USB trouble on my Shuttle.... Please Help!

Soldato
Joined
5 Jun 2005
Posts
20,906
Location
Southampton
Hi guys,

Having trouble with my USB setup on my SN41G2 shuttle, it is fully USB 2, but I’m having hassles, sometimes I get a message when I plug in my pen drive saying “this drive can perform faster” which leads me to believe it’s running on USB1 ?

The main issue is though, when I plug my phone or more importantly my IPOD photo, it comes up with drive not recognised. I have tried reinstalling the NVIDIA neforce2 drivers, but still no joy, I have a PCI USB2 card in the back of my shuttles, and this seems to work sometimes. These issues are not always present but lately they seem worse.

Just wondering if anyone has any ideas? Do I need another driver?
 
Sorry to hear of your troubles mate, it’s a right royal pain! I have not had this issue before and everything used to work fine, so I guess something has ‘knocked the driver out’ I thinking of backing up everything on my USB drive and formatting and starting over installing win XPSP2 straight on, I reckon this may be my best bet. As I know when I last done a clean install I had no issues at all. I don’t believe it has packed up.

I also have a USB2 PCI card and that has issues, I have tried removing the card and drivers but no joy either way.
 
cokecan72 said:
as long as you have SP1 or SP2 installed all you have to do is go to device manager (right click my computer - properties - hardware tab), go down to the USB stuff and reinstall the driver (i think it was) or if theres any yellow exclamation marks, install the drivers for them and it SHOULD install the USB 2 drivers.

this has happened everytime i format on both my shuttles ive had

if still nothing then check that USB is enabled in the bios as you can limit it to usb 1.1 :)


still havoing trouble, any large powered devices, like usb2 hard drives or ipods, just don't work!
 
Back
Top Bottom