Vertical gpu mount

[sxbxe]

Hi, I would like to get a vertical gpu mount. I understand that pcie is backwards compatible and I am going to get a pcie 3.0 riser cable for a pcie 4 gpu - the sapphire rx 7700xt in white. Is this mount compatible with the mobo I have aswell? My mobo:https://www.awd-it.co.uk/asus-prime...9bBRbVddk-VP80WYpF75xUxMNZkGdB1QaAky5EALw_wcB the mount I’m looking at: https://www.awd-it.co.uk/phanteks-v...flatline-220mm-pci-e-x16-riser-cable-kit.html also is the kit dodgy or fine

 

[LuckyBenski]

You will want to remove those competitor links before a mod does

Compatibility isn't really about the motherboard (all PCIe slots should be the same fitting), it's down to whether that vertical bracket fits your case. Do you have a Phanteks case?

 

[Tetras]

So long as you can turn the graphics lanes from 4.0 to 3.0 in the BIOS you should be fine, if you don't then a PCI-E 3.0 riser might be unstable.

 

[sxbxe]

You will want to remove those competitor links before a mod does

Compatibility isn't really about the motherboard (all PCIe slots should be the same fitting), it's down to whether that vertical bracket fits your case. Do you have a Phanteks case?

I have a 011 d knockoff this one- (again srry they don’t sell at ocuk so competitor link again) - https://www.amazon.co.uk/iONZ-KZ-Z-...d=1720976288&sprefix=ionz+kz-z,aps,124&sr=8-1

 

[LuckyBenski]

In that case I'm not sure the bracket will work for you - if you look at where the display cables would plug into the card, they will be blocked by the horizontal metal slats on the case. Unless the bracket is set back a bit or you cut those slats off, they will foul the card's backplate.