I recently purchased an EK Y splitter to pop a drain in when I do my build later this month. Now looking at others builds I noticed no one uses this type of splitter and I am wondering whether to swap for the 'dice' type splitter. Has anyone used the Y type in their build? any opinions?
Using a Y type splitter for drain.
- Thread starter dazzlaa
- Start date
Thanks for the reply, think I was planning on doing things slightly different. Over the course of the day I have been trying to plan my best route and I believe that I should do things like this : My Pump/res combo lies at the lower right of my case, in front of my 360 rad. The outlet of my 360 rad will be at the top and will feed into the inlet of my Pump/res (EK Xres 140). At the inlet I plan to have the Y splitter set up there with one feed as a drain. Space is limited so I don't believe I could set this up on the slightly lower outet port. Hopefully this will work.
Managed to manufacture a working product from what I had last night. So the idea is , 45 facing downwards for the drain, a 45 degree upwards with a bend going to the front radiator ports. All attached to the Pump/Res Inlet port.
Should do the trick!!?
Should do the trick!!?
Last edited:
