w810i o2 P&G gprs setting, anyone know them?

Soulja · 27 May 2006 at 14:41

i've had a look round and i cant find any that work, keep getting con.failure check settings

anyone got there w810i working on o2 P&G?

Scottland · 27 May 2006 at 14:47

Try these:

Code:

Session Type	Continuous/Permanent
Security	Off
Gateway Address	
Port number	9201
DNS Address	193.113.200.200 / 193.113.200.201
Authentication	Normal
Access Point Name mobile.o2.co.uk
PAYG payandgo.o2.co.uk *
Mail server (SMTP) smtp.o2.co.uk
PAYG payandgo.o2.co.uk
Mail server (POP3)	mail.o2.co.uk
Username mobileweb
PAYG payandgo
Password password
PAYG payandgo
Home Page http://pda.o2.co.uk/

Soulja · 27 May 2006 at 15:07

doesn't work :confused:

Scottland · 27 May 2006 at 15:10

What GRPS site are you trying to get to?

Soulja · 27 May 2006 at 15:21

just normal startup o2 site

Scottland · 27 May 2006 at 15:29

I've just noticed the formatting was screwed from when I pasted the details in, I've edited now, check them against what you're using.

Soulja · 27 May 2006 at 15:48

what about ip address?

Scottland · 27 May 2006 at 16:02

My phone (K750) shows this as "...", so I'm not sure you need one?

Soulja · 27 May 2006 at 16:08

still not working

kibblerok · 27 May 2006 at 19:12

http://www.o2.co.uk/services/ota4/select

Soulja · 27 May 2006 at 20:21

^my phones not on there

Scottland said:
I've just noticed the formatting was screwed from when I pasted the details in, I've edited now, check them against what you're using.

well its not saying con.failed anymore, the main site just doesnt load up

gib786 · 27 May 2006 at 20:38

change the homepage to wap.o2.co.uk

Soulja · 27 May 2006 at 20:39

isn't that for contract phones though?

gib786 · 27 May 2006 at 21:03

nope, works on my pay as you go sim

Soulja · 27 May 2006 at 21:08

tried it and still doesn't work

Soulja · 27 May 2006 at 23:34

got it working now, thanks for the help

scratch · 28 May 2006 at 11:26

Soulja said:
got it working now, thanks for the help

Would you care to explain what you did to get it working then in case other people are having the same problem.

Cheers

Andy

Soulja · 28 May 2006 at 12:43

Get the settings from SE website, after they send them to you go into data comm. and enter your username as payandgo and password as password

scratch · 28 May 2006 at 12:52

Soulja said:
Get the settings from SE website, after they send them to you go into data comm. and enter your username as payandgo and password as password

Thanks dude.

Andy