Watercool Build on the way

Associate
Joined
4 Mar 2007
Posts
129
Location
North West
Well I have bought all of my parts now. I am just waiting for the PA120.3 to come back in stock

1 x Zalman ZM-MFC1 Plus Black
2 x Feser One - F1 - Cooling Fluid - UV BLUE 1ltr
6 x YATE LOON 120mm - D12SM-12
10 x Masterkleer 7/16" ID 5/8" OD PVC Tubing
1 x Rad Brackets - External Radiator Mounting
1 x Watercool HeatKiller CPU LGA1366 Rev. 3.0 LT
1 x PrimoChill Anti-Kink Coils - 5/8" OD Tubing - UV Blue
1 x Laing DDC 18w Pump / Swiftech MCP355
- Aftermarket Top: XSPC DDC Top With RESERVOIR
- Barb Size for Selected Top: 1/2"
2 x DTEK G1/4" Hi-Flow 1/2" Barb
1 x 12-20mm Hoseclips Pack of 10
1 x Arctic Silver Arctic CERAMIQUE - 2.5g

and some additional cables to help with cable management round the back.

Akasa 20/24-Pin 30cm PSU Extension Cable £3.99 x1
Akasa 8-Pin 30cm PSU Extension Cable £2.99 1x
Akasa AK-H254 60CM 3-Pin Fan Extension Cable x6

I cant wait to start putting it together :)
 
Last edited:
The most important thing is you've taken the first step, I wish you luck :)

While I'd not necessarily go along with all the parts you've selected much is down to personal taste. Some comments:

Double check that you get, or remember to buy the 3/8" BSPT/NPT fittings for the rad, eg http://www.overclockers.co.uk/showproduct.php?prodid=WC-003-TO&groupid=701&catid=193&subcat=1049 .

Heatkiller rev3.0 LT, very nice and seldom seen in the uk. I have the AM2 version :)

7/16 tube and 1/2 barbs, you'll need towels and plenty of hot water :D. You probably don't need the hose clips, indeed a knife may be required if you ever need to remove the tube :eek:

\o/ Yate Loons \o/
 
Is it me or have you bought 10m of tubing? Are you planning on taking it apart often and replacing with fresh tube? But then again you have specced hoseclips, so you won't be relying on the shrink fit nature of 7/16" masterkleer anyway, and thus could re-use the sections of tube?

BTW you have left a competitor name in your list of stuff, see if you can spot it ;)
 
The most important thing is you've taken the first step, I wish you luck :)

While I'd not necessarily go along with all the parts you've selected much is down to personal taste. Some comments:

Double check that you get, or remember to buy the 3/8" BSPT/NPT fittings for the rad, eg http://www.overclockers.co.uk/showproduct.php?prodid=WC-003-TO&groupid=701&catid=193&subcat=1049 .

Heatkiller rev3.0 LT, very nice and seldom seen in the uk. I have the AM2 version :)

7/16 tube and 1/2 barbs, you'll need towels and plenty of hot water :D. You probably don't need the hose clips, indeed a knife may be required if you ever need to remove the tube :eek:

\o/ Yate Loons \o/

Thanks for your comments.

Yes I will be ordering the barbs with the rad one it is back in stock. I have just got some hose clips as an extra precaution, you cant be too carefull lol.

Is it me or have you bought 10m of tubing? Are you planning on taking it apart often and replacing with fresh tube? But then again you have specced hoseclips, so you won't be relying on the shrink fit nature of 7/16" masterkleer anyway, and thus could re-use the sections of tube?

BTW you have left a competitor name in your list of stuff, see if you can spot it ;)

No I have ordered 10 feet of tubing just incase of any wastage.

Yeah good spot lol. Wooopsi :p
 
lol @ Bubo :D Love the franglaise

Sry I didn't realise I had broken a rule by pointing out which it was, I'll be more careful/ less dim in future :D
 
Back
Top Bottom