VDIMM Voltage

JrFowler · 30 Dec 2006 at 16:45

What should I set my VDIMM voltage to with OCZ 2gb Platinum Revision ram too? I followed the guide to setting up the DS3 motherbaord and windows wouldnt start... I restored all the voltages to normal and bingo, it all worked ok..

Im guessing it was the VDIMM voltage that threw it..

Jokester · 30 Dec 2006 at 16:47

What's the full name?

Jokester

JrFowler · 30 Dec 2006 at 16:49

Jokester said:
What's the full name?

Jokester

Of the RAM?

Is it right for in the BIOS for **** System Voltage NOT Optimized ****

to appear everytime u change something?

Jokester · 30 Dec 2006 at 16:50

Yep of the RAM.

Jokester

JrFowler · 30 Dec 2006 at 16:54

Jokester said:
Yep of the RAM.

Jokester

OCZ 2GB (2 x 1GB) PC2-6400 Dual Channel Platinum Revision 2 XTC Series DDR2

Im very new to this, is it normal for the computer to shut down and restart each time u save and exit the bios also?

:confused:

Jokester · 30 Dec 2006 at 16:56

800MHz DDR2
CL 4-4-4-15
(CAS-TRCD-TRP-TRAS)
Available in 1024MB modules and 2GB (2x1024MB) Dual Channel Optimized Kits
Unbuffered
Platinum Mirrored XTC Heatspreader*
Lifetime Warranty
1.9 - 2.1 Volts
240 Pin DIMM

And yeah, when you save the BIOS settings the PC will restart to load them.

Jokester

JrFowler · 30 Dec 2006 at 16:59

Jokester said:
And yeah, when you save the BIOS settings the PC will restart to load them.

Jokester

So I should be moving it up to +.02v then?

Should I worried about this whole optimized voltage settings in the BIOS, or is that to worry fiddlers..

:confused:

Logic Zero · 30 Dec 2006 at 17:21

I wouldn't worry about it, my bios says the same thing and my pc is stable

Sime · 30 Dec 2006 at 18:29

I was worrying about the Voltage Optomized thing aswell

Cob · 30 Dec 2006 at 21:55

The Gigabyte motherboards say it to scare n00bs. But pay no attention to it.