Soldato
- Joined
- 8 Sep 2003
- Posts
- 23,173
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
Hi guys
We have updated the Aerocool to include the full range with designs and features to suit all types of people.
Aerocool X-Predator Ultimate Gaming Case - Black @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - Black/Orange @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - Black/Green @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - White @ £118.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £118.99 inc VAT.
ORDER NOW
Aerocool Qs-202 Midi Tower Case - Black @ £39.98 inc VAT
Aerocool is proud to announce the new mini-tower model Qs-202 under the compact case PGS-Q Series (Compact series - Blue Label). Even though Qs-202 is classified under the compact case seriers, but it was designed in a "BIG" way that its versatility,expandability, transportability, protection and performance is no les than most mid-towers in the market today.
The Qs-202 case also delivers optimal air flow and supports longer high end VGA cards up to 390mm (center HDD cage removed). The mini-tower case can support 1 x 14cm fans in front (included(, 1 x 12cm fan in the rear (included), 1 x 12/14cm fan on the side panel (optional) and 1 x 8/12/14cm fan on the top panel. It's mesh front panel also helps to maximize air-intake.
If you are looking for a gaming case with size in mind but do not want to trade off with its internal expandability and versatility then the Qs-202 is the case you MUST NOT miss out on.
- High performance "Mini-Tower" for gamers and enthusiast.
- Solidly constructed chassis – 0.6mm SECC Japanese Steel.
- ALL BLACK interior and "blue" MB plate for an unique touch!
- Supports longer high-end VGA cards up to 390 mm(with HDD cage removed).
- Supports 2 x 5 1/4" , 1 x 3.5"(with adaptor), 1 x 2.5"(with HDD tray) and maximum 6 x 3.5" HDDs (internal)
- 90 degree retractable HDD bracket in “blue” color
- "Easy-install" screw-less kits for the 5 1/4" devices
- Cable management holes are pre-drilled with rubber protection
- CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly
- Can install 1x12/14cm fan at side panel (optional) / 1x12cm at rear (included) / 1x14cm fan in front (included) / and 1x8/12/14cm fan at top panel (optional)
- Bottom PSU position enables PSUs to suck in cold air for better cooling with washable dust filter.
- Water-cooling holes are pre-drilled to support water-cooling systems
- 2 x USB/ Audio+Mic (AC’97 + HD audio) are easily accessible from the top panel.
Only £39.98 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - White @ £69.98 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant white colour. Only the PCI covers, cable management protection rubber, HDD trays and the screw-less kits remain black in colour, cementing its unique look.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £69.98 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - Black/Red @ £59.99 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant black and red colour.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £59.99 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - Black/Blue @ £69.98 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant black and blue colour.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £69.98 inc VAT.
ORDER NOW
Aerocool Strike-X Advance Midi Tower Case - Black @ £54.98 inc VAT
AeroCool offers the Strike X-series is a whole range of aggressively styled gaming hardware that is already clearly intended as a visual warning signal.
The X-Strike Advance Tower is the perfect base for function and style to bring under one umbrella. For in addition to the design, the mid-tower has a practical design. The second key design component is the colour, which offers a black finish and red lights as an excellent contrast. This is guaranteed in addition to the two bright LED fan in the front frame elements. The I/O panel in the lid holds the audio ports, and the USB 2.0 and USB 3.0 ports.
The black Mainboard tray is not only eye-catching, but also is practical. First, it is comparable in length and has space for large graphics cards and various brackets for cable attachment. On the other hand, the frame has a cutout for easy installation of a CPU backplate.
- Dimensions: 195 x 472 x 505 mm (W x H x D)
- Material: Steel
- Weight: 7kg
- Motherboard Support: ATX, Micro ATX
- Side Cooling: 1x 120mm (20.9 dB(A) 1200RPM Red LED)
- Rear Cooling: 1x 120mm (20.9 dB (A), 1.200 RPM Red LED)
- Top Cooling: 1x 140mm (25 dB(A), 1200RPM Red LED)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- Drive Bays: 9 x 5.25 (external, max) / 1 x 3.5 inches (external, in the 5.25-inch slot) / 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 3.0 / 1x USB 2.0 / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £54.98 inc VAT.
ORDER NOW
Aerocool Strike-X Advance Midi Tower Case- Red/Black @ £44.99 inc VAT
AeroCool offers the Strike X-series is a whole range of aggressively styled gaming hardware that is already clearly intended as a visual warning signal.
The X-Strike Advance Tower is the perfect base for function and style to bring under one umbrella. For in addition to the design, the mid-tower has a practical design. The second key design component is the colour, which offers a black finish and red lights as an excellent contrast. This is guaranteed in addition to the two bright LED fan in the front frame elements. The I/O panel in the lid holds the audio ports, and the USB 2.0 and USB 3.0 ports.
The black Mainboard tray is not only eye-catching, but also is practical. First, it is comparable in length and has space for large graphics cards and various brackets for cable attachment. On the other hand, the frame has a cutout for easy installation of a CPU backplate.
- Dimensions: 195 x 472 x 505 mm (W x H x D)
- Material: Steel
- Weight: 7kg
- Motherboard Support: ATX, Micro ATX
- Side Cooling: 1x 120mm (20.9 dB(A) 1200RPM Red LED)
- Rear Cooling: 1x 120mm (20.9 dB (A), 1.200 RPM Red LED)
- Top Cooling: 1x 140mm (25 dB(A), 1200RPM Red LED)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- Drive Bays: 9 x 5.25 (external, max) / 1 x 3.5 inches (external, in the 5.25-inch slot) / 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 3.0 / 1x USB 2.0 / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £44.99 inc VAT.
ORDER NOW
Aerocool Strike-X GT Midi Tower Case - Black/Red @ £43.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available. Just like most Mid-Tower cases from AeroCool, the Strike-X GT is constructed in 0.6mm SECC Japanese steel and beautifully finished both inside and out. The case is available in two different internal colours; red and black. Both are supplied with two red LED fans to bring out the gamer in you.
The Strike-X GT has been designed to be user friendly with its great expandability and versatility. The screw-less feature and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy with which to work. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also pre-drilled on the motherboard tray for ease of CPU cooler installation and removal.
This chassis offers plenty of space for installation of components. At the front of the case are seven usable 5.25" drive bays (three external) and all are supplied with adapters to allow mounting of 3.5" or 2.5" devices. Also each adapter allows for a 120mm fan to be installed, giving the option of installing two additional 120mm fans. For users with large graphics cards, the Strike-X GT can accommodate cards up to a total of 290mm in length.
To keep temperatures down, there are five locations for installing case fans. In addition to the fans mentioned above, you can install two 120mm fans at the front (one supplied), two 120mm fan on the roof (not supplied), one 120mm or 140mm on the bottom (not supplied), two 120mm on the side panel (not supplied) and one 120mm fan LED fan at the rear (supplied).
On the top of the case you can expect to find three USB2 ports, one USB3 and headphone and Mic ports for easy access.
- Material: SECC 0.6mm Japanese Steel
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 465(H) x 190(W) x 490(D)mm
- Drive Bays: 3 x 5.25" (external) and?6x 3.5" (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 295mm
- I/O Ports: 1x USB3, 3 x USB2, Mic and headphone
- Cooling options: Front - 2x 120mm LED fans (one supplied)
- Rear Cooling: 1x 120mm LED fan (supplied)
- Side Cooling: 2x 120mm LED fan (not supplied),
- Top Cooling: 2x 120mm fans (not supplied)
- Bottom Cooling: 1x 120/140mm fan (not supplied)
- 120mm Fan Specs: 1200 RPM, 39.0 CFM, 23.0 dBA
- Warranty: 24 months
Only £43.99 inc VAT.
ORDER NOW
Aerocool Strike-X GT Midi Tower Case - Black @ £43.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available. Just like most Mid-Tower cases from AeroCool, the Strike-X GT is constructed in 0.6mm SECC Japanese steel and beautifully finished both inside and out. The case is available in two different internal colours; red and black. Both are supplied with two red LED fans to bring out the gamer in you. The Strike-X GT has been designed to be user friendly with its great expandability and versatility. The screw-less feature and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy with which to work. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also pre-drilled on the motherboard tray for ease of CPU cooler installation and removal.
This chassis offers plenty of space for installation of components. At the front of the case are seven usable 5.25" drive bays (three external) and all are supplied with adapters to allow mounting of 3.5" or 2.5" devices. Also each adapter allows for a 120mm fan to be installed, giving the option of installing two additional 120mm fans. For users with large graphics cards, the Strike-X GT can accommodate cards up to a total of 290mm in length.
To keep temperatures down, there are five locations for installing case fans. In addition to the fans mentioned above, you can install two 120mm fans at the front (one supplied), two 120mm fan on the roof (not supplied), one 120mm or 140mm on the bottom (not supplied), two 120mm on the side panel (not supplied) and one 120mm fan LED fan at the rear (supplied).
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 465(H) x 190(W) x 490(D)mm
- Drive Bays: 3x 5.25" (external) and?6x 3.5" (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 295mm
- I/O Ports: 1x USB3, 3 x USB2, Mic and headphone
- Front Cooling: 2x 120mm LED fans (one supplied)
- Rear Cooling: 1x 120mm LED fan (supplied)
- Side Cooling: 2x 120mm LED fan (not supplied)
- Top Cooling: 2x 120mm fans (not supplied)
- Bottom Cooling: 1x 120/140mm fan (not supplied)
- 120mm Fan Specs: 1200 RPM, 39.0 CFM, 23.0 dBA
Only £43.99 inc VAT.
ORDER NOW
Aerocool Strike-X ONE Midi Tower Case - Black @ £30.98 inc VAT
The Strike X-One Advanced Midi Tower from Aerocool is a very value minded case that scores well with a particular functional design and extensive venting options.
- All black chassis interior (0.5mm thickness)
- Supports Long VGA Cards up to 400mm
- USB2.0 x 2 + Audio (HD) + Mic
- Includes 1 x 12cm Black fan (Back)
- Dust filter for PSU
- 4 x ODD screw-less kit
- 6 x 5 1/4" < 3 1/2" convertor brackets – can be used as fan adaptor, can install 3.5" HDDs and 5" HDDs and can be used to install floppy or card reader.
- Cable Routing Management (pre-drilled holes on the MB plate)
- Pre-drilled CPU holes for easy mounting and removable of CPU cooler
- Motherboard Support: Micro ATX/ATX
- Dimensions: 440mm (H) x 180mm (W) x 475mm (D)
- Drive Bays: 4 x 5.25" (Exposed) / 6 x 3.5" HDD or 2.5 HDD
- Expansion Slots: 7
- Max length space available for PCI slots: 400mm
- I/O Ports: 2x USB2.0 / Audio+Mic
Only £30.98 inc VAT.
ORDER NOW
Aerocool Strike-X ONE Advance Midi Tower Case - Black @ £32.99 inc VAT
The Strike X-One Advanced Midi Tower from Aerocool is a very value minded case that scores well with a particular functional design and extensive venting options.
- All black chassis interior (0.5mm thickness)
- Supports Long VGA Cards up to 400mm
- USB2.0 x 2 + Audio (HD) + Mic
- Includes 1 x 12cm Black fan (Back)
- Dust filter for PSU
- 4 x ODD screw-less kit
- 6 x 5 1/4" < 3 1/2" convertor brackets – can be used as fan adaptor, can install 3.5" HDDs and 5" HDDs and can be used to install floppy or card reader.
- Cable Routing Management (pre-drilled holes on the MB plate)
- Pre-drilled CPU holes for easy mounting and removable of CPU cooler
- Motherboard Support: Micro ATX/ATX
- Dimensions: 440mm (H) x 180mm (W) x 475mm (D)
- Drive Bays: 4 x 5.25" (Exposed) / 6 x 3.5" HDD or 2.5 HDD
- Expansion Slots: 7
- Max length space available for PCI slots: 400mm
- I/O Ports: 2x USB3.0 / Audio+Mic
Only £32.99 inc VAT.
ORDER NOW
Aerocool Strike-X ST Big Tower Case - Black @ £134.98 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available.
The first thing to mention about the AeroCool Strike-X ST Ultimate Gaming Tower Case is that it is big. It stands 635mm tall, 700mm deep and 230mm wide! But there is a reason for this; the case is designed to accommodate any type of computer system. Features such as being able to install virtually any sized motherboard, two PSUs and up to a total of 21 cooling fans make this a chassis for the extreme enthusiast! The Strike-X ST case has been designed to offer everything a user could possibly want from a case. The HDD dock, USB3, dust filters, built in fan controllers and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy to work with. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also provided on the motherboard tray for ease of CPU cooler installation and removal.
- Material: SECC 0.8mm Japanese Steel
- Motherboards: Micro ATX/ATX/E-ATX/XL-ATX/HPTX
- Case Dimensions: 635mm (H) x 230mm (W) x 700mm (D)
- Drive Bays: 4x 5.25" (Exposed) / 10x 3.5" HDD or 2.5" HDD / 1x 3.5"+2.5" HDD hot swap slot
- Expansion Slots: 10
- Max length space available for PCI slots: 430mm
- I/O Ports: 2 x USB 3.0 / 2x USB2.0 / Audio + Mic
- Front Cooling: 2x 120/140 or 1x 200mm fans (1x 200mm red LED fan supplied)
- Top Cooling: 3x 120/140 or 2x 200mm fans (1x 200mm red LED fan supplied)
- Bottom Cooling: 3x 120/140 or 2x 200mm fans (not supplied)
- Right Side Cooling: 1x 92/120mm fan (not supplied)
- Left Side Cooling: 9x 120mm fans (not supplied)
- Rear Cooling: 1x 120/140mm fan (1x 140mm supplied)
- Behind HDD Rack Cooling: 2x 140mm fans (not supplied)
- 200mm Fan Specs: 800 ±200 RPM, 63.9 CFM, 0.363 mm-H2O, 24.4 dBA
- 140mm Fan Specs: 1500 ±10% RPM, 84.8 CFM, 1.171 mm-H2O, 33.0 dBA
- Warranty: 24 months
Only £134.98 inc VAT.
ORDER NOW
Aerocool Strike-X ST Big Tower Case - Black/Red @ £131.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available.
The first thing to mention about the AeroCool Strike-X ST Ultimate Gaming Tower Case is that it is big. It stands 635mm tall, 700mm deep and 230mm wide! But there is a reason for this; the case is designed to accommodate any type of computer system. Features such as being able to install virtually any sized motherboard, two PSUs and up to a total of 21 cooling fans make this a chassis for the extreme enthusiast! The Strike-X ST case has been designed to offer everything a user could possibly want from a case. The HDD dock, USB3, dust filters, built in fan controllers and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy to work with. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also provided on the motherboard tray for ease of CPU cooler installation and removal.
- Material: SECC 0.8mm Japanese Steel
- Motherboards: Micro ATX/ATX/E-ATX/XL-ATX/HPTX
- Case Dimensions: 635mm (H) x 230mm (W) x 700mm (D)
- Drive Bays: 4x 5.25" (Exposed) / 10x 3.5" HDD or 2.5" HDD / 1x 3.5"+2.5" HDD hot swap slot
- Expansion Slots: 10
- Max length space available for PCI slots: 430mm
- I/O Ports: 2 x USB 3.0 / 2x USB2.0 / Audio + Mic
- Front Cooling: 2x 120/140 or 1x 200mm fans (1x 200mm red LED fan supplied)
- Top Cooling: 3x 120/140 or 2x 200mm fans (1x 200mm red LED fan supplied)
- Bottom Cooling: 3x 120/140 or 2x 200mm fans (not supplied)
- Right Side Cooling: 1x 92/120mm fan (not supplied)
- Left Side Cooling: 9x 120mm fans (not supplied)
- Rear Cooling: 1x 120/140mm fan (1x 140mm supplied)
- Behind HDD Rack Cooling: 2x 140mm fans (not supplied)
- 200mm Fan Specs: 800 ±200 RPM, 63.9 CFM, 0.363 mm-H2O, 24.4 dBA
- 140mm Fan Specs: 1500 ±10% RPM, 84.8 CFM, 1.171 mm-H2O, 33.0 dBA
- Warranty: 24 months
Only £131.99 inc VAT.
ORDER NOW
Aerocool Vs-3 Midi Tower Case - Black @ £32.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1 x 120mm (rear, 23 dB(A), 1,200RPM)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1 x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2 x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 2.0 / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Only £32.99 inc VAT.
ORDER NOW
Aerocool Vs-3 Advance Midi Tower Case - Black @ £34.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (23 dB(A) 1200 RPM)
- Front Cooling: 1x 120mm (Blue LED) 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 3.0 (externally and internally to bind) / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Only £34.99 inc VAT.
ORDER NOW
Aerocool Vs-4 Midi Tower Case - Black @ £27.98 inc VAT
AeroCool's VS4 is a great value gaming case which is solidly constructed with 0.5mm Japanese steel and is beautifully finished in an all-black interior. It provides great expandability and versatility as it offers support for four 5.25" devices and five 3.5" HDDs. The bottom three HDDs are installed into a cage which can be rotated to optimise airflow. The VS4 also supports high end graphics cards up to 290mm in length.
The VS4 provides the opportunity for the user to install up to a maximum of four case fans: 1 x 120mm intake front fan (not supplied), 2 x 120mm side panel fans (not supplied), 1 x 120mm back exhaust fan (supplied).
Ease of installation is also one of the VS4's advance features. The chassis is completely screw-less and cable management clips are pre-mounted on the motherboard plate to reduce the cable clutter inside the chassis. A CPU hole is also cut out on the motherboard plate for easy mounting or assembly of a CPU cooler. The case also features water-cooling tube holes for convenience.
All in all the VS4 represents excellent value for money and wouldn't look out of place next to cases that are twice its price.
- Material: SECC 0.5mm
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 433(H) x 185(W) x 495(D)
- Drive Bays: 4 x 5.25" (external) / 5 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 290mm / 430mm (FDD rack removed)
- I/O Ports: 2 x USB2.0 / Mic & headphone (AC97 & HD audio)
- Fan Cooling: 120 x 120 x 25mm (1500 RPM ± 10% / Air Flow (CFM):58.3 / Air pressure: 2.1mm H2O / Noise (dBA): 26.7
- Bearing: Sleeve
Only £27.98 inc VAT.
ORDER NOW
Aerocool Vs-4w Midi-Tower Windowed Case - Black @ £29.99 inc VAT
This case is one fo the best value cases in the market today, if not THE BEST! The chassis is solidly constructed with 0.5mm SGCC. It is also beautifully finished with "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiast. It has great expandability and versatility. The chassis supports 4 x 5.25" devices and 5 x 3.5" HDD's. The VS-4 also supports long high end VGA cards up to 290mm. If you remove the FDD rack this is increased to 430mm in length. Airflow is unrivalled in this chassis with the ability to install 4 x 120mm fans.
- High performance "Mid-Tower" for gamers and enthusiast.
- Solidly constructed chassis – 0.5mm SGCC.
- ALL BLACK interior for a unique touch!
- Supports longer high-end VGA cards up to 290 mm/430mm (FDD rack removed).
- Supports 4 x 5 1/4" bays and maximum 5 x 3.5" HDDs (internal)
- 90 degree retractable HDD bracket.
- "Easy-install" screw-less kits for the 5 1/4" devices
- Pre-drilled cable management holes.
- CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly
- Install up to 2 x12cm fans at side panel (optional) / 1x12cm at rear (included) / 1x12cm fan in front (optional)
- Bottom PSU position enables PSUs to suck in cold air for better cooling.
- Water-cooling holes are pre-drilled to support water-cooling systems
- 2 x USB/ Audio+Mic (AC’97 + HD audio)
Only £29.99 inc VAT.
ORDER NOW
Aerocool Vx-e Advance Midi Tower Case - Black @ £36.98 inc VAT
Aerocools new VX-E advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- "Wing" design mesh side panel w/options to install 2x12 or 14 cm fans
- 5 x 5 1/4" bays for max. expandability
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes 4 x 5.25" (Exposed)?1 x 3.25" FDD(Exposed)?4 x 3.5" HDD(Internal)
- Includes USBs/audio/mic
- The chassis is beautifully finished in black(both exterior and interior
- Includes Dust Filter for the bottom PSU
Only £36.98 inc VAT.
ORDER NOW
Aerocool Vx-e Pro Advance Midi Tower Case - Black @ £41.99 inc VAT
Aerocools new VX-E Pro advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- Bright mirror black side panel design w/1x 20cm fans
- 5 x 5 1/4" bays for max. expandability
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes 4x 5.25"(Exposed) +1x 3.25" FDD(Exposed) + 4x 3.5" HDD(Internal)
- Includes USBs/audio/mic
- The chassis is beautifully finished in black(both exterior and interior
- Includes Dust Filter for the bottom PSU
Only £41.99 inc VAT.
ORDER NOW
Aerocool Vx-R Advance Midi Tower Case - Black @ £34.99 inc VAT
Aerocools new VX-R advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- Mesh side panel with options to install 1x12cm or 14cm fan
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes USBs/audio/mic
- Includes a fan controller to control all fans (up to 20Watts) Stop mode; stop all fans Cruise mode
- All fans rotate at 60% of max. speed (silent mode) Turbo mode
- All fans rotate at max. speed (gaming and overclocking)
- The chassis is beautifully finished in black(both exterior and interior)
- Includes Dust Filter for the bottom PSU
Only £34.99 inc VAT.
ORDER NOW
Aerocool Vs-9 Advance Midi Tower Case - Black @ £39.95 inc VAT
The VS-9 is a superb gaming case which is affordable for everyone. This case is one of the best values cases in the market tday, if not the best value case! The chassis is solidly constructed with 0.6mm Jap Steel. It is also beautifully finished with an "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiasts. It has great expandability and versatility. This chassis also supports long high end VGA cards up to 295mm.
- Dimensions: 195 x 430 x 493 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (26.7 dB (A), 1.500 U / min)
- Front Cooling: 1x 120mm (optional)
- Side Cooling: 2x 140/120 mm (optional)
- Bottom Cooling: 1x 140/120 mm (optional)
- Top Cooling: 2 x 120 mm (optional)
- Air Filter: by the power supply
- Drive Bays: 9x 5.25 (external, max.) / 1 x 3.5 inches (external, in the 5.25-inch slot)
- Internal: 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 2.0 / 1x USB 3.0 (connected internally or externally) / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £39.95 inc VAT.
ORDER NOW
Aerocool Vs-9 Advance Windowed Midi Tower Case - Black @ £43.99 inc VAT
The VS-9 is a superb gaming case which is affordable for everyone. This case is one of the best values cases in the market tday, if not the best value case! The chassis is solidly constructed with 0.6mm Jap Steel. It is also beautifully finished with an "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiasts. It has great expandability and versatility. This chassis also supports long high end VGA cards up to 295mm.
- Dimensions: 195 x 430 x 493 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (26.7 dB (A), 1.500 U / min)
- Front Cooling: 1x 120mm (optional)
- Side Cooling: 2x 140/120 mm (optional)
- Bottom Cooling: 1x 140/120 mm (optional)
- Top Cooling: 2 x 120 mm (optional)
- Air Filter: by the power supply
- Drive Bays: 9x 5.25 (external, max.) / 1 x 3.5 inches (external, in the 5.25-inch slot)
- Internal: 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 2.0 / 1x USB 3.0 (connected internally or externally) / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £43.99 inc VAT.
ORDER NOW
Aerocool Vx-9 Pro Advance Midi-Tower - black @ £44.99 inc VAT
Aerocools new "VX-9 Pro" case is a new model under the PGS-V series. As the named suggests this "lean, mean" and "sylish" machine represents speed, size, performance, quality and value.
Speed: It has 3 speed fan controllers (Stop/Cruse/Turbo Modes) to support up to 20w of power
Size: The VX-9 Pro chassis has 9 x 5.25" bays, one HDD cage which can house up to three HDD's and one set of FDD/HDD adaptors. It is one of the most expandable chassis in the market today.
Performance: The high quality SECC chassiw tih depth of 455mm to support the most high end VGA cards in the market (up to 310mm in length). The VS-9 Pro can pump out airflow like no other. The steel mesh design front panel with dust filters allows maximum air flow. It also supports five 12cm14cm fans. It is a perfect gaming machine!
Quality: The VX-9 Pro case is beautifully finished with mirror finishing front and top panel design. The combination of high quality SECC chassis with no scratch corners and screw less systems make this case an easy install.
Value: Last but not least, this chassis represents great value. It offers the highest CP ratio (Cost to performance ratio) and it is a must have.
Overall the VS-9 Pro chassis is perfect solution for enthusiast and gamers.
- High performance case for gamers and enthusiasts.
- Bright mirror black front and top panel finishing.
- Bright mirror black side panel design w/1x 20cm fans.
- 9 x 5 1/4" bays for max. expandability.
- Solidly constructed screwless chassis.
- Support longer high-end VGA cards up to 307mm.
- Includes 1 sets of 5 1/4" > 3 1/2" convertible adaptors for HDDs or FDD.
- Includes 1 x HDD cage to fit 3 x HDDs (screwless).
- Includes a fan controller to control all fans (up to 20Watts).
- Stop mode - stop all fans
- Cruise mode - all fans rotate at 60% of max. speed (silent mode)
- Turbo mode - all fans rotate at max. speed (gaming and overcloacking)
- Motherboards: ATX / Micro-ATX
- Chassis Dimensions: 452(H) x 210(W) x 492(D)
- Drive Bays: 9 x 5.25" (External) / 1 x 3.5" (External-with adaptor) / 3 x 3 HDD cage
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 307 mm
- I/O Ports: 2 x USB2.0 / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 3 fans simultaneously with max combined wattage of 20W.
Only £44.99 inc VAT.
ORDER NOW
We have updated the Aerocool to include the full range with designs and features to suit all types of people.
Aerocool X-Predator Ultimate Gaming Case - Black @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - Black/Orange @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - Black/Green @ £109.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £109.99 inc VAT.
ORDER NOW
Aerocool X-Predator Ultimate Gaming Case - White @ £118.99 inc VAT
This case is solidly constructed from 0.8mm and 1.0mm Japanese Steel and beautifully finished both inside and out. The X-Predator's are finished in several different colours, covering all tastes. The PCI covers, motherboard plate and screw-less kits are colour coordinated which makes the cases stand out from the crowd as well as making it look unique!
The X-Predator cases are designed with "User-Friendly" concept in mind and give the user great expandability and versatility. Its innovative screw-less features and 90° rotated HDD cage make these chassis' easy to work with. Cable routing holes are pre-cut on the motherboard plate so users can eliminate the cable mess inside the chassis by hiding them behind the motherboard plate. These pre-cut holes are also protected by high quality rubber to prevent damage to the cables. A CPU holes is also pre-cut on the motherboard plate for ease of cooler assembly or removal.
The chassis' offer great expansion capabilities. they support six 5.25" and one 3.5" external devices and six 3.5" hard drives, which also support 2.5" SSDs. The chassis' are also deep and large enough to accommodate high end graphics cards up to 330mm in length. They also support XL-ATX motherboard, such as Gigabyte's X58-UD9 and MSI's Big Bang Marshal. The X-Predator range features 10 PCI slots making it possible for the case to house a Quad graphics card solution. AeroCool also made the cases wide enough to support high end CPU coolers up to 190mm tall.
To maximise air flow there are eight positions for fans, one front LED 230mm fan (supplied), one rear 120/140mm fan (not supplied), one roof black 230mm fan (supplied), one bottom 120/140mm fan (not supplied) and four 120/140mm (or one 180/200mm) fan which can be attached to the side panel (not supplied). Also, the case features two sets of fan controllers to help control the installed fans.
Other advanced features include pre-installed rubber grommets for all HDDs along with a PSU gasket to help reduce vibration during system operation. Quad water-cooling holes are also pre-drilled to support high end water cooling systems. And last but not least the case also has one USB3 port, as well as three USB2 ports, E-SATA and audio ports at the top of the case for convenience.
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - 0.8/1.0mm SECC steel
- Unique and attractive internal colour combination
- High-end graphic card support (up to 330mm)
- High expandability and supports E-ATX and the latest XL-ATX
- Smart cable routing and management
- Rubber grommets for HDDs, case feet and PSU
- Built in 2-channel fan controller
- Easy access top I/O ports with USB3.0 support
- Material: SECC 0.8/1.0mm
- Compatible Motherboards: Flex ATX / ATX / Micro ATX / E-ATX / XL-ATX
- Chassis Dimensions: 600(H) x 234(W) x 555(D)
- Drive Bays: 6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
- Expansion Slots: 10 Slots
- Max length space available for PCI cards: 330mm
- I/O Ports: 1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 6 fans simultaneously with max combined wattage of 20W
- Cooling options: Front - 1 x 23cm fan LED (included), Back - 1 x 12/14cm fan (optional), 4 x 12/14cm fans or / 1 x 18/20cm fan (optional), Top - 1 x 23cm fan (included), Bottom - 1 x 12/14cm fan (optional)
Only £118.99 inc VAT.
ORDER NOW
Aerocool Qs-202 Midi Tower Case - Black @ £39.98 inc VAT
Aerocool is proud to announce the new mini-tower model Qs-202 under the compact case PGS-Q Series (Compact series - Blue Label). Even though Qs-202 is classified under the compact case seriers, but it was designed in a "BIG" way that its versatility,expandability, transportability, protection and performance is no les than most mid-towers in the market today.
The Qs-202 case also delivers optimal air flow and supports longer high end VGA cards up to 390mm (center HDD cage removed). The mini-tower case can support 1 x 14cm fans in front (included(, 1 x 12cm fan in the rear (included), 1 x 12/14cm fan on the side panel (optional) and 1 x 8/12/14cm fan on the top panel. It's mesh front panel also helps to maximize air-intake.
If you are looking for a gaming case with size in mind but do not want to trade off with its internal expandability and versatility then the Qs-202 is the case you MUST NOT miss out on.
- High performance "Mini-Tower" for gamers and enthusiast.
- Solidly constructed chassis – 0.6mm SECC Japanese Steel.
- ALL BLACK interior and "blue" MB plate for an unique touch!
- Supports longer high-end VGA cards up to 390 mm(with HDD cage removed).
- Supports 2 x 5 1/4" , 1 x 3.5"(with adaptor), 1 x 2.5"(with HDD tray) and maximum 6 x 3.5" HDDs (internal)
- 90 degree retractable HDD bracket in “blue” color
- "Easy-install" screw-less kits for the 5 1/4" devices
- Cable management holes are pre-drilled with rubber protection
- CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly
- Can install 1x12/14cm fan at side panel (optional) / 1x12cm at rear (included) / 1x14cm fan in front (included) / and 1x8/12/14cm fan at top panel (optional)
- Bottom PSU position enables PSUs to suck in cold air for better cooling with washable dust filter.
- Water-cooling holes are pre-drilled to support water-cooling systems
- 2 x USB/ Audio+Mic (AC’97 + HD audio) are easily accessible from the top panel.
Only £39.98 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - White @ £69.98 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant white colour. Only the PCI covers, cable management protection rubber, HDD trays and the screw-less kits remain black in colour, cementing its unique look.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £69.98 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - Black/Red @ £59.99 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant black and red colour.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £59.99 inc VAT.
ORDER NOW
AeroCool Sixth Element Full Tower Case - Black/Blue @ £69.98 inc VAT
The Sixth Element is solidly constructed from 0.6mm SECC Japanese steel and beautifully finished in an elegant black and blue colour.
The 6th element is extremely user-friendly and it gives the user great expandability and versatility. The screw-less feature and pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly and removable.
This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length.
The Sixth Element features many key locations for airflow. At the front and roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case and two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system.
- Case Type: Full Tower
- Material: SECC 0.6mm
- Compatible Motherboards: ATX and Micro ATX
- Chassis Dimensions: 510(H) x 197(W) x 530(D)
- Drive Bays: 4 x 5.25" (External) with one 3.5" converter / 6 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI cards: 280 or 400mm with middle HDD cage removed
- I/O Ports: 2 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
- Cooling options: Front - 1 x 140mm LED fan (included), Roof - 1 x 140mm LED fan (included), Back - 1 x 120mm fan (optional), Side panel - 2 x 120mm fan (optional)
Only £69.98 inc VAT.
ORDER NOW
Aerocool Strike-X Advance Midi Tower Case - Black @ £54.98 inc VAT
AeroCool offers the Strike X-series is a whole range of aggressively styled gaming hardware that is already clearly intended as a visual warning signal.
The X-Strike Advance Tower is the perfect base for function and style to bring under one umbrella. For in addition to the design, the mid-tower has a practical design. The second key design component is the colour, which offers a black finish and red lights as an excellent contrast. This is guaranteed in addition to the two bright LED fan in the front frame elements. The I/O panel in the lid holds the audio ports, and the USB 2.0 and USB 3.0 ports.
The black Mainboard tray is not only eye-catching, but also is practical. First, it is comparable in length and has space for large graphics cards and various brackets for cable attachment. On the other hand, the frame has a cutout for easy installation of a CPU backplate.
- Dimensions: 195 x 472 x 505 mm (W x H x D)
- Material: Steel
- Weight: 7kg
- Motherboard Support: ATX, Micro ATX
- Side Cooling: 1x 120mm (20.9 dB(A) 1200RPM Red LED)
- Rear Cooling: 1x 120mm (20.9 dB (A), 1.200 RPM Red LED)
- Top Cooling: 1x 140mm (25 dB(A), 1200RPM Red LED)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- Drive Bays: 9 x 5.25 (external, max) / 1 x 3.5 inches (external, in the 5.25-inch slot) / 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 3.0 / 1x USB 2.0 / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £54.98 inc VAT.
ORDER NOW
Aerocool Strike-X Advance Midi Tower Case- Red/Black @ £44.99 inc VAT
AeroCool offers the Strike X-series is a whole range of aggressively styled gaming hardware that is already clearly intended as a visual warning signal.
The X-Strike Advance Tower is the perfect base for function and style to bring under one umbrella. For in addition to the design, the mid-tower has a practical design. The second key design component is the colour, which offers a black finish and red lights as an excellent contrast. This is guaranteed in addition to the two bright LED fan in the front frame elements. The I/O panel in the lid holds the audio ports, and the USB 2.0 and USB 3.0 ports.
The black Mainboard tray is not only eye-catching, but also is practical. First, it is comparable in length and has space for large graphics cards and various brackets for cable attachment. On the other hand, the frame has a cutout for easy installation of a CPU backplate.
- Dimensions: 195 x 472 x 505 mm (W x H x D)
- Material: Steel
- Weight: 7kg
- Motherboard Support: ATX, Micro ATX
- Side Cooling: 1x 120mm (20.9 dB(A) 1200RPM Red LED)
- Rear Cooling: 1x 120mm (20.9 dB (A), 1.200 RPM Red LED)
- Top Cooling: 1x 140mm (25 dB(A), 1200RPM Red LED)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- Drive Bays: 9 x 5.25 (external, max) / 1 x 3.5 inches (external, in the 5.25-inch slot) / 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 3.0 / 1x USB 2.0 / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £44.99 inc VAT.
ORDER NOW
Aerocool Strike-X GT Midi Tower Case - Black/Red @ £43.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available. Just like most Mid-Tower cases from AeroCool, the Strike-X GT is constructed in 0.6mm SECC Japanese steel and beautifully finished both inside and out. The case is available in two different internal colours; red and black. Both are supplied with two red LED fans to bring out the gamer in you.
The Strike-X GT has been designed to be user friendly with its great expandability and versatility. The screw-less feature and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy with which to work. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also pre-drilled on the motherboard tray for ease of CPU cooler installation and removal.
This chassis offers plenty of space for installation of components. At the front of the case are seven usable 5.25" drive bays (three external) and all are supplied with adapters to allow mounting of 3.5" or 2.5" devices. Also each adapter allows for a 120mm fan to be installed, giving the option of installing two additional 120mm fans. For users with large graphics cards, the Strike-X GT can accommodate cards up to a total of 290mm in length.
To keep temperatures down, there are five locations for installing case fans. In addition to the fans mentioned above, you can install two 120mm fans at the front (one supplied), two 120mm fan on the roof (not supplied), one 120mm or 140mm on the bottom (not supplied), two 120mm on the side panel (not supplied) and one 120mm fan LED fan at the rear (supplied).
On the top of the case you can expect to find three USB2 ports, one USB3 and headphone and Mic ports for easy access.
- Material: SECC 0.6mm Japanese Steel
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 465(H) x 190(W) x 490(D)mm
- Drive Bays: 3 x 5.25" (external) and?6x 3.5" (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 295mm
- I/O Ports: 1x USB3, 3 x USB2, Mic and headphone
- Cooling options: Front - 2x 120mm LED fans (one supplied)
- Rear Cooling: 1x 120mm LED fan (supplied)
- Side Cooling: 2x 120mm LED fan (not supplied),
- Top Cooling: 2x 120mm fans (not supplied)
- Bottom Cooling: 1x 120/140mm fan (not supplied)
- 120mm Fan Specs: 1200 RPM, 39.0 CFM, 23.0 dBA
- Warranty: 24 months
Only £43.99 inc VAT.
ORDER NOW
Aerocool Strike-X GT Midi Tower Case - Black @ £43.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available. Just like most Mid-Tower cases from AeroCool, the Strike-X GT is constructed in 0.6mm SECC Japanese steel and beautifully finished both inside and out. The case is available in two different internal colours; red and black. Both are supplied with two red LED fans to bring out the gamer in you. The Strike-X GT has been designed to be user friendly with its great expandability and versatility. The screw-less feature and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy with which to work. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also pre-drilled on the motherboard tray for ease of CPU cooler installation and removal.
This chassis offers plenty of space for installation of components. At the front of the case are seven usable 5.25" drive bays (three external) and all are supplied with adapters to allow mounting of 3.5" or 2.5" devices. Also each adapter allows for a 120mm fan to be installed, giving the option of installing two additional 120mm fans. For users with large graphics cards, the Strike-X GT can accommodate cards up to a total of 290mm in length.
To keep temperatures down, there are five locations for installing case fans. In addition to the fans mentioned above, you can install two 120mm fans at the front (one supplied), two 120mm fan on the roof (not supplied), one 120mm or 140mm on the bottom (not supplied), two 120mm on the side panel (not supplied) and one 120mm fan LED fan at the rear (supplied).
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 465(H) x 190(W) x 490(D)mm
- Drive Bays: 3x 5.25" (external) and?6x 3.5" (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 295mm
- I/O Ports: 1x USB3, 3 x USB2, Mic and headphone
- Front Cooling: 2x 120mm LED fans (one supplied)
- Rear Cooling: 1x 120mm LED fan (supplied)
- Side Cooling: 2x 120mm LED fan (not supplied)
- Top Cooling: 2x 120mm fans (not supplied)
- Bottom Cooling: 1x 120/140mm fan (not supplied)
- 120mm Fan Specs: 1200 RPM, 39.0 CFM, 23.0 dBA
Only £43.99 inc VAT.
ORDER NOW
Aerocool Strike-X ONE Midi Tower Case - Black @ £30.98 inc VAT
The Strike X-One Advanced Midi Tower from Aerocool is a very value minded case that scores well with a particular functional design and extensive venting options.
- All black chassis interior (0.5mm thickness)
- Supports Long VGA Cards up to 400mm
- USB2.0 x 2 + Audio (HD) + Mic
- Includes 1 x 12cm Black fan (Back)
- Dust filter for PSU
- 4 x ODD screw-less kit
- 6 x 5 1/4" < 3 1/2" convertor brackets – can be used as fan adaptor, can install 3.5" HDDs and 5" HDDs and can be used to install floppy or card reader.
- Cable Routing Management (pre-drilled holes on the MB plate)
- Pre-drilled CPU holes for easy mounting and removable of CPU cooler
- Motherboard Support: Micro ATX/ATX
- Dimensions: 440mm (H) x 180mm (W) x 475mm (D)
- Drive Bays: 4 x 5.25" (Exposed) / 6 x 3.5" HDD or 2.5 HDD
- Expansion Slots: 7
- Max length space available for PCI slots: 400mm
- I/O Ports: 2x USB2.0 / Audio+Mic
Only £30.98 inc VAT.
ORDER NOW
Aerocool Strike-X ONE Advance Midi Tower Case - Black @ £32.99 inc VAT
The Strike X-One Advanced Midi Tower from Aerocool is a very value minded case that scores well with a particular functional design and extensive venting options.
- All black chassis interior (0.5mm thickness)
- Supports Long VGA Cards up to 400mm
- USB2.0 x 2 + Audio (HD) + Mic
- Includes 1 x 12cm Black fan (Back)
- Dust filter for PSU
- 4 x ODD screw-less kit
- 6 x 5 1/4" < 3 1/2" convertor brackets – can be used as fan adaptor, can install 3.5" HDDs and 5" HDDs and can be used to install floppy or card reader.
- Cable Routing Management (pre-drilled holes on the MB plate)
- Pre-drilled CPU holes for easy mounting and removable of CPU cooler
- Motherboard Support: Micro ATX/ATX
- Dimensions: 440mm (H) x 180mm (W) x 475mm (D)
- Drive Bays: 4 x 5.25" (Exposed) / 6 x 3.5" HDD or 2.5 HDD
- Expansion Slots: 7
- Max length space available for PCI slots: 400mm
- I/O Ports: 2x USB3.0 / Audio+Mic
Only £32.99 inc VAT.
ORDER NOW
Aerocool Strike-X ST Big Tower Case - Black @ £134.98 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available.
The first thing to mention about the AeroCool Strike-X ST Ultimate Gaming Tower Case is that it is big. It stands 635mm tall, 700mm deep and 230mm wide! But there is a reason for this; the case is designed to accommodate any type of computer system. Features such as being able to install virtually any sized motherboard, two PSUs and up to a total of 21 cooling fans make this a chassis for the extreme enthusiast! The Strike-X ST case has been designed to offer everything a user could possibly want from a case. The HDD dock, USB3, dust filters, built in fan controllers and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy to work with. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also provided on the motherboard tray for ease of CPU cooler installation and removal.
- Material: SECC 0.8mm Japanese Steel
- Motherboards: Micro ATX/ATX/E-ATX/XL-ATX/HPTX
- Case Dimensions: 635mm (H) x 230mm (W) x 700mm (D)
- Drive Bays: 4x 5.25" (Exposed) / 10x 3.5" HDD or 2.5" HDD / 1x 3.5"+2.5" HDD hot swap slot
- Expansion Slots: 10
- Max length space available for PCI slots: 430mm
- I/O Ports: 2 x USB 3.0 / 2x USB2.0 / Audio + Mic
- Front Cooling: 2x 120/140 or 1x 200mm fans (1x 200mm red LED fan supplied)
- Top Cooling: 3x 120/140 or 2x 200mm fans (1x 200mm red LED fan supplied)
- Bottom Cooling: 3x 120/140 or 2x 200mm fans (not supplied)
- Right Side Cooling: 1x 92/120mm fan (not supplied)
- Left Side Cooling: 9x 120mm fans (not supplied)
- Rear Cooling: 1x 120/140mm fan (1x 140mm supplied)
- Behind HDD Rack Cooling: 2x 140mm fans (not supplied)
- 200mm Fan Specs: 800 ±200 RPM, 63.9 CFM, 0.363 mm-H2O, 24.4 dBA
- 140mm Fan Specs: 1500 ±10% RPM, 84.8 CFM, 1.171 mm-H2O, 33.0 dBA
- Warranty: 24 months
Only £134.98 inc VAT.
ORDER NOW
Aerocool Strike-X ST Big Tower Case - Black/Red @ £131.99 inc VAT
Introducing the new Strike-X series from AeroCool - the ultimate gaming equipment for gamers and enthusiasts world-wide! The Strike-X series includes a wide range of gaming equipment from cases to PSUs to fan controllers to speakers, in fact everything the gamer would require will soon be available.
The first thing to mention about the AeroCool Strike-X ST Ultimate Gaming Tower Case is that it is big. It stands 635mm tall, 700mm deep and 230mm wide! But there is a reason for this; the case is designed to accommodate any type of computer system. Features such as being able to install virtually any sized motherboard, two PSUs and up to a total of 21 cooling fans make this a chassis for the extreme enthusiast! The Strike-X ST case has been designed to offer everything a user could possibly want from a case. The HDD dock, USB3, dust filters, built in fan controllers and pre-drilled holes on the motherboard tray for cable routing make this chassis a joy to work with. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also provided on the motherboard tray for ease of CPU cooler installation and removal.
- Material: SECC 0.8mm Japanese Steel
- Motherboards: Micro ATX/ATX/E-ATX/XL-ATX/HPTX
- Case Dimensions: 635mm (H) x 230mm (W) x 700mm (D)
- Drive Bays: 4x 5.25" (Exposed) / 10x 3.5" HDD or 2.5" HDD / 1x 3.5"+2.5" HDD hot swap slot
- Expansion Slots: 10
- Max length space available for PCI slots: 430mm
- I/O Ports: 2 x USB 3.0 / 2x USB2.0 / Audio + Mic
- Front Cooling: 2x 120/140 or 1x 200mm fans (1x 200mm red LED fan supplied)
- Top Cooling: 3x 120/140 or 2x 200mm fans (1x 200mm red LED fan supplied)
- Bottom Cooling: 3x 120/140 or 2x 200mm fans (not supplied)
- Right Side Cooling: 1x 92/120mm fan (not supplied)
- Left Side Cooling: 9x 120mm fans (not supplied)
- Rear Cooling: 1x 120/140mm fan (1x 140mm supplied)
- Behind HDD Rack Cooling: 2x 140mm fans (not supplied)
- 200mm Fan Specs: 800 ±200 RPM, 63.9 CFM, 0.363 mm-H2O, 24.4 dBA
- 140mm Fan Specs: 1500 ±10% RPM, 84.8 CFM, 1.171 mm-H2O, 33.0 dBA
- Warranty: 24 months
Only £131.99 inc VAT.
ORDER NOW
Aerocool Vs-3 Midi Tower Case - Black @ £32.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1 x 120mm (rear, 23 dB(A), 1,200RPM)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1 x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2 x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 2.0 / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Only £32.99 inc VAT.
ORDER NOW
Aerocool Vs-3 Advance Midi Tower Case - Black @ £34.99 inc VAT
Are you longing for a budget case but without sacrificing tons of good features? Do you want a budget case but does not have a cheap look? Well, look no further. The new released VS-3 and VS-3 Advance are just the cases you want!
VS-3 and VS-3 Advance are designed with gamers in mind. The front panel is designed with strong characteristic and it is just simpy an eye catching piece amongst many others.
With the HDD convertors included in this case, you can easily install up to 6 x 2.5" HDDs or 3.5" HDD's, and also each convertor acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD's generates.
Not only these convertors can be mounted vertically to the front of the case, they can also be mounted to the inner front (first of this kind in the market) of the case so that he fans on the convertors are closer to the motherboard where the components can be cooled more efficiently.
For a budget case, this is the opportunity that is simply just too good to miss.
- Dimensions: 190 x 440 x 480 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 4.6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (23 dB(A) 1200 RPM)
- Front Cooling: 1x 120mm (Blue LED) 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- HDD Cooling: 3 x 120 mm (HDD cage optional)
- Side Cooling: 2x 140/120 mm (optional)
- Drive Bays: 3 x 5.25 inches (external) / 6x 3,5 / 2,5 inch (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 2x USB 3.0 (externally and internally to bind) / 1x each Audio In / Out
- Maximum length of video cards: 275/400 mm
Only £34.99 inc VAT.
ORDER NOW
Aerocool Vs-4 Midi Tower Case - Black @ £27.98 inc VAT
AeroCool's VS4 is a great value gaming case which is solidly constructed with 0.5mm Japanese steel and is beautifully finished in an all-black interior. It provides great expandability and versatility as it offers support for four 5.25" devices and five 3.5" HDDs. The bottom three HDDs are installed into a cage which can be rotated to optimise airflow. The VS4 also supports high end graphics cards up to 290mm in length.
The VS4 provides the opportunity for the user to install up to a maximum of four case fans: 1 x 120mm intake front fan (not supplied), 2 x 120mm side panel fans (not supplied), 1 x 120mm back exhaust fan (supplied).
Ease of installation is also one of the VS4's advance features. The chassis is completely screw-less and cable management clips are pre-mounted on the motherboard plate to reduce the cable clutter inside the chassis. A CPU hole is also cut out on the motherboard plate for easy mounting or assembly of a CPU cooler. The case also features water-cooling tube holes for convenience.
All in all the VS4 represents excellent value for money and wouldn't look out of place next to cases that are twice its price.
- Material: SECC 0.5mm
- Motherboards: ATX and Micro ATX
- Chassis Dimensions: 433(H) x 185(W) x 495(D)
- Drive Bays: 4 x 5.25" (external) / 5 x 3.5" HDDs (internal)
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 290mm / 430mm (FDD rack removed)
- I/O Ports: 2 x USB2.0 / Mic & headphone (AC97 & HD audio)
- Fan Cooling: 120 x 120 x 25mm (1500 RPM ± 10% / Air Flow (CFM):58.3 / Air pressure: 2.1mm H2O / Noise (dBA): 26.7
- Bearing: Sleeve
Only £27.98 inc VAT.
ORDER NOW
Aerocool Vs-4w Midi-Tower Windowed Case - Black @ £29.99 inc VAT
This case is one fo the best value cases in the market today, if not THE BEST! The chassis is solidly constructed with 0.5mm SGCC. It is also beautifully finished with "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiast. It has great expandability and versatility. The chassis supports 4 x 5.25" devices and 5 x 3.5" HDD's. The VS-4 also supports long high end VGA cards up to 290mm. If you remove the FDD rack this is increased to 430mm in length. Airflow is unrivalled in this chassis with the ability to install 4 x 120mm fans.
- High performance "Mid-Tower" for gamers and enthusiast.
- Solidly constructed chassis – 0.5mm SGCC.
- ALL BLACK interior for a unique touch!
- Supports longer high-end VGA cards up to 290 mm/430mm (FDD rack removed).
- Supports 4 x 5 1/4" bays and maximum 5 x 3.5" HDDs (internal)
- 90 degree retractable HDD bracket.
- "Easy-install" screw-less kits for the 5 1/4" devices
- Pre-drilled cable management holes.
- CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly
- Install up to 2 x12cm fans at side panel (optional) / 1x12cm at rear (included) / 1x12cm fan in front (optional)
- Bottom PSU position enables PSUs to suck in cold air for better cooling.
- Water-cooling holes are pre-drilled to support water-cooling systems
- 2 x USB/ Audio+Mic (AC’97 + HD audio)
Only £29.99 inc VAT.
ORDER NOW
Aerocool Vx-e Advance Midi Tower Case - Black @ £36.98 inc VAT
Aerocools new VX-E advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- "Wing" design mesh side panel w/options to install 2x12 or 14 cm fans
- 5 x 5 1/4" bays for max. expandability
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes 4 x 5.25" (Exposed)?1 x 3.25" FDD(Exposed)?4 x 3.5" HDD(Internal)
- Includes USBs/audio/mic
- The chassis is beautifully finished in black(both exterior and interior
- Includes Dust Filter for the bottom PSU
Only £36.98 inc VAT.
ORDER NOW
Aerocool Vx-e Pro Advance Midi Tower Case - Black @ £41.99 inc VAT
Aerocools new VX-E Pro advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- Bright mirror black side panel design w/1x 20cm fans
- 5 x 5 1/4" bays for max. expandability
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes 4x 5.25"(Exposed) +1x 3.25" FDD(Exposed) + 4x 3.5" HDD(Internal)
- Includes USBs/audio/mic
- The chassis is beautifully finished in black(both exterior and interior
- Includes Dust Filter for the bottom PSU
Only £41.99 inc VAT.
ORDER NOW
Aerocool Vx-R Advance Midi Tower Case - Black @ £34.99 inc VAT
Aerocools new VX-R advance case is a new model under the PGS-V Series. As the name suggests this stylish chassos represents performance, quality, flashiness and value.
- High performance case for gamers and enthusiasts
- Bright mirror black front and top panel finishing
- Mesh side panel with options to install 1x12cm or 14cm fan
- Solidly constructed screwless chassis
- Support longer high-end VGA cards up to 310mm
- Includes USBs/audio/mic
- Includes a fan controller to control all fans (up to 20Watts) Stop mode; stop all fans Cruise mode
- All fans rotate at 60% of max. speed (silent mode) Turbo mode
- All fans rotate at max. speed (gaming and overclocking)
- The chassis is beautifully finished in black(both exterior and interior)
- Includes Dust Filter for the bottom PSU
Only £34.99 inc VAT.
ORDER NOW
Aerocool Vs-9 Advance Midi Tower Case - Black @ £39.95 inc VAT
The VS-9 is a superb gaming case which is affordable for everyone. This case is one of the best values cases in the market tday, if not the best value case! The chassis is solidly constructed with 0.6mm Jap Steel. It is also beautifully finished with an "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiasts. It has great expandability and versatility. This chassis also supports long high end VGA cards up to 295mm.
- Dimensions: 195 x 430 x 493 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (26.7 dB (A), 1.500 U / min)
- Front Cooling: 1x 120mm (optional)
- Side Cooling: 2x 140/120 mm (optional)
- Bottom Cooling: 1x 140/120 mm (optional)
- Top Cooling: 2 x 120 mm (optional)
- Air Filter: by the power supply
- Drive Bays: 9x 5.25 (external, max.) / 1 x 3.5 inches (external, in the 5.25-inch slot)
- Internal: 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 2.0 / 1x USB 3.0 (connected internally or externally) / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £39.95 inc VAT.
ORDER NOW
Aerocool Vs-9 Advance Windowed Midi Tower Case - Black @ £43.99 inc VAT
The VS-9 is a superb gaming case which is affordable for everyone. This case is one of the best values cases in the market tday, if not the best value case! The chassis is solidly constructed with 0.6mm Jap Steel. It is also beautifully finished with an "all black" interior and it includes many advanced features even for the most demanding gamers and enthusiasts. It has great expandability and versatility. This chassis also supports long high end VGA cards up to 295mm.
- Dimensions: 195 x 430 x 493 mm (W x H x D)
- Material: Steel
- Color: Black
- Weight: 6 kg
- Form Factor: ATX, Micro ATX
- Rear Cooling: 1x 120mm (26.7 dB (A), 1.500 U / min)
- Front Cooling: 1x 120mm (optional)
- Side Cooling: 2x 140/120 mm (optional)
- Bottom Cooling: 1x 140/120 mm (optional)
- Top Cooling: 2 x 120 mm (optional)
- Air Filter: by the power supply
- Drive Bays: 9x 5.25 (external, max.) / 1 x 3.5 inches (external, in the 5.25-inch slot)
- Internal: 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB 2.0 / 1x USB 3.0 (connected internally or externally) / 1x each Audio In / Out
- Maximum graphics card length: 295 mm
Only £43.99 inc VAT.
ORDER NOW
Aerocool Vx-9 Pro Advance Midi-Tower - black @ £44.99 inc VAT
Aerocools new "VX-9 Pro" case is a new model under the PGS-V series. As the named suggests this "lean, mean" and "sylish" machine represents speed, size, performance, quality and value.
Speed: It has 3 speed fan controllers (Stop/Cruse/Turbo Modes) to support up to 20w of power
Size: The VX-9 Pro chassis has 9 x 5.25" bays, one HDD cage which can house up to three HDD's and one set of FDD/HDD adaptors. It is one of the most expandable chassis in the market today.
Performance: The high quality SECC chassiw tih depth of 455mm to support the most high end VGA cards in the market (up to 310mm in length). The VS-9 Pro can pump out airflow like no other. The steel mesh design front panel with dust filters allows maximum air flow. It also supports five 12cm14cm fans. It is a perfect gaming machine!
Quality: The VX-9 Pro case is beautifully finished with mirror finishing front and top panel design. The combination of high quality SECC chassis with no scratch corners and screw less systems make this case an easy install.
Value: Last but not least, this chassis represents great value. It offers the highest CP ratio (Cost to performance ratio) and it is a must have.
Overall the VS-9 Pro chassis is perfect solution for enthusiast and gamers.
- High performance case for gamers and enthusiasts.
- Bright mirror black front and top panel finishing.
- Bright mirror black side panel design w/1x 20cm fans.
- 9 x 5 1/4" bays for max. expandability.
- Solidly constructed screwless chassis.
- Support longer high-end VGA cards up to 307mm.
- Includes 1 sets of 5 1/4" > 3 1/2" convertible adaptors for HDDs or FDD.
- Includes 1 x HDD cage to fit 3 x HDDs (screwless).
- Includes a fan controller to control all fans (up to 20Watts).
- Stop mode - stop all fans
- Cruise mode - all fans rotate at 60% of max. speed (silent mode)
- Turbo mode - all fans rotate at max. speed (gaming and overcloacking)
- Motherboards: ATX / Micro-ATX
- Chassis Dimensions: 452(H) x 210(W) x 492(D)
- Drive Bays: 9 x 5.25" (External) / 1 x 3.5" (External-with adaptor) / 3 x 3 HDD cage
- Expansion Slots: 7 Slots
- Max length space available for PCI slots: 307 mm
- I/O Ports: 2 x USB2.0 / Mic & headphone (AC97 & HD audio)
- Fan controller: Controls 3 fans simultaneously with max combined wattage of 20W.
Only £44.99 inc VAT.
ORDER NOW
