V2000b & WC..help

Permabanned
Joined
14 Jul 2005
Posts
2,051
Location
Portishead, Bristol
Just bought one for £130 posted off a forum.

I got 2 Pa120.3 rads.... where is the bets place to mount these??

Only need to do a single for now but top or bottom?

Also anyone up for doing the rad holes and fan moutns for me? I don't have tool skills or time sadly
 
Umm thats a cool pic there and differnt.

How ever i don't bleive there much air flow over the unit.

I'm also wanting a silent rig so will not need the 3.5 bays as i'm going to suspend my HD's on that eleastic stuff

i got the idea of doing the CPU rad up top and the gfx one at the bottom, top draws air into the case, bottom draws air as well, possibly a front mounted rad to cool my nb drawing air in and the exhaust on the back drawing it out

What other mods are there
 
That a V2000B case?? ^

One rad is going up the top no questions asked about it

Seconds rad will go at base where HD's would go but that HD caddy thing will come out as HD's are being hung in the 5.1/4'' bays

I guess i could mount both rads on the sides of the door pannles at the base maybe, one ether side, both darwing in air so the bototm of the case would be the hotest with

1 cpu rad
1 gfx rad
1 NB rad
PSU drawing it all out with a front fan drawing in the cool air

How wide is the case?
 
Last edited:
Umm i'd say have your rad fans sucking air outta the case. Hot air rises so if you have the following

Rear exhuast fan blowing into case (thus would give some direct cooling to mobo)

Rad fans sucking the air out the case (fornt of cas eis a meash so cool air will be drwan in to replace it thus adding you mobo cooling)

The bottom rad will darw air into the case and the top draw it out of the case. The divered in the case i think will get blocked so it's air tight and the'll be two sections then for both rads and no conflicting heat transfers...we'll see though when she arrives
 
Ones cpu ones GFX, if you wnat decent cooling and can;t do phase due to hardwear then go 2nd best thus

2 inderpenat lopps, fact it'll be 3 as NB shall be done too

I can get a decent car and fund it for a month easy and have forced air cooling for the price and effort to get said case to the uk dude
 
This things has d
had 3 Mach II's on her all at once

1 CPU
1 Nb
1 GFX

Can we get it clear that 1 rad is for cpu, other rad is gfx

A 4.2GHZ (full 1ghz overclock form stock) kickes out a lot of heat, current setup is hititng 40c full loaded with 13 hours of testing

NB hits 50c 24/7

I just want to use the parts i got here and show off the fact i can have 3 loops in there and it look the sex as per yours has withthe 2 loops and the 2 differnt dyes in there as per what i shall be doing mate

Also my Yonah (retail) might go in here and i've a Conroe ES on it's way shortly to play with and latter a proper retail Conroe
 
Back
Top Bottom