Soldato
My setup the other day before some bad ram killed my motherboard
Has been dismantled since then.
Watercooled Case Gallery
- Thread starter MikeTimbers
- Start date
My setup the other day before some bad ram killed my motherboard
Has been dismantled since then.
Soldato
Me again...
Added a PA120.2 on the back and moved the res to a better position.
Daylight
Underglow white neons! Plus UV cathodes inside.
Coming soon, mods to the front of the case, aswell as the top.
Added a PA120.2 on the back and moved the res to a better position.
Daylight
Underglow white neons! Plus UV cathodes inside.
Coming soon, mods to the front of the case, aswell as the top.
Soldato
Thought I'd update mine. It's not one for the purists, but who cares.
Spot the new tubing...
Spot the new tubing...
Don
My new watercooled build.
Jokester
Sorry for the poor IQ, I don't have a digicam anymore. I will try to get some better shots in the future.
Spec:
Lian LI V1200
Thermochill PA120.2
Laing DDC Ultra 18W with Alphacool Reservoir top
EK Full Cover 8800 GTX Block with Acetal top
2 litres Feser fluid
FuZion CPU Block
Spec:
Lian LI V1200
Thermochill PA120.2
Laing DDC Ultra 18W with Alphacool Reservoir top
EK Full Cover 8800 GTX Block with Acetal top
2 litres Feser fluid
FuZion CPU Block
Associate
Well this is my 1st water cooled build. It wasn't easy glad I had a lot of help from my dad who helped loads with modding my PC-7 to accommodate the radiator.
Spec
D-Tek Fuzion CPU Block
Swiftech Micro Res
Thermochill PA120.2 w/ 2x Scythe S-Flex 1600 RPM Fans
Laing DDC 12v 18W pump with XSPC top.
Compatible ThermoChill Rad Grille
Masterkleer 7/16" Tubing
Feser One Fluid (Meant to be yellow but looks green.)
Pictures
The Twin rad in the roof:
Not a lot of room at all, so the PSU needed to be modded in order to get the PCI-E connector in:
Used some long bolts in order to slide the PSU out enough to get the modular cables in.
The noise of the pump was deafening, I didnt really get any sort of mounting equipment with it so I had to improvise.
A little left over hose worked a treat and I cant hear the pump at all, even when the fans are all set to low on the controller.
Spec
D-Tek Fuzion CPU Block
Swiftech Micro Res
Thermochill PA120.2 w/ 2x Scythe S-Flex 1600 RPM Fans
Laing DDC 12v 18W pump with XSPC top.
Compatible ThermoChill Rad Grille
Masterkleer 7/16" Tubing
Feser One Fluid (Meant to be yellow but looks green.)
Pictures
The Twin rad in the roof:
Not a lot of room at all, so the PSU needed to be modded in order to get the PCI-E connector in:
Used some long bolts in order to slide the PSU out enough to get the modular cables in.
The noise of the pump was deafening, I didnt really get any sort of mounting equipment with it so I had to improvise.
A little left over hose worked a treat and I cant hear the pump at all, even when the fans are all set to low on the controller.
Mini update -
Added XSPC single bayres instead of the EK multires.
Got some 9200 OCZ flex watercooled now aswell but things are starting to get a little cramped inside (never thought I would say that about hte UFO tbh!). I put the flex on the CPU loop as theres a PA120.3 cooling the cpu alone which is overkill. CPU temps havn't changed one bit either which is nice.
Added XSPC single bayres instead of the EK multires.
Got some 9200 OCZ flex watercooled now aswell but things are starting to get a little cramped inside (never thought I would say that about hte UFO tbh!). I put the flex on the CPU loop as theres a PA120.3 cooling the cpu alone which is overkill. CPU temps havn't changed one bit either which is nice.
Last edited:
Soldato
Hi, my humble first attempt:
ChrisC
ChrisC
Last edited:
Associate
My first water cooling build... (CLICK HERE FOR THE FULL BUILD LOG)
Spec:
Q6600 @ 3.8ghz
Asus P5K-Premium - Black Pearl
2gb Geil Ultra PC6400 @ 950mhz (5-5-5-15)
Akasa Eclipse 62 - Modded for Water by me
Silverstone OP 750W
Thermochill PA120.2
Laing DDC2 - c/w Acrylic Alphacool Top
D-Tek Fuzion CPU Block - c/w Nozzle Kit
XSPC Bay Reservior
XSPC UV Blue Tubing
2x Yate Loon 120mm UV Blue & Led
Spec:
Q6600 @ 3.8ghz
Asus P5K-Premium - Black Pearl
2gb Geil Ultra PC6400 @ 950mhz (5-5-5-15)
Akasa Eclipse 62 - Modded for Water by me
Silverstone OP 750W
Thermochill PA120.2
Laing DDC2 - c/w Acrylic Alphacool Top
D-Tek Fuzion CPU Block - c/w Nozzle Kit
XSPC Bay Reservior
XSPC UV Blue Tubing
2x Yate Loon 120mm UV Blue & Led
Last edited:
Soldato
Here's my little setup. I still can't figure out how to get a clear pic on this darned camera (canon a70)
Soldato
This is from my case project but isnt complete yet , cavalier 3 with yellow & black paint job + side and top window with fill port , still to change new gfx card 8800 gt using a d-tek fuzion gpu ( was going to buy a full coverage block but plenty of people seem to be using gpu only blocks with ramsinks ) ocz memory cooler - 7/16" tubing - blue cathode .
I had to erase a area near the top of the case because someone made me a stainless steel sign and it is a place that sells stuff what ocuk do so i had no choice really .
Will update when rig is complete
.
Mick .
I had to erase a area near the top of the case because someone made me a stainless steel sign and it is a place that sells stuff what ocuk do so i had no choice really .
Will update when rig is complete
.Mick .
Associate
You'd get better temps if you had the pump going to the rad then the CPU.
@andyr, you using 1/2" tubing with the maximus?
Associate
- Joined
- 22 Oct 2007
- Posts
- 118
Retro... this needs a total rebuild now, but 18 months ago it looked a bit like this - modded Akasa UV case:
No problemo i've removed the pic as well but someone else will have to remove the one that someone quoted.
Now that i'm more awake i'll post a couple more pics
This is an Antec P182 SE I modded and watercooled.
I also just posted these pics in the Antec P182 thread
Now that i'm more awake i'll post a couple more pics
This is an Antec P182 SE I modded and watercooled.
I also just posted these pics in the Antec P182 thread
Soldato
Hi, here is my second attempt at water cooling:
External top:
Side/top view:
Barbs:
Closeup of cpu block:
Finished:
Chris
External top:
Side/top view:
Barbs:
Closeup of cpu block:
Finished:
Chris
Soldato
