• Notice regarding image hosts and attachments. See here.

VRM Heatsinks

Associate
Joined
19 May 2004
Posts
1,072
Location
Horsham, West Sussex
I have just purchased a Gigabyte 970A DS3 for a budget upgrade.

I was hoping to keep my upgrade to around the £200 (CPU, MoBo, RAM and HDD) but am already over-budget so not too keen on swapping it for a much more expensive MoBo.

What has taken me by surprise is that there is no VRM heatsink on the 4+1 phase.

Now I look I see this is quite common amongst the cheaper boards - I have just never given it any thought before.

CPU is AMD FX-6300

To be honest, I wasn't planning on overclocking it, maybe a mild increase - but in the past I've always played around but dropped it back to stock because in real terms I didn't really notice the difference.

Even so I am uncomfortable about not having heatsinks on the VRM so am considering my options

1 - Leave it alone, I'm fussing over nothing

2 - Stick some RAM heatsinks on them - like these

http://www.overclockers.co.uk/showpr...odid=HS-087-AK

3 - Return the board and replace with one with VRM cooling. Whilst I appreciate this is the best solution, and I may well have ordered a better board had I spotted this earlier, I'm less inclined now because of the hassle and cost of the return.

BTW - the MoBo spec says the board has TDP of 140W
The new FX-6350 (which I imagine is a selected overclocked 6300) runs at 125W TDP

What do you think?

Cheers,

Nigel
 
Wouldn't know if it were an issue without running the system, and then Option 3 would not be available.

I would only contemplate Option 3 if I were to return the MoBo unopened.

Cheers,

Nigel
 
What about this board

http://www.************/products/as...r3-sata-iii-6gb-s-sata-raid-pcie-20-(x16)-atx

He seems to have a hefty VRM heatsink.

I am trying to watch the budget though - my original budget was as close as I could get to £200.

I'm currently at £244.

Moving to this ASUS board would take me to £278.

I know it's not much but it is pushing further away from my original goal.

As I siad, I doubt I will overclock, but if I did my target would be 3.9GHz (to match the FX-6350).

Cheers,

Nigel
 
Thanks for the advice.

I've just posted a specific question on the MoBo forum.

Essentially I'm now thinking

1 - Keep the DS3
2 - Asus 59A97
3 - Gigabyte 970A UD3

I guess I'm torn between option 1 or 3.

3 is a very safe option with 8+2 VRM and heatsink.

But part of me thinks is that as the DS3 claims to support to new FX6350 then it should be able to handle an overclocked 6300 to the same level.

Cheers,

Nigel
 
Thanks, that is really useful info.

I was only planning on going upto 3.9GHz just a multiplier change and hoepfully no voltage increase i.e. match the FX-6350.

That should put power at 125W in line with the FX-6350.

The VRM on the DS3 is spec'ed at 140W so should be okay.

So on paper I'm thinking the DS3 should be fine, but my nervousness is saying change it for a UD3.

Cheers,

Nigel
 
Thanks,

I've arranged to swap it out for a Gigabyte 970A UD3.

Even though I'm sure the DS3 will do what I need, the comfort of mind of a better board is worth it.

Cheers,

Nigel
 
Back
Top Bottom