warm PSU

[yoda]

ok, I got P4 northwood 2.66 running at 2.9, FSB from 133 to 145, quad pumped from 533 to 580... ram is PC3200 was at 333 but not sure what it now running at sice these P4's have confused me for FSB/RAM bus speeds... both still at default speeds...

I got an X1650 pro that over clocked but not overvolted (yet)...
hauparge freeview tuner vard...

Asus 16X DVD RW
liton 52X48X52
80Gb western digital IDE HD
200GB samsung SATA
LS120

3 red case neons....
2 X 120mm fans
1 X water pump

CPU hovers between 30 - 35C regaurdless of wether the rad fan is on high or low...

the problem is as follows...

Voltage 1 = 1.49
Voltage 2 = 1.49
Voltage 3 = 2.66
5V = 5.03V
12V = 11.67V
-12V = -11.94V
5V = 4.98V
3.3V = 3.16V

The exaust air out the back of the PSU is around 40C under load...
it's a generic 300W PSU...

I'm guessing I'm at the limit of what the PSU can deliver?????

 

[Will_3rd]

Those rails aren't looking particularly amazing, might be time to upgrade to a better brand/model.

 

[yoda]

Thaught so... what can I say, after a mate dropped and therefor trashed my PC, I've had to build one up, Moneys tight atm... I got this 300W PSU for £5 new so it was a bargin.... lol
my PC has been built up by buying CPU, mobo and ram off a well known auction site, assembling, testing and then selling back... so effectively, my PC was/is free....

ok, go hunt for new PSU...