thing as a splitter cable so that I could connect 2 cables to a single header? Alternatively is there any sort of adapter that would work from a molex connector?

On a related note is there such a thing as an extension cable for these? because the internal usb header cables running from my front panel to my motherboard are a bit short

I have googled this but searching for USB Splitter and the like just links me to USB hubs etc.

Thanks in advance!
 
I have a very old case and annoyingly it has one cable per port, not sure why but nothing i seem to be able to do about it. That internal adapter cable looks promising. I am using all of my PCI slots so an internal card wont suit unfortunately.

Thanks for all the help!
 
Surveyor, you are correct, my case only has usb 2 but I thought usb 3 was backwards compatible? The headers on the motherboard are like that but the cables have 10-1 so 9 'pins' not 5 as shown. I guess that could mean each cable is for 2 ports? I will double check that but I am sure that last I checked, with only two cables plugged in I only had 2 active USB ports.

Thanks for all the advice :)
 
I think you may be right about me getting confused, I will have to have another look. On recollection I may only have 3 USB cables running from the front panel.. To explain better:

I have just changed my motherboard. With the last board, I 'think' I had 2 usb headers connected and I had 2 front usb ports active. With the new board I have connected 2 usb headers and just assumed that I have 4 more tied up in there somewhere due to the previous setup. I definitely have at least 1 more that I have seen though. I could be remembering wrong though and only have had 1 USB header plugged in on my old board. (not all of the cables would reach)

I will check tonight, if it now has 4 active front usb ports then I would put it down to being a numpty and assuming things without looking properly.

Thanks
 
My board is the one you pictured but it actually has 3 USB headers (there is one further up towards the PCI slots, a little off centre). You are correct about the cables, I have jumped to conclusions I guess, still it is something I have learned for the future.

I still need an extension because the third cable wont reach the third header. The NZXT thing mentioned earlier is an expansion card as opposed to an extension cable, so not what I am after. Any Suggestions?
 
Back
Top Bottom