Very quick overclock check.

[Princey]

I've just finished putting my rig together and thought I'd have a stab at 4.0Ghz, this was on a P55-UD5 with XMS3 Ram. Idles at around 25oC and tops out at 60oC after 8hrs of hyperPi. I see people running much higher voltages than me, am I right in thinking that aslong as it's stable then a lower voltage is better? I have enabled load line calibration to compensate for vDroop.

 

[Princey]

Sorry that is load, it was running hyperPi at 32M decimal places. It drops the multi to around 9x I think giving me 1800Mhz and a vcore of 1.136.